Building Automation Knowledge Base

Issue General configuration for these controllers. Environment Drayton DC1100 Satchwell DC1400 Cause Access to the documentation unavailable and uncertain of the correct configuration. Resolution The available controller configurations are all shown in the controller data sheets, please select the required data sheet below. To review the Drayton DC1100 general data sheet, please click HERE. To review the Drayton DC1100 "A" data sheet, please click HERE. To review the Satchwell DC1400 general data sheet, please click HERE. To review the Satchwell DC1400 "A" data sheet, please click HERE. For a general overview of the DC1100/DC1400, please click HERE.

Issue The following error asserts when attempting to convert a Cloudscape database to SQL 2005 in the Niagara R2 console window: java.sql.SQLException: Invalid object name STATION_NAME.dbo.sysobjects'. at net.sourceforge.jtds.jdbc.SQLDiagnostic.addDiagnostic(SQLDiagnostic.java:368) at net.sourceforge.jtds.jdbc.TdsCore.tdsErrorToken(TdsCore.java:2816) at net.sourceforge.jtds.jdbc.TdsCore.nextToken(TdsCore.java:2254) at net.sourceforge.jtds.jdbc.TdsCore.getMoreResults(TdsCore.java:631) at net.sourceforge.jtds.jdbc.JtdsStatement.executeSQLQuery(JtdsStatement.java:477) at net.sourceforge.jtds.jdbc.JtdsPreparedStatement.executeQuery(JtdsPreparedStatement.java:777) at tridium.util.MSSqlServer.doesTableExist(MSSqlServer.java:341) at tridium.util.MSSqlServer.checkTableWithKey(MSSqlServer.java:316) at tridium.datax.sql.DxSqlUtil.checkTableWithKey(DxSqlUtil.java:190) at tridium.datax.sql.DxSqlUtil.checkTable(DxSqlUtil.java:173) at tridium.tools.DbAdmin.migrateData(DbAdmin.java:1007) at tridium.tools.DbAdmin.main(DbAdmin.java:198) at tridium.tools.DbAdmin.main(DbAdmin.java:122) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source) at java.lang.reflect.Method.invoke(Unknown Source) at tridium.nre.Nre.mainImpl(Nre.java:663) at tridium.nre.Nre.main(Nre.java:603) Environment Niagara R2 WorkPlace Pro version 529 and higher Windows SQL 2005 Cause The Enterprise Server and SQL 2005 database names do not match. The Enterprise Server and SQL 2005 database names have to be the same when migrating the Cloudscape database to a SQL 2005 database. Resolution Rename either the Enterprise Server station or SQL Server database so that the names are the same. Once the names are the same, the migration should go without issues.

Warning Hazard of Electric Shock: Remove all power from all devices before removing any covers or doors of the system. Disconnect power at the device and at the power source. Issue Need to replace an AVUE, AVUX or AVUM Mark 5 Actuator Product Line Field Devices Environment AVUE5305 AVUE5355 AVUE5304 AVUE5354 AVUX5202 AVUM5601 Cause Need to find a replacement for the obsolete AVUE, AVUX or AVUM Mark 5 actuator, that will allow the valve to be retained. Resolution The AVU* Mark 5 range of actuators can be replaced from the MZ300S range. AVUE5305 replace with MZ300S-24M AVUE5355 replace with MZ300S-24M AVUE5304 replace with MZ300S-24M AVUE5354 replace with MZ300S-24M AVUX5202 replace with MZ300S-24F AVUM5601 replace with MZ300S-230F The AVUE, AVUX, AVUM Mk 5 Datasheet is attached   MZ300S Specification sheet   MZ300S-24M Installation Instructions MZ300S-24F Installation Instructions   MZ300S-230F Installation Instructions

Issue Making a cable / adapter by using the cable guide as a reference can be confusing. Product Line TAC Vista Environment Vista Menta Download Wizard Cause Without knowing to use a Ribbon (Rollover) Cable, or the correct pins of RJ45 and DB9, it can be difficult to build this cable and adaptor. Resolution Note: Pay particular attention to the pins numbers, this view is the inside of the adapter! This is the pinout to be used in conjunction with a "ribbon" type cable. A Ribbon (Rollover) Cable has inverse ends. For example, Pin 1 of one RJ45 will be Pin 8 at the other end, Pin 2 will be 7, Pin 3 will be 6 and etc..                                    Here is a Diagram which highlights the path of TxD RxD and GND from the PC to the Xenta Controller. Use and Ohm meter to check the continuity of connections. If you are having communication problems, please see Verifying Serial Port Communications with loopback test   for further troubleshooting tips.                Alternatively, a cut ethernet cable can be wired to a DB9. DO NOT use an Ethernet Cable with the above adapter. 1. Use a standard 586B RJ45 ethernet cable pictured below.                2. Connect RJ45 jack to a DB9F according to the following diagram.

