Issue There is no fully detailed explanation of how to install an SSL Certificate from an External Authority (CA) Product Line EcoStruxure Building Operation Environment Building Operation Enterprise Server Building Operation Automation Server Cause When trying to install an SSL certificate from an external CA can fail Resolution Configure a DNS name for the AS/ES (This prevents the certificate from being locked down to a specific IP. I.E. Configure an A record for "AS_Name".com Purchase SSL Cert through a 3rd party, or use your organization's internal CA/ root CA Download and install OpenSSL or can use OpenSSL installed with EBO  Run Command Prompt as an administrator Use command "cd c:\program files\OpenSSL-Win64\bin Use OpenSSL to generate a CSR in order to obtain the certificate from the 3rd party openssl req -new -newkey rsa:2048 -nodes -keyout EcoStruxure.key -out EcoStruxure.csr Follow the prompts to fill out the information for the CSR Supply CSR, other certificate contact information, and a means of validating the request to the 3rd party CA Verify identity with CA (this may not be necessary if you use your company's internal CA/ root CA Receive host and intermediate CA certificates from 3rd party CA Make sure the CRT/CER files are in the C:\Program Files\OpenSSL-Win64\bin directory of Windows Explorer Use OpenSSL to convert the CRT or CER files into PEM files, as PEM is the only format EBO will accept openssl x509 -in certFileName.cer -outform PEM -out convertedCertFileName.pem Use OpenSSL to convert the private key file generated at step 6 from .key to .prv openssl rsa -inform pem -in filename.key -out filename.prv Run WorkStation as administrator In WorkStation, Control Panel > Certificates click on the server you are trying to add the cert to, either an AS or ES. Click on Manage Certificates > Add Existing  Put in a name for the certificate (it can be anything you'd like) Click the ellipsis next to host, intermediate, and private to add the appropriate PEM files and click ok  Select the newly added certificate from the drop-down and save the changes to activate Warm start the server After this process is completed, verify that connection to WebStation via HTTPS shows a secure connection/trusted certificate.

Issue How to activate an embedded license for a SmartX Server using the Device Administrator when the computer with the Device Administrator is not connected to the internet. Product Line EcoStruxure Building Operation Environment Building Operation Automation Server Premium (AS-P) Cause Device Administrator is used to manage licenses on SmartX servers The following features of a SmartX server need licenses: SmartDrivers SNMP Notifications Personal Dashboards TimescaleDB MQTT Resolution Building Operation 2022 Note: The offline entry of the Activation-ID License items is not all visible - ONLY the first 5 are shown.  This makes entering this information impossible. This has been fixed in the Maintenance Release 4.0.2 of the Device Administrator.  After activating the embedded license offline and transferring this license to the servers, a license violation may be still shown.  The license status should update within 24 hours.  Perform a warm start and then a Refresh License Status on the selected servers to force this update.   If an error is seen in the progress status indicating ASEmbeddedAPI internal error during the offline activation, check the following Embedded license activation fails - Communities to correct the corrupted storage.   This video will show how to activate an embedded license for a SmartX Server using the Device Administrator when the computer with the Device Administrator and/or the server is not connected to the internet. IMPORTANT NOTES: You need to be connected to the SpaceLogic (SmartX) Server using IP (select +Add server on Device Administrator).  It cannot be connected via USB. Ensure always to run the Device Administrator with admin privileges. Select "Run as administrator." Should Device Administrator be running on a computer that has internet access, then there is no need to swap between online/offline computers.  The offline activation process can be run from the same Device Administrator with no need to change computers.  The offline workflow is always the same and detailed on the webhelp topic Offline Activation of Licenses Workflow  The video below shows version 3 licenses. In Version 4, there are a few more license features and quantities required to enter.  The following article may assist in entering this information. License Features list for version 3.0 and 4.0 Product names     At the end of the video session, you will be able to: Create a request file using the Device Administrator on an offline (to the Internet) computer. Activate request files from the Device Administrator on a PC connected to the internet. Send response files to the SmartX Server from the offline Device Administrator.

Issue Need for a dual redundancy power supply for the Automation Server. Product Line EBO EcoStruxure Building Operation. Environment Building Operation Automation Server. Warning Hazard of Electric Shock: Remove all power from all devices before removing any covers or doors of the system. Disconnect power at the device and at the power source. Cause Understanding how to create a fail-safe power supply for an Automation Server.  Resolution To provide dual power redundancy to an Automation Server, a possible solution can be to use a Phaseo ABL4_ABL8RED24400. This will allow the connection of two 24V PSU's to be connected to the inputs. Then connect the output of the Phaseo ABL4_ABL8RED24400 to the AS's PS-24V See the attached document and diagram for more information.

