Issue
The purpose of this verification checklist is to provide documentation to the Project Manager that the Site Engineer has confirmed the Continuum Security configuration.
- Basic Settings
- Access Events Reporting
- Alarm Event Notification and Alarm Enrollments
- Door Alarms
- Other Alarms
- Time Sync
- Video including Pelco Digital Sentry IP Camera System
- Administrative Tasks
- Other Tasks
- Basic Checklist
- Access Events Reporting Checklist
- Alarm Event Notification and Alarm Enrollments Checklist
- Door Alarm Checklist
- Other Alarm Checklist
- Time Sync Checklist
- Video Checklist
- Administrative Tasks Checklist
- Other Tasks Checklist
Environment
Continuum with Security enabled
Pelco Digital Sentry IP Camera System
Cause
Beneficial checklist for Verification of security site settings.
Resolution
Please find the attached pdf document which will walk you through the Continuum Security Checklist.
The first section provides step by step instructions for novice users. The second section is the actual checklist where each task should be initialed by the Site Engineer, and the whole document signed by the Site Engineer and the Project Manager. To print the Checklist section of this procedure, start printing on page 21 of the attached checklist.
Please find the attached pdf document which will guide you through a Pelco Digital Sentry IP Camera System Quick-Setup