Issue How to transfer data from TAC Vista to EBO(EcoStruxure Building Operation) as a temporarily solution while a transition between TAC Vista and EBO is done?    Product Line EcoStruxure Building Operation, TAC Vista Environment TAC Vista SmartStruxure Solution EcoStruxure Web Services TAC Vista SmartStruxure Interface 1.5 Cause If EBO need data from TAC Vista during a transition period the TAC Vista SmartStruxure interface can be used.   Resolution Please see the video or follow the instructions below:   On the Vista server(s) install the TAC Vista SmartStruxure Interface first. Refer to TAC Vista to SmartStruxure Interface will not connect when TAC Vista and SmartStruxure are installed on the same machine if there are any issues installing or getting the two programs to communicate when on the same PC. In StruxureWare Workstation, on the Enterprise server object or the Automation server object right click and create new interface, and select the EcoStruxure Web Service interface in Workstation. Click next. In the Server, enter the IP address of Vista server. If it is local, just use localhost. Enter the username and password of Vista Server. Pay attention that only the user in the default System user group can be used. Don't try to create other System group. And all the letters in the password field need to be in capital letters. This is a defect that will be addressed in the next release of TAC Vista to SmartStruxure interface. Please be selective with the port that you are using. If the Vista to SmartStruxure Interface program is on the same PC as the Enterprise server than a different port other than 80 or 443 will have to be used. Please refer to TAC Vista to SmartStruxure Interface will not connect when TAC Vista and SmartStruxure are installed on the same machine if the two softwares need to be on the same machine. Click Create. The next step is to Host TAC Vista objects into SmartStruxure. Refer to How to host TAC Vista objects using Web Services in StruxureWare Building Operation for the guide of how to host Vista objects into SmartStruxure. NOTE: There is a defect for Version 1.0 of TAC Vista to SmartStruxure interface under Non-English operation system. The EcoStruxure Web Services interface will not come online in SmartStruxure. Refer to TAC Vista to SmartStruxure Interface does not connect in non-English Operation System for solution.

Issue When attempting to open the WorkPlace Tech Tool software, a Windows fatal error box is displayed: WptEd has encountered a problem and needs to close. We are sorry for the inconvenience. If you were in the middle of something, the information you were working on might be lost. Please tell Microsoft about this problem. We have created an error report that you can send to help us improve WptEd. We will treat this report as confidential and anonymous. Product Line EcoStruxure Building Operation, TAC IA Series Environment WorkPlace Tech Tool software WorkPlace Tech Editor Cause This problem can occur when you use an unsupported version of Visio, such as Visio 2000, prior to starting WorkPlace Tech Editor. Only Visio 2010 SP1, Visio 2007 SP2, and Visio 2003 SP3 can be used with the WorkPlace Tech Tool or WorkPlace Tech Editor. Resolution In the warning message, click [Don't send]. Close Visio. Open Visio 2010 SP1, Visio 2007 SP2 or Visio 2003 SP3.  This causes Windows to initialize and configure that specific version of Visio. When Visio opens, confirm that the selected version opens.  If the wrong version opens, you may need to repair the installation of the selected version. Close Visio. Restart WorkPlace Tech

Issue How to register a BACnet device as a Foreign Device with ES/AS Product Line EcoStruxure Building Operation Environment ES AS WS BACnet Cause Documentation Resolution Before a device can register with ES/AS, the ES/AS has to be configured to assume the BBMD role by creating the BBMD under the IP Network of the BACnet interface. You can then examine the BDT00001 entry for the IP address and port your foreign devices will use to register. Configure the device to register as a foreign device with the ES/AS, in this example we have configured a bCX4040 using its configuration web page. (Note, in order to configure a bCX as a foreing device you must first disable the BBMD option in the bCX) If the device registration was successful, the device's IP address will appear in the foreign device table (FDT) of the ES/AS    