Issue When external internet access is not possible an alternative NTP Server is required to allow ES and AS to by time synchronized onsite. Product Line EcoStruxure Building Operation Environment Enterprise Server / Automation Server on closed network Eg Windows 7 Cause AS will not synchronize the time with a local NTP such as Windows 7 (32 or 64 bit) without it first being configured. Even then, increasing Cyber Security features within EBO means that the use of a 3rd Party NTP is becoming a much better option. Resolution Preferred Solution The very best option for the latest versions of EBO would be to investigate. Meinberg NTP which is a third party NTP server that runs on the Win7 or Win10 OS and provides NTP by synchronizing with four or more Internet clocks and is a trusted time source in NTP.  It is not an officially supported PSS tool, but it does fix the issue of the ES/AS not trusting the time.   Windows 7  Config If you still wish to attempt the Windows 7 NTP option first the procedure to setup is as follows:    In the 'Services' window (part of Administrative Tools) Stop the 'Windows Time' service if already running. The 'Startup Type' could be set as Manual or Automatic depending on the user needs. In the Registry Editor following changes to be made under the Key HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\W32Time: ** Config -> AnnounceFlags = 5. ** HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\W32Time\TimeProviders\NtpServer -> Enabled = 1. Start the 'Windows Time' service in the 'Services' window(part of Administrative Tools). Note: NTP uses UDP Port 123 Below is a Wireshark capture using filter udp.port == 123 indicating the “Leap indicator” bits are 11, meaning “clock unsynchronized”. NOTE: The NTP client in the AS may ignore the time sent by the NTP server if the root dispersion is greater than 'X' seconds (unknown at this time). See Automation Servers ignore time sync message sent from Windows NTP server that uses local internal clock for information on how to determine whether this is a problem at the site and how to resolve it. Note: Test Lab results show that once validated and synchronized, the AS asks the time from the NTP about every 17 minutes. Two enhancements have been requested for a future release: Workstation gets an alarm if the NTP is not a valid reply A tick box setting in Workstation so the ES/AS can accept an invalidated reply(time)

Issue HHC-USB-IF replacement cable for I/NET Hardware is no longer available, can we make or get details of how to manufacture this cable.   Product Line TAC INET Environment I/NET Hardware Hand-Held Console  Warning Potential for Damage/Loss: The steps detailed in the resolution of this article may result in a loss or damage of data/hardware if not performed properly. Before beginning these steps, make sure all important data is backed up in the event of data loss. If you are unsure or unfamiliar with any complex steps detailed in this article, please contact your local support for assistance. The self manufacture of this product precludes any warranty or liability to Schneider Electric.    Cause The product is no longer available.   Resolution Details of how to manufacture this cable including components are shown in the HHC-USB-IF-331180rA.pdf.