Issue Need a description of Zigbee error codes Product Line EcoStruxure Building Expert Environment SmartStruxure Lite Multi-Purpose Manager Cause No list of error codes available Resolution Here is a list of all possible error codes Error Code (HEX) Error Code (Decimal) Error Description   -2 Device offline (communication initialization after changing Ext. Network ID in ZVC)   -1 Device not bound 0x00 0 Success. Operation was successful. 0x01 1 Failure. Operation was not successful. 0x02 - 0x7d 2 - 125 Reserved by Ember 0x7e 126 Not authorized. The sender of the command does not have authorization to carry out this command. 0x7f 127 A reserved field/subfield/bit contains a nonzero value. 0x80 128 Malformed command. The command appears to contain the wrong fields or invalid field. 0x81 129 Unsupported cluster command. The specified cluster command is not supported on the device. Command not carried out. 0x82 130 Unsupported general command. The specified general command is not supported on the device. 0x83 131 Unsupported manufacturer cluster command. A manufacturer specific unicast, cluster specific command was received with an unknown manufacturer code, or manufacturer code was recognized but command is not supported. 0x84 132 Unsupported manufacturer general command. A manufacturer specific unicast, ZCL command was received with an unknown manufacturer code, or the manufacturer code was recognized but the command is not supported. 0x85 133 Invalid field. At least one field of the command contains an incorrect value, according to the specification. 0x86 134 Unsupported attribute. The specified attribute does not exist on the device. ( Zigbee Module not fully compatible with Room controller and FW of MPM) 0x87 135 Invalid value. Out of range error, or set to a reserved value. 0x88 136 Read only. Attempt to write a read only attribute. 0x89 137 Insufficient space. An operation failed due to an insufficient amount of free space available. 0x8a 138 Duplicate exists. An attempt to create an entry in a table failed due to a duplicate entry already being present in the table. 0x8b 139 Not found. The requested information could not be found. 0x8c 140 Unreportable attribute. Periodic reports cannot be issued for this attribute. 0x8d 141 Invalid data type. The data type given for an attribute is incorrect. Command not carried out. 0x8e 142 Invalid selector. The selector for an attribute is incorrect. 0x8f 143 Write only. A request has been made to read an attribute that the requester is not authorized to read. No action taken. 0x90 144 Inconsistent startup state. Setting the requested values would put the device in an inconsistent state on startup. No action taken. 0x91 145 Defined out of band. An attempt has been made to write an attribute that is present but is defined using an out-of-band method and not over the air. 0x92 - 0xbf 146 - 191 Reserved by Ember 0xc0 192 Hardware failure. An operation was unsuccessful due to a hardware failure. 0xc1 193 Software failure. An operation was unsuccessful due to a software failure. 0xc2 194 Calibration error. An error occurred during calibration. 0xc3 - 0xff 195 - 255 Reserved by Ember   256 Device offline   257 Device profile does not match selected device widget in Building Expert

Issue After upgrading from EcoStruxure Energy Expert (formerly Power Manager) from version 1.0 to 1.x or newer, the licensing no longer works. Product Line EcoStruxure Building Operation EcoStruxure Energy Expert Environment Energy Expert (formerly Power Manager) License Administrator Power Monitoring Expert Cause There can be some confusion on what licenses are required to run Energy Expert. There are also differences between version 1.0 and 1.x or newer licensing.  Resolution EcoStruxure Energy Expert License In order to use Energy Expert, an Energy Expert license is needed to be purchased before the previous 90-day trail license expires.  The EcoStruxure temporary license (evaluation) is only for EcoStruxure Building Operation software and does not include Energy Expert   It is important to remember that EcoStruxure Building Operation licenses are needed to work along side Energy Expert (e.g. Workstation, Enterprise Server, etc). The EcoStruxure Building Operation licenses need to be activated separately.  How to activate, release and/or transfer a license in EcoStruxure.   Energy Expert Version 2 and 3 Licensing and Upgrading If upgrading from a previous Power Manager 1.x site to Energy Expert 2.x or 3.x a new license(s) will be required. In order to obtain your new license(s), please follow the procedure found in TPA-EBO-19-0001.00 - EcoStruxure Energy Expert v2.0 License Upgrade. (Full support ends 2022 and limited support ends 2024) Energy Expert Part numbers and Licensing The part numbers for version 1.x or newer are listed below. PSWPMNCZZSPEZZ -  Base Energy Expert license PSWDENCZZNPEZZ -  PME license entry range PSWDMNCZZNPEZZ - PME license mid range  PSWSANCZZSPEZZ -  Standard PME. license For a full list of both current date and obsolete part numbers please download the following spreadsheet https://ecoxpert.se.com/pme-digital-power-launch)   Activating a License Full guidance for activation of your licenses can be found on Page 55 of the Energy Expert 3.0 Solution Guide The Energy Expert 3.0 installer and documentation, can also be found here EE 3.0

Issue The following error is generated during the SQL Configuration step for 1.8 Reports Server Product Line EcoStruxure Building Operation Environment WebReports Installer Cause This can happen for various reasons: Possible cause 1 The Microsoft .NET Framework installation is damaged after installing Microsoft SQL Server. Possible cause 2 In one of the steps during SQL installation, we have to configure NT AUTHORITY\SYSTEM. If user fails to change this and move ahead with default user then create database step would fail. Possible cause 3 The operating system is not using English as its selected language. Resolution Solution 1 Quit the WebReports Installer Package Remove/reinstall or repair .NET Framework 4.5 (Available from Microsoft .NET download site or direct download - WebInstaller - OfflineInstaller) Repeat the installation of WebReports Solution 2 Set the SQL server service log on properties to "Local System" (NT AUTHORITY\SYSTEM) Restart the SQL server service Repeat the installation of WebReports Solution 3 Replace the WebReports OS with an English version of Windows. 

Issue Configuration of BACnet Foreign Device Registration Product Line EcoStruxure Building Operation,  Andover Continuum Environment BACnet IP  BBMD Foreign device Cause  Foreign Devices registration can be confusing Resolution When configuring a Foreign Device Registration on a B/IP BACnet Network. The Foreign Device only needs to register with the one BBMD on its B/IP Network Segment. The BBMD that has the Foreign Device registered with it creates a table called FDT (Foreign Device Table) internally which is different from the BDT(Broadcast Distribution Table) that the BBMD uses to communicate with other BBMDs.   Once the FDT confirms the Foreign Device, it is up to that BBMD to distribute BACnet communications to and from the necessary BBMD's in its BDT. and the all Foreign Devices in its FDT.  In this way the Foreign Devices does NOT perform Broadcasts.

Issue During a Vista 5.x.x installation, failure can occur during the SQL installation portion of the install. This solution could encompass many different SQL installation errors; however, one that is known and verified is shown below: Failed to create or configure database on SQL Server! ([17] SQL Server does not exist or access denied.) Here is another common one:   Failed to create or configure database in SQL Server ([1802] CREATE DATABASE failed. Some file names listed could not be created. Check related errors.) If you have previously uninstalled Microsoft SQL Server, data files for the database may still exist in the SQL Server data directory. Remove the files manually and click Retry or click Cancel to abort installation. Product Line TAC Vista Environment TAC Vista Server 5.x.x Cause Uninstalling and reinstalling the software can leave pieces of SQL behind. Even if you try to uninstall everything in Add/Remove Programs, left over portions may cause the TAC Vista installation not to be successfully installed. The Program Files\SQL Server directory is flagged for compression or encryption. Installing Vista version below 5.1.5 on a Windows 7 64bit machine will cause this error. Resolution Please check the Windows Event log for the specific installation error. See Viewing, Saving, Sharing Windows Event Logs for Troubleshooting Purposes for information on viewing the Windows Event Log. Consult Log file of SQL installation when installing Vista Server for information on viewing the SQL Server installation log. If the Event log reveals Error 28001, the sa password must meet SQL Server password policy requirements, please refer to the solution provided in Error 28001 - sa password complexity error when installing TAC Vista 5. If not, then please proceed with the resolution below: If the SQL Server installation log file complains that the Program Files\SQL Server\ directory is flagged for encryption or compression then right click on the directory and select properties. The advanced option exposes the check boxes for compression and encryption. If the folder is flagged for compression the it will be visible in blue instead of black font. Remove the encryption or compression flags and apply then reinstall. If the PC operating system is Windows 7 64-bit, install Vista 5.1.5 or higher. Resolution below will not solve the issue. In most cases this is caused by MSXML 6.0 parser. This software is commonly installed by programs using SQL, and also during the TAC Vista installation. If this can't be removed using Add/Remove Programs, you can download a program from Microsoft that cleans up and removes this software (and others). It is called Windows Installer Cleanup. Link to download: msicuu2.exe. NOTE: Microsoft recently removed this utility from the downloads section of their support site. They have this to say about the utility: While the Windows Installer Cleanup utility resolved some installation problems, it sometimes damaged other components installed on the computer. Because of this, the tool has been removed from the Microsoft Download Center. Use this utility with care at your own risk.   In most cases TAC Vista will install successfully after removing MSXML 6.0 parser. For alternative solutions see SQL Express install fails on MSXML 6 and Error when installing SQL 2005 Express on a machine that had previously had MSDE installed .