Issue Licenses required to upgrade SBO/EBO to EBO 2022 v4.0.x Product Line EcoStruxure Building Operation Environment Building Operation Automation Server Premium - Secure boot Building Operation Automation Server Premium Building Operation Automation Server Bundled Building Operation Enterprise Server Cause Clarifying licensing upgrade requirements for EBO 2022 v4.0.x Resolution Example: Upgrading a site SBO 1.x or EBO 2.x to EBO 2022 v4.0.x or later directly. Site has an Enterprise Server (ES) the ES has 7x Automation servers AS-Ps and 2x AS-Bs attached. One AS-P has a Modbus interface, and 1 AS-B has a Modbus interface. Adding 1 additional AS-P classic (non-secure boot), 1x AS-P-S secure boot and 1 AS-B scalable. The SBO 1.x or EBO 2.x licenses need to be upgraded to EBO 3.x first. Upgrade ES licensing from SBO 1.x license to EBO 3.x.  These licenses need to be activated using License Administrator.   1 x SXWSWESUP13010 ES Upgrade from 1.X to 3.0 with 10 or less AS  Note: Upgrading ES from 1.x gives the ability to host the maximum quantity of field devices / controllers at the Enterprise Server (600). Also, when a system is upgraded from 1.x, it will be provided with an unlimited (bounded by the maximums stated in the Architectural Guidelines) client license for connections to the Enterprise Server that has been upgraded.   The following additional licenses are required for each AS-x when upgrading a site from SBO 1.x to EBO 3.x or upgrading a site from EBO 2.x that was originally installed at SBO 1.x and upgraded to EBO 2.x. These are not required if the site was originally installed at EBO 2.0 and upgrading to EBO 3.x. These licenses need to be activated using License Administrator.   7 x SXWSWASUP00001 license will be required one for each AS-P. 2 x SXWSWASUP00001 licenses will be required one for each AS-B.   Note: If the site has more than 24 AS-xs then part number SXWSWASUP00099 provides 999 licenses. EBO 3.2.x architectural guidelines allows a maximum of 250 AS-xs per ES.   Upgrade ES license from EBO 3 to EBO 4 This license needs to be activated using License Administrator.   1 x SXWSWESUP30010 ES Upgrade from 3.X to EBO 2022 or later (i.e. to the current EBO version) with 10 or less AS Upgrade AS-P/B licensing from EBO 3 to EBO 4 or later These licenses need to be activated using Device Administrator.   For each AS-P (non secure boot AS-P and AS-P-NL), one of the following bundles would be required for each AS-P.   SXWSWASPUP30SA Upgrades AS-P-XX from EBO 3.x to EBO 2022 or later AS-P Bundle – Standalone SXWSWASPUP30SD Upgrades AS-P-XX from EBO 3.x to EBO 2022 or later AS-P Bundle – Standard SXWSWASPUP30EN Upgrades AS-P-XX from EBO 3.x to EBO 2022 or later AS-P Bundle - Enhanced SXWSWASPUP30FU Upgrades AS-P-XX from EBO 3.x to EBO 2022 or later AS-P Bundle – Full SXWSWASPUP30BP Full Bulk pack for upgrading AS-P-XX from EBO 3.x to EBO 2022 or later, contains 125 pieces of SXWSWASPUP30FU. For the AS-P with the Modbus interface, an SXWSWX000MBRTU license is not needed as Modbus is grand-fathered for AS-P classics.   Note: Once an AS-P license is upgraded, there is no differentiation between AS-P Secure Boot and AS-P Non-Secure Boot (Classic):   If the “SXWSWASPUP30SD Upgrades an AS-P from EBO 3.x to EBO 2022 or later AS-P Bundle – Standard” license was purchased for an AS-P classic, and later it requires an enhanced or full license.   SXWSWXUP00SDEN ASP Bundle upgrade - Standard to Enhanced SXWSWXUP00SDFU ASP Bundle upgrade - Standard to Full Would need to be purchased.   If the “SXWSWASPUP30EN Upgrades an AS-P from EBO 3.x to EBO 2022 or later AS-P Bundle – Enhanced” license was purchased for an AS-P classic, and later it requires an  full license. SXWSWXUP00ENFU ASP Bundle upgrade - Enhanced to Full Would need to be purchased.   For the AS-Bs (AS-B-24, AS-B-24H, AS-B-36, and AS-B-36H), one of the following bundles would be required for each AS-B. These licenses need to be activated using Device Administrator.   SXWSWASBUP30SD Upgrades AS-B from EBO 3.x to EBO 2022 or later AS-B Bundle – Standard SXWSWASBUP30FU Upgrades AS-B from EBO 3.x to EBO 2022 or later AS-B Bundle - Full A SXWSWX000MBRTU Modbus license is not needed with AS-Bs Note: Once an AS-B license is upgraded, there is no differentiation between AS-B Scalable and AS-B (L) Non-Scalable (Classic): If the “SXWSWASBUP30SD Upgrades AS-B from EBO 3.x to EBO 2022 AS-B Bundle – Standard” license was purchased for an AS-B (L) classic, and later it requires a full license.   SXWSWXBBUPSDFU ASB Bundle upgrade - Standard to Full, would need to be purchased.   To upgrade the AS-B-L (classic) type, the SXWSWASBUP30SD ASB Upgrade – Standard license is all that is required.   For the additional AS-P classic one of the following licenses would be required. SXWSWASPUP30SA Upgrades AS-P-XX from EBO 3.x to EBO 2022 or later AS-P Bundle – Standalone SXWSWASPUP30SD Upgrades AS-P-XX from EBO 3.x to EBO 2022 or later AS-P Bundle – Standard SXWSWASPUP30EN Upgrades AS-P-XX from EBO 3.x to EBO 2022 or later AS-P Bundle - Enhanced SXWSWASPUP30FU Upgrades AS-P-XX from EBO 3.x to EBO 2022 or later AS-P Bundle – Full For the AS-P with the Modbus interface, an SXWSWX000MBRTU license is not needed as Modbus is grand-fathered for AS-P classics.   For the additional AS-P secure boot one of the following licenses would be required. SXWSWXBU0000SA ASP Bundle - Standalone  SXWSWXBU0000SD ASP Bundle – Standard  SXWSWXBU0000EN ASP Bundle – Enhanced  SXWSWXBU0000FU ASP Bundle - Full  For the AS-P secure boot if a Modbus interface is to be used the SXWSWX000MBRTU Modbus license would be required. For the additional AS-B Scalable one of the following licenses would be required. SXWSWXBBU010SD ASB Bundle – Standard SXWSWXBBU050FU ASB Bundle – Full A SXWSWX000MBRTU Modbus license is not needed with AS-B scalable. If an additional AS-B classic was added one of the following licenses would be required. SXWSWASBUP30SD Upgrades AS-B from EBO 3.x to EBO 2022 or later AS-B Bundle – Standard SXWSWASBUP30FU Upgrades AS-B from EBO 3.x to EBO 2022 or later AS-B Bundle - Full A SXWSWX000MBRTU Modbus license is not needed with AS-Bs     Addition: If the site had an Enterprise Central (EC) at EBO 2.0 and was upgrading to EBO 2022 v4.0.x or later, one of the following licenses would be required to upgrade to EBO 3.x first:   SXWSWECUP23005 EC Upgrade with 5 or less ES SXWSWECUP23010 EC Upgrade with 10 or less ES Then one of the following licenses would be require to upgrade from EBO 3.x to EBO 2022 v4.0.x or later:   SXWSWECUP30005 EC Upgrade from 3.x - with 5 or less ES SXWSWECUP30010 EC Upgrade from 3.x - with 10 or less ES   For more information on the bundles, search for 'software bundles" in the  “Part Numbers and Hardware/Software User Matrix – EBO 2024”   For information on software and features that require licenses  