Issue Can B-Link repeaters be used with EcoStruxure Building Operation? Product Line EcoStruxure Building Operation Environment EcoStruxure Building Operation site release 1.xxx and higher Cause Need to add repeater(s) for EcoStruxure Building Operation Resolution For communication using RS-485, the versions of B-Link BACnet MS/TP Repeaters repeaters shown below were tested and passed for EcoStruxure Building Operation use. Part Number Description B-LINK-AC BACnet MS/TP Repeater, 120/240VAC B-LINK-AC-OP BACnet MS/TP Repeater, 120/240VAC, open class no enclosure B-LINK-AC-S B-LINK, AC, SMK B-LINK-DC BACnet MS/TP Repeater, 24VDC B-LINK-DC-OP BACnet MS/TP Repeater, 24VDC, open class no enclosure B-LINK-DC-S B-LINK, DC, SMK B-LINK-F-AC B-LINK, AC, FIBER B-LINK-F-AC-S B-LINK, AC, FIBER, SMK B-LINK-F-DC B-LINK, DC, FIBER B-LINK-F-DC-S B-LINK, DC, FIBER, SMK   Note the supported cable diameter in microns: 62.5/125. The first number, 62.5, refers to the diameter of the fiber cable's core. The second number, 125, refers to the diameter of the outside of the fiber cable's cladding. For more information see: BACnet b-Link MS-TP Repeaters - Andover Continuum - Specification Sheet b-Link Series - Andover Continuum - Installation Sheet Additional information about Fiber diameters from The Fiber Optic Association Fiber cabling information for an Infilink i2210 and the B-link-F Series

Issue If an application hangs or crashes, Windows systems are sluggish or have problems, or new software fails to install properly one of the first places to look for information on what may be happening is the Windows Event Log. Product Support personnel may ask to see a copy of the Windows Event Log. Product Line TAC INET, TAC Vista, Andover Continuum, Satchwell MicroNet, Satchwell Sigma, TAC IA Series, Field Devices, EcoStruxure Building Operation, Other, EcoStruxure Building Expert, Access Expert, Security Expert Environment Windows Operating System Cause If an application hangs or crashes, Windows systems are sluggish or have problems, or new software fails to install properly one of the first places to look for information on what may be happening is the Windows Event Log. Resolution   Open the Event viewer by one of the ways below: Start Event Viewer by pressing Windows key + R to open the Run dialog box and type eventvwr. Right-Click on "This PC" and select "Manage" then navigate to Computer Management (Local) > System Tools > Event Viewer. Select the type of logs the need to be exported. Application, Security, and System logs in the Windows Logs and Schneider Electric Security Expert logs under Applications and Services Logs (for Security Expert cases) are required.  For each log, view recent messages then click the "Action" menu and select "Save All Events As". Enter the log name, include the log type (Application, Security, or System) in the log name, and location the click "Save". For non-English Windows, make sure to select English (United States) in "Display information" then click OK. 

Issue The purpose of this verification checklist is to provide documentation to the Project Manager that the Site Engineer has confirmed the Continuum Security configuration. Basic Settings Access Events Reporting Alarm Event Notification and Alarm Enrollments Door Alarms Other Alarms Time Sync Video including Pelco Digital Sentry IP Camera System Administrative Tasks Other Tasks Basic Checklist Access Events Reporting Checklist Alarm Event Notification and Alarm Enrollments Checklist Door Alarm Checklist Other Alarm Checklist Time Sync Checklist Video Checklist Administrative Tasks Checklist Other Tasks Checklist Environment Continuum with Security enabled Pelco Digital Sentry IP Camera System Cause Beneficial checklist for Verification of security site settings. Resolution Please find the attached pdf document which will walk you through the Continuum Security Checklist. The first section provides step by step instructions for novice users. The second section is the actual checklist where each task should be initialed by the Site Engineer, and the whole document signed by the Site Engineer and the Project Manager. To print the Checklist section of this procedure, start printing on page 21 of the attached checklist. Please find the attached pdf document which will guide you through a Pelco Digital Sentry IP Camera System Quick-Setup

Issue Locating the IC3-Modbus documentation Environment Sigma IC3 Modbus Documentation Cause Unable to locate documentation. Resolution To download the IC3-Modbus Gateway.txt file click HERE. To download the IC3 configuration guide click HERE. To download the IC3 data sheet click HERE.

Issue Changes to the Set Space Temperature do not work. Environment DC1100 DC1400 Controller Compensator Optimiser Setpoint Cause The pump overrun is timing down and will not allow the controller to act normally until it is complete. Resolution If the "Set Space Temperature" value is modified, then after the rotary switch is returned to "Auto", the user must wait until the Pump Overrun function has timed out. Where adjustments are generally being made, it is recommended that the Pump Overrun setting is set to 1 minute until  testing has been completed, after which it should be return to its required setting. To change the Pump Overrun setting carry out the following: Turn the rotary switch to "Setup". Select "System Menus" then "Alter Settings", and then enter the password of 0112. Select "Compensator", then "Set-up Menu", and then "Pump Overrun". Note the current value then change it to 1. On completion of the tests return the setting to its correct value. For the DC1100 data sheet, click here. For the DC1400 data sheet, click here.

Issue Since Generation 1 controllers do not have a controller webpage, how can I access the controller configuration to set up the controller or access controller information. Product Line Andover Continuum Environment Hyper Terminal CX9900 CX9940 CX9400 CX9410 CX9200 Cause 1st Generation Controllers do not have an embedded webpage. Resolution Find information about the pin configuration of the direct connection cable in PinOuts for the RS-232 Connection of the older 1st Generation CX controllers. The following document describes how to log into a generation 1 controller via a PC with a terminal emulation application: CX Operators Guide.pdf

Issue Need to perform autosensing on an ethernet port but do not have a cross over cable. Product Line Andover Continuum, EcoStruxure Building Operation, TAC INET, TAC Vista Environment Ethernet connection to an Automation Server Xenta device ACX BCX Auto-Sensing, Auto Sensing direct connect Auto uplink and trade Universal Cable Recognition Cause Need to direct connect with a straight through or normal patch cable from a computer or laptop to the AS, Xenta, BCX, ACX  Resolution Since 1998, the distinction between uplink and normal ports and manual selector switches on older hubs and switches are obsolete. If one or both of two connected devices has the automatic MDI/MDI-X configuration feature there is no need for crossover cables. Now you can plug your laptop right into the Ethernet port of the device with just a regular patch cable. 

Warning Potential for Data Loss: The steps detailed in the resolution of this article may result in a loss of critical data if not performed properly. Before beginning these steps, make sure all important data is backed up in the event of data loss. If you are unsure or unfamiliar with any complex steps detailed in this article, please contact Product Support for assistance. Issue Recovering non-functioning Jace 8000 caused by image corruption Product Line TAC IA Series Environment Jace 8000 Cause Improper management of the files on the Micro SD card of the Jace 8000, power brownouts, and other issues have been known to cause corruption of the installed "Golden Image" of the Jace Resolution Download and review the Product Announcement to determine which image should be used on your Jace based on the software to be installed and the Micro SD card version: PADV-IA-22-0001, JACE 8000 Hardware Changes Soon To Be In Effect Note item 8 in the FAQ for information about the correct image for use in version 4.0 Micro SD card.   Download and select the image and tools for completing the process detailed in the video: I/A Series Niagara JACE 8000 Images and Raw Copy Utility - Installation Software