Issue Creating binding templates. Product Line EcoStruxure Building Operation Environment Binding templates for Script and Function block programs. Binding template examples:  Type Binding Template Examples Path Matching Binding Templates and Syntax Path Matching Binding Template Examples  Cause 1 - Output points need to be bound to the Requested Value attribute, but the default name matching template only matches the value attribute. 2 - Binding  a Graphic which contains several controllers which all have the same names in the system tree structure, using a binding template. 3 - Binding Template Types examples Resolution 1 - Output points need to be bound to the Requested Value attribute, but the default name matching template only matches the value attribute. Under the system folder of the AS or ES there is a folder called "Binding Templates". In here you can create custom templates by right clicking and selecting "New", "Binding Template". To create a generic template that will bind both inputs, outputs, values and other object types follow these steps: Press Next and the following screen appears: Select All Types and press Next: Click twice on the Add Rule icon (Green +) then enter the three rules as follows: Press create and the new IO Binding template will be created.  If you have used a common naming convention in your points and within the programs, you will be able to use this template to bind all the points and values to your programs. Drag the AS across to the IO Binding template (as below) and it will match all of the point names and use Requested value attribute for the output points. This example shows 2 IO Binding templates, as one was created at the AS level and another at the ES level. Only 1 is actually required to provide this functionality. You can subsequently edit the binding template and it will show as follows:   2 - Binding  a Graphic which contains several controllers which all have the same names in the system tree structure, using a binding template. It is common for a system to consist of many controllers that have been created from the same import file. This will mean that there are many instances of the same names being used, but this is not an issue until a graphic containing several controllers are to be bound. Create a "Path Matching Binding Template" as shown above and configure as shown in the following screen shot. Notice that the Binding candidate has /Application/ between the "Unit" and "Point" to match the tree structure.        The screen shot below shows the site system tree structure, with part of the graphic binding page. Note that for the binding template to work, the bind names used in the graphic must be unique. eg. L6W1_CHB_006 (Unit) and ReturnAirTemp (Point).     For an Export of this template, click Binding Template Export 2013-08-15 083240.zip. 3 - Binding Template Types examples see the Online Help. An additional resource is the Exchange Community in particular the following Knowledge Reinforcement Session Also check out the SmartStruxure-Binding Templates-Lesson 1-7 Quick-Help video on the Exchange.

Issue What is the default IP address for BCX, ACX57xx, CX9702 & Netcontroller II? Product Line Andover Continuum Environment Controller Netcontroller II (9680) BCX ACX57xx CX9702 Cause Default IP address for BCX, ACX57xx, CX9702 & Netcontroller II Resolution The default for all these controller types is: IP address: 169.254.1.1 Subnet: 255.255.0.0 Gateway: 169.254.0.0

Issue Finding the correct procedure for migrating Infinet controllers from a Continuum controller fieldbus to an AS-P. Product Line Andover Continuum,EcoStruxure Building Operation Environment Continuum Cyberstation Building Operation Automation Server Premium (1.9 onwards) Building Operation Automation Server Bundled (1.9 onwards) Warning Potential for Data Loss: The steps detailed in the resolution of this article may result in a loss of critical data if not performed properly. Before beginning these steps, make sure all important data is backed up in the event of data loss. If you are unsure or unfamiliar with any complex steps detailed in this article, please contact Product Support Services for assistance. Cause The wrong procedure has been followed which is not the approved and tested procedure to be used when migrating Infinet controllers from Continuum to EBO.  Resolution Procedure for Converting / Transitioning the Infinet Bus Prior to migrating the Infinet The RS-485 network cable should be routed in a continuous daisy chain bus configuration. There should not be any stub connections, stars or ring configurations. The bussed cable should pass through each node to be connected with no splits or branches in the cable network. Repeaters can be used to achieve the star, distributed star (backbone with clusters), off of the backbone. For additional information, review the article: EBO Webhelp Cabling Using the conversion tool and other engineering efforts, create the AS-P database for all Infinet devices, Infinet, Interface items, etc. in either a live AS-P or in the PCT. At the site From Continuum CyberStation,  the following must be completed to each Infinet controller that you are moving to an AS-P. Upgrade all Infinet devices that are going to be converted to the latest firmware version.  Firmware upgrading capability will not be available in EBO until a future release. Clear the memory of all Infinet devices involved before relocated to the AS-P com port by editing the controller object and selecting Runtime > Reset. If the conversion was done on the PCT, deploy the AS-P. Verify that the AS-P firmware is 1.9.0.73 or higher. Disconnect Infinet bus from the Continuum controller com port(s). Move the Infinet bus (busses) to the corresponding RS485 port(s) on the AS-P. Confirm that the Infinet devices are all showing online under the AS-P Download the Infinet devices. * Backup all Infinet devices to flash memory.   *  If the Infinet devices share data with other Infinet devices then it may be necessary to repeat this step in order to establish the complete Import/Export table. PLEASE NOTE The above steps are important! If not followed, offline and bus problems can occur. There may be a desire to skip the rest of the controllers, but the steps must be followed The likelihood is high that there will be substantial difficulties in getting the i2 controllers online and in a stable state to accept the download files. All of the Infinet controllers must be reset in Continuum before moving the bus to the AS-P.  The controllers should then be backup up to flash memory to ensure that they do not revert to their Continuum configuration following a cold start. If problems occur that make it necessary to abort the migration process and return the controllers to the Continuum system, all of the Infinet controller must have their memory cleared before re-attaching the bus on the comm port of the original Continuum controller.  For those controllers which have not established communications under the AS-P, this will mean performing a hard reset at the Infinet controller hardware. At no time should the Infinet bus be connected to the both the AS-P and the Continuum controller at the same time as this  confuses the Infinet controllers causes communications issues that will take some time to resolve. Please also see the "Infinet under the hood" community post Continuum Conversion Tool NOTES V3.0.x and v3.1.x Conversion Tools should not be used. The Workaround is to use the 2.0 Conversion Tool then upgrade. (The Conversion tool was fixed by v3.1.2.6000 (CP5)) V3.2.x onwards the Conversion Tool operates correctly v4.0.3 has an issue converting Infinet controllers, 4.01 or 4.02 should be used instead Now fixed in v4.0.3.5005 CP3(Known Issues) v3.x outperform 4.x, 5.x and 6x.(known Issues). The Workaround is to convert the dmp file in CCT 3.x then upgrade the DB to the expected version in PCT or AS-P.

Issue A 3rd party system wants to poll data from EcoStruxure BMS server through Modbus, how to set it up? Product Line EcoStruxure Building Operation Environment Building Operation Automation Server Building Operation Automation Server Premium Building Operation Automation Server Bundled Building Operation Enterprise Server Cause If an EcoStruxure BMS server needs to share data with a 3rd party system through Modbus, the EcoStruxure BMS server can act in one of two roles: Modbus TCP server or Modbus RTU Server (Slave) EBO server acting as RTU slave EBO server acting as Modbus TCP server   Resolution  Create a Modbus interface under the EcoStruxure BMS server and define the Modbus device ID for the EcoStruxure BMS server. Create Modbus points under this Modbus interface and set the register numbers and register type for the points. Create a Modbus Slave network for serial connection, select the COM port and set relative communication parameter. Or create a Modbus TCP Server for TCP connection and can change the default Modbus TCP port if needed (Usually just leave it as default). Use standard Modbus test software like Modscan to scan the points through TCP or serial. Use Function Code 1 or 2 to read Digital Modbus points and Code 3 or 4 for Analog Modbus points. Be sure to match the data length setting in Modscan with the real points number in the EBO server. For instance, if there are only 3 values in EBO Modbus interface, the data length setting must be less than 3 in Modscan. Or it will show error in Modscan. The below video will demonstrate how to configure EcoStruxure BMS server to act as Modbus TCP server or Modbus RTU slave  

Issue How do I setup and configure the database when using External log storage in EBO? Product Line EcoStruxure Building Operation Environment PostgreSQL TimescaleDB pgAdmin Building Operation Workstation Cause When using External log storage in EcoStruxure Building Operation(EBO) PostgreSQL server and TimescaleDB are installed on a computer where the trend log data and events should be stored. The database used for External Log storage needs to be setup and configured correctly. Resolution The EBO External Log Storage Installer tool available on the Community assists with installing and configuring the PostgreSQL server. But if you like to see how it is done manually please watch this video. The following steps are shown in the video: Create the database in the PostgreSQL server Create a user which will be used by EBO when it connects to the database Configure the database for use with EBO Configure EBO to be able to connect to the database  

Issue It is not clear how to replace an existing AS with a new AS-P Product Line EcoStruxure Building Operation Environment Automation Server (AS) Automation Server Premium (AS-P) First detected in version 1.7 Cause Detailed instructions on how to replace an existing AS with a new AS-P are needed Resolution WebHelp references Automation Server Replacement Using Restore Automation Server Replacement Using Restore Workflow Overview Main differences between an AS and an AS-P: In the AS-P, the RS-485 ports have been re-located to the top. The AS-P has 2 Ethernet ports; port 2 can be used as a switch only as of SBO version 1.81. AS-P device USB port format changed to mini USB. Operator Panel port has been removed. Hardware factory reset has been removed. AS-P uses pluggable connectors for field buses. (not shown in picture above) Consider the power consumption. AS-P requires 10 watts, while the Automation Server only required 7 watts. Preparations In preparation for replacing an Automation Server with an AS-P the following considerations must be made: Power consumption Since the AS-P consumes three more watts than the classic Automation Server, the power budget needs to be reviewed to check whether an additional power supply and/or rearrangement of the current configuration is needed, if the configuration includes IO modules. Terminal base The terminal base for the classic Automation Server can be used with the new AS-P after removal of the upper terminal block. Note though that all field buses wiring has to be moved to the pluggable connectors used with the AS-P. RS-485 field bus re-wiring Since the RS-485 ports and connectors have been relocated, the termination at the server of any field bus located on those ports will need re-wiring. Also, the physical specification of the RS-485 port is changed in the AS-P, so review whether the termination resistors needs to be replaced. Refer to Configuration Selection for Generic RS-485 Network Devices AS-P firmware Unlike the classic Automation Server, the AS-P ships from the factory with no firmware installed. Make sure to procure the appropriate Device Administrator firmware to install in the unit. First version that supports the AS-P is 1.7. Note once again that the USB port format in the AS-P is mini USB, so procure the appropriate USB cable. Backup file Make a backup of the classic AS to be replaced, the AS-P will restore from a classic AS backup but this is a one way process, the classic AS will not restore from an AS-P backup file. If the classic AS is running an older version of firmware, it will have to be upgraded first to at least 1.7.2. Power budget review Since the AS-P consumes 10 watts of power versus 7 watts for the classic Automation Server, it is necessary to review the power budget to ensure there is enough power for the AS-P, if the Automation Server being replaced is hosting IO modules. One power supply (PS-24V) can supply 30W. The following table shows power consumption for the different device types Device Power AS-P 10 AS 7 DO-FA-12-H 1.8 DO-FA-12 1.8 DO-FC-8-H 2.2 DO-FC-8 2.2 DI-16 1.6 RTD-DI-16 1.6 AC-4 11.1 UI-16 1.8 AC-2 5.5 AO-8-H 4.9 AO-8 4.9 AO-V-8-H 0.7 AO-V-8 0.7 UI-8-AO-4 3.2 UI-8-AO-4-H 3.2 UI-8-DO-FC-4 1.9 UI-8-DO-FC-4-H 1.9 UI-8/AO-V-4 1.0 UI-8/AO-V-4-H 1.0 In case one or more additional power supplies are needed, refer to the example given in last part of this article.   Note: The following "replacement procedure" applies to SBO 1.7.x, 1.8x, 1.9x, EBO 2.0x and 3.0.x and 3.1.x. The AS-P must be running the same version as the original AS backup. The AS was no longer supported from EBO 3.2.x. If the site needs to take the AS-P to EBO 3.2 or later, the following should be followed at the AS supported version, then once the AS backup has been restored to the AS-P, the AS-P can be upgraded further, following the supported upgrade path, which can be found in the release notes for the specific EBO version.   Replacement procedure The following procedure assumes the classic Automation Server is being replaced with a brand new AS-P from the factory If the Automation Server is hosting IO modules then perform the steps in the 'Power Budget' section below before going to the next step. Perform pre-maintenance procedure per site requirements, i.e. put equipment in hand control mode etc. Pull out the classic Automation Server from the terminal base. The hardware is designed for hot swapping so there is no need to power down the system. Remove the terminal block from the terminal base as indicated above. Insert the AS-P in the terminal base. Connect Device Administrator to AS-P via USB and install a new database on it. You may want to check the 'Set time on device' check box to initialize the time in the AS-P since its current time is most likely at default if this is a brand new unit or a unit that has been powered down for a while. Using Device Administrator set the communication parameters of the AS-P (IP address etc) to match the settings of the classic Automation Server being replaced. Connect Ethernet cable from network switch to Ethernet 1 port on the AS-P. If a hotfix was installed on the Automation Server that is replaced, apply any hotfix needed to match the version of the firmware in the AS-P to the version of the backup from the Automation Server. Since the AS-P should now be able to communicate over IP the application of any HF can be done either over USB or IP. Using WorkStation, log in directly into the AS-P and restore the backup from the classic AS. Insert pluggable connectors for field buses. If there is an Enterprise Server, log into Enterprise Server from WorkStation and verify the newly swapped AS-P is online. Verify IO modules (if any) are online. Verify field devices (if any) are online. Return the system to software control per site requirements. Verify the system is operating correctly then perform a backup of the AS-P. Power supply addition example Consider the following system If we do the math, the power consumption of this system is 29.8 watts. To avoid exceeding the capacity of the existing PS we need to add an additional PS to the configuration before we replace the Automation Server with an AS-P. In order to maximize the use of the capacity of the first PS we will add a new PS at slot #7 and move the UI8AO4 IO module from slot #7 to slot #8.   Steps Disconnect the UI8AO4 IO module making sure it powers down. It is necessary that any IO modules being relocated on the IO bus are powered down so that they 'forget' their current module IDs. *** Logon to the Automation Server, make sure UI8A04 shows offline then edit the module and change its Module ID from 7 to 8. Insert power supply at slot #7 Attach the UI8A04 after the new PS (slot #8), when it powers up it will obtain its new Module ID (8) from the Automation Server. Last, if the module’s name contains the ID (Slot07:UI8AO4) it may be a good idea to rename it using the new ID to avoid confusion. (Slot08:UI8AO4) *** It is absolutely necessary that all the modules that will change IDs be powered down, if there are multiple power supplies in the chain make sure to power down all power supplies that are supplying power to any modules that will change slot #. When removing or inserting IO modules or handling S-Cables, care should be taken not to bend or otherwise damage the pins that connect the module to its IO terminal base, any damage to the pins may cause the module address to shift.   Tip There is a tool on the community (SBO xbk Analyzer) that can be used to automatically calculate the power budget from a backup of the AS/AS-P. Here is the power budget report generated from the tool after addition of second power supply at slot #7 before replacing the classic AS with an AS-P. The total power consumption is 29.8 watts but we have increased the power capacity of the system to 60 watts with the addition of the second power supply.   The instructions above are available as a PDF: Replacing a classic AS with AS-P

Issue Steps to backup within EcoStruxure Building Operation (EBO) Product Line EcoStruxure Building Operation Environment EcoStruxure Building Operation site with AS and/or ES Backup, Automation Server, Enterprise Server, Workstation, .xbk, xbk, backup set, db backup, db_backup Cause Must an AS or ES be stopped in order to do a full backup? Is a raw copy of the database folder from within Windows Explorer sufficient for backing up an ES?  For instructions on how to restore a backup in StruxureWare/EcoStruxure Building Operation, see How to restore a EBO server backup set. Resolution No need to stop AS or ES: EBO freezes the database during backup. Configuration changes are queued until backup completes; historical data is buffered. Do not use raw folder copy: Always use the built-in backup function. Three rules to remember: Restores must use the same software revision. Do not rename the backup set. If renaming is needed, zip the backup and rename the zip file. Default backup schedule: Every Sunday at 1:00 AM. When creating a backup, give the appropriate prefix to the standard name format. See screenshot below. The backup file will be shown as the screenshot below. Should the backup name need to be changed, then either create a new backup, or zip up the backup using the new name. Backup Procedure Enterprise Server (ES) Automation Server (AS) In Workstation, select the Server in the System Tree. Go to Actions → Backup. In Backup Options: Include column: Select servers to include. Backup content: All Data: Historical + configuration databases. Configuration only: Configuration database only. Add a Backup set description (up to 255 characters). Click Backup. Verify that each backup succeeded and click Close. Backup file location: C:\ProgramData\Schneider Electric\StruxureWare\Building Operation 1.X\Enterprise Server\db_backup\LocalBackup or C:\ProgramData\Schneider Electric\EcoStruxure\Building Operation 2.X\Enterprise Server\db_backup\LocalBackup   Backup Files of AS: Log in to AS from Workstation. Navigate to System → Backup and Restore → Backup sets → Local. Right-click the backup file → Save To... (choose folder on HDD).

Issue A repository of objects available somewhere for sharing TGML graphics such as Smart Widgets (Power Objects), Camera, Door, Lighting, Reader, override, etc. Product Line EcoStruxure Building Operation Environment StruxureWare Building Operation site with Smart Widgets. Cause Graphical interface of power object, such as a Power Meter, Power Objects, Camera, Door, Lighting, Reader, override, etc. for viewing in TGML graphics mode. Resolution These objects should appear on the StruxureWare Building Operation Community Site. However, there is an ongoing centralized effort in producing more objects in a uniform way and the developers have not yet seen the devices they developed objects for. One of these developers has made objects for these devices: PM710, PM9, PM800, ION6200, Compact NSX. There are standardized updates in progress for these and also for the PM210. The community is the best place to get these. PSS does not have a repository of these type of objects.  

Issue Users may want to know how to perform the online activation of an embedded license  Product Line EcoStruxure Building Operation Environment Building Operation Automation Server Premium (AS-P) Building Operation Automation Server Bundled (AS-B) Cause From Building Operation 2022, the Automation Server (Classic/Secure boot AS-B or AS-P) and features like Smart Drivers, SNMP notifications, Personalized dashboards, TimescaleDB, MQTT Publish/Subscribe, Modbus, Serial MS/TP, ES Connection, Server I/O, Field Devices, SAML Authentication, Zoning, and BACnet IP require a license. Customers need to know how to activate their embedded licenses to enable these features. Resolution This video will demonstrate how to Find the list of supported features by each activation ID. Activate an embedded license on an Automation Server Verify the embedded license status via the Device Administrator, Workstation, and the Flexnet operation license portal. Notes Check each activation ID's supported features using the part number or license description through the Features and Licensed Products Table.  The Flexnet operation license portal is a public FlexNet Login (flexnetoperations.com) accessible from anywhere with an Internet connection.  The Automation Server and the PC running the Device Administrator must have outbound connectivity to the license activation server over the Internet. Check the resolution section of this article Could not establish contact with License Server using SmartX Server - Communities to verify if the Automation Server has access to the Flexnet license activation server. For troubleshooting, refer to Embedded license activation fails. Web helps:  Assigning Licenses and Activating Licenses Online. An Embedded DEMO license is available for temporary use during project engineering and installation until you know each device's specific licensing needs. Please visit How to activate a demo license on an Automation Server at EBO 2022. If the Automation Server does not have access to the Flexnet license activation server (no Internet connection), you can perform the steps in the following article Offline activation of embedded licenses.  Please take note that starting from Building Operation 2023 version 5.0.3 and higher, Automation Servers are no longer required to be connected to the Internet. The Device Administrator can access the internet and manage communication and license activation for the 'offline' Automation Servers.   A shorter version of the Online Activation of Embedded Licenses for Automation Servers-Digital Job Book (nampss.com). is available on the NAM PSS site. (Note: Registration for access to this site may be required.)  

Issue When trying to activate an embedded license on a SmartX Server using Device Administrator, the activation fails with the following error message: Failure (error) received when reclaiming an embedded license on an Automation Server   "Embedded operation: Activate failed: ASEmbeddedAPI internal error: Capability request could not be created." Product Line EcoStruxure Building Operation Environment Building Operation Automation Server Premium (AS-P) Building Operation Automation Server Bundled (AS-B) Building Operation Automation Server (AS) All of the above v. 3.0 or higher Cause The cause of this problem is that the trusted storage, i.e., the embedded license database on the SmartX server, is corrupt. The embedded licensing framework undertakes internal checking and if it determines there is a consistency problem, it will consider the trusted storage to be corrupt. This means that no operations to the trusted storage, such as activating licenses, will succeed. At the time of writing, it is unclear why the consistency problems happen. In the server log, you may also observe the following error message: 10:08:06: Executing licensing command 10:08:06: Executing embedded operation: Activate ActivationID: ACT-XXXXXXXXXX-XXXXXX-XXXXXXXX 10:08:11: Embedded operation: Activate failed: ASEmbeddedAPI internal error: Capability request could not be created 10:08:11: Licensing command completed 10:08:11: Activating licenses failed (Real Activation ID replaced with ACT-XXXXXXXXXX-XXXXXX-XXXXXXXX)   Although this process is specific to the "Capability request could not be created" error, similar errors can be corrected by following the steps shown in the resolution. Please attempt all steps before contacting support.   Resolution   Building Operation 2022 v4.0.4  and above Upgrading to the above versions will now resolve the trusted storage corruption and inhibit license activation. Building Operation 3.2.X and up to EBO 2022 v4.0.3   Note: Although this process is specific to the "Capability request could not be created" error, similar errors can be corrected by following the below steps. Please attempt all steps before contacting support.    Clear trusted storage within the server Using Device Administrator select the affected server and Open a PuTTY Console An alternative way of connecting to the server is to use WinSCP. Use File protocol SCP and the admin user. When connected, follow the instructions as per the Word Document also attached below Warm or Cold Start the AS-P If failures still occur, attempt the Offline Activation of Licenses Workflow; The key step is that the license is activated offline and then transferred to the server in two different steps, allowing the license activation process to complete successfully.   Warm or Cold Start the AS-P If there are still failures with either of these options, send a support request through your local support center including the errors seen with each activation attempt.     Building Operation version lower than 3.2.X   If the embedded license is a Client license, there is no need to activate the license. Install the EBO Hotfix 3.0.3.2001 (CP1) or later. This will remove the enforcement of SmartX server Clients in the licensing system. See also article Embedded WebStaion client license when logging directly into a SmartX server no longer needed. Other licenses like SmartDrivers, SNMP, and Personal Dashboards may still need to be activated. Contact your local support center to fix this problem.

Issue Firewall issues when trying to reach out to the activation server for a license Product Line EcoStruxure Building Operation, Satchwell Sigma, TAC Vista Environment Building Operation Licensing Firewall Cause If the corporate network has a very restricted firewall policy or rules, the port needed to reach and activate a license may be blocked. Note: The same license server is used for EcoStruxure Building Operation, Satchwell Sigma and TAC Vista software licenses. Resolution Open Port 443 (HTTPS) for the server hosting the license server, and ensure that the routing paths to the Flexnet Licensing server URL's are all fully open. The Licensing Server URL should be opened from the site, and it is:  https://schneider-electric.flexnetoperations.com ocsp.r2m02.amazontrust.com Ocsp.r2m02.amazontrust.com Ocsp.rootca1.amazontrust.com If the site of the old server has issues with non-secure communications or communications forwarding between the previous and the new server, a tool is available to configure EBO to only use the new server. See the Exchange Community article for the download: SBO License Setup Note: From EBO V2.0 only the new license server is used, port 80 is no longer required and HTTP is redirected to HTTPS.

  Issue Fail to login to the selected server when the User name and Password are correct. Product Line EcoStruxure Building Operation Environment Project Configuration Tool 2.0 Cause In the example, the Server is in EBO 3.2.1.630 and the Workstation is 3.2.3.59. The Workstation is at a higher version than the Server but it's not the latest version. PCT loads the incorrect IP(192.168.10.2) in the WS due to the version.     Resolution PCT requires to use of the latest version of WorkStation for all releases (3.2, 4.0, 5.0, 6.0).  For example: EBO 3.2.1.630, 3.2.2.61, 3.2.3.59 and 3.2.4.1009 use WorkStation 3.2.4.4007(CP2) or above. EBO 4.0.1.86, 4.0.2.559, 4.0.3.176, 4.0.4.45 and 4.0.5.7 use WorkStation 4.0.5.3004(CP2) or above.    

Issue SVT Controller will not operate plant under Auto control following Clock replacement. Environment SVT 4201 Optimiser Controller. SVT 4251 Optimiser Controller. Cause Replacement Clock installed in SVT Controller is incompatible due to incorrect Clock specification selection.   Resolution 1. Check SVT Optimiser Controller Specification Number.      Specification Number 588-4-201 = SVT 4201     Specification Number 588-4-251 = SVT 4251   2. Check SVT Clock type.     Analogue or Digital ?   SVT 4201 is Analogue Clock version of SVT Replacement Clock installed should be of Analogue type. Replacement Analogue Clock Specification Number = 561-9-260   SVT 4251 is Digital Clock version of SVT Replacement Clock installed should be of Digital type. Replacement Digital Clock Specification Number = 561-9-261   3.  Replace Clock of incorrect type / specification with Clock of correct type / specification.   Please check the catalog for current equipment

Issue How to perform the activation of an embedded demo license Product Line EcoStruxure Building Operation Environment Building Operation Automation Server Premium (AS-P) Cause The embedded demo License is a temporary license used for demonstration purposes, training, site engineering, when waiting on a permanent license order, or license support. This license file has a .Bin extension and can be downloaded from the EcoStruxure Exchange (ecoxpert.se.com) and is valid for a limited time (3 months). Resolution This video will demonstrate where to download, and how to activate an embedded demo license on an Automation Server using the Device Administrator.