Building Automation Knowledge Base

Issue What are the different values for the Alarm Enable attribute on a Continuum object when viewed in a list view? Product Line Andover Continuum Environment Continuum Alarms All Infinity Controllers Cause The Alarm Enable attribute is a number that represents the binary combination of the 8 possible alarms that can be used on the "Alarm" tab of a Point or a Numeric. Resolution The screenshot shows a numeric that has 2 Alarms enabled, the binary combination of these 2 points would be 3 (Bit 1 + Bit 2). If a third alarm was added and enabled the Alarm Enable Value would change to 7 (1+2+4). If you disable the first alarm leaving just 2 & 3 Enabled the value would be 6 (2+4). The weighting of the 8 bits are: 1 2 4 8 16 32 64 128 When an alarm is not setup it defaults to 255, but if the alarm enables are all de-selected it will be 0. Although Plain English programs cannot write to this attribute you can change the alarm checking under different site conditions or by time of day using the Shunt alarm points 1-4, See Alarm Point Clarification.

Issue How to create a write to file notification that creates a comma separated value (CSV) file. Product Line EcoStruxure Building Operation Environment Building Operation Enterprise Server (ES) Building Operation Automation Server (AS) Cause Write to file notification has options for Excel and text formats, but no option for CSV format. Resolution As the name suggests, Comma-separated values (CSV) is a text file format that uses commas to separate values, and newlines to separate records. A CSV file stores tabular data (numbers and text) in plain text, where each line of the file typically represents one data record. This means that the text format can be selected in in the notification to provide a CSV file.   Building Operation 1.7 and earlier Under file name, use the extension .csv. See screenshot below:   This will produce a .csv file located in your database folder under the Notification folder.   Building Operation 1.8 and later With the introduction of "Variable Triggered Notifications" and "Alarm Triggered Notifications," users can now find the Write to File option within the "Distribution method" in the Triggered Notification Object. Within the Configure Write to File window, users will have the option to save the file with the .csv extension.   Using write to file option to save Text file with .csv extension This will produce a .csv file located in your database folder under the Notification Files folder.  File location in the system tree   For additional information and guidance, refer to the Notifications topic in EBO WebHelp.

Issue Can the old Robertshaw T99 temperature sensors be integrated to SBO? Product Line EcoStruxure Building Operation, TAC IA Series Environment SBO all versions Cause Retrofit job installation Resolution According to the RTD-DI-16 specification sheet, the T99 sensor can be integrated to SBO as follows with some limitations. Configuration Use an RTD-DI-16 module with a 2 or 3 wire RTD resistive input. Select 1000 ohm for the Sensor class property of the RTD input object. Configure the Conversion Settings properties of the RTD input object near the endpoints of the temperature range to be measured using values from the T99 temperature/resistance table. Configure the remaining properties of the RTD input as needed. Limitations Input Range. An RTD-DI-16 input configured for 1000 ohm operation is limited to an input resistance range of 500 to 2200 ohms. This will limit the temperature range that can be measured with a T99 sensor to ~115 deg. F maximum. Linearity Error. Depending on the range of temperatures to be measured and the needs of the application, linearity error may be significant. This can be corrected by using a script or function block program to linearize the signal based on the T99 temperature/resistance table values.

Issue How to tell the difference between a Wireless Window Switch (SED-WIN-P-5045) and a Wireless Door Switch (SED-DOR-P-5045).  They are physically identical. Environment SSL window and door switch Cause Identical physical features Resolution Power cycle the switch (remove the battery for 60 seconds and then insert again) and verify the LED blinking pattern to confirm if it is a window switch or door switch  (2 blinks for window, 3 blinks for door). Or read the identification label on the printed circuit board. See page 3 of the installation guide.

Issue Even though the correct settings are defined in Device Administrator, the Automation Server will appear red indicating that it is not possible to connect to it. Product Line EcoStruxure Building Operation Environment AS Device Administrator Cause Some special characters are not supported in some positions before version 1.6.0. For example, the password admi$n would work in Workstation, but not in Device Administrator. The password admin$ would however work. Furthermore, after 3 login attempts the account will be blocked. Resolution Change the admin password to something simple like "admin" or "password" Reboot the AS, or wait 30 minutes Connect with Device Administrator

Issue Getting an error when trying to launch Run_RunBioAdmin. Unhandled exception has occurred in your application. If you click Continue, the application will ignore and attempt to continue. I you click quit the application will close immediately.  InvalidArgument=Value of '255' is not valid for 'SelectedIndex'.  Parameter name: SelectedIndex. Environment Continuum 1.94 and above. Cause The database got corrupted and needed to be cleared out and restarted. Resolution To resolve this the following steps need to be done: Open up SQL Connect to the db and then Continuumdb Open up the Tables and expand it Look for VStationSysConfig Run a query to delete the rows in it and then restart VStation again.

Issue When opening a TGML graphic in Webstation using Internet Explorer you get a link to download the correct Java version even though Java is installed on the PC used Environment Java Vista Webstation Internet Explorer Cause Webstation has a built-in check to see if Java is installed which does not work in Internet Explorer Resolution Open this path "C:\inetpub\wwwroot\TACVistaWeb519" Version can be different depending what you have installed. Edit the file "TgmlDynamicGraphicsPage.aspx" and remove the lines in picture starting with <script< strong=""> and ending with /script></script<> NOTE: Make a backup of the file in case something happens. and save the file.   Also remember to set the viewer mode to "Dynamic" in TAC Vista Web Settings. The down side of this, is that Webstation will not work on PC's not having Java installed.

Issue It is not possible to bind a point in a Function Block program to the RelinquishDefault property of a BACnet Multistate value in an SE8000 controller. Product Line EcoStruxure Building Operation Environment StruxureWare Building Operation(SBO) 1.6.1 SE-8000 series Room Controller Cause In some circumstances the user may wish to change the value from both the HMI in SE8000 and from a Function block program in SBO, and in this case the RelinquishDefault property must be used. Resolution A possible workaround is to use a LUA script in the SE8000 controller. Idea 1: Write a LUA script that will check if the Priority array (ex. priority 16) value has changed for the list of points that the user wants to modify. If there is an entry in the Priority array, have the LUA script copy that value to Relinquish_default, then relinquish the corresponding priority array entry. Idea 2: There are 6 LUA "scratchpad" BACnet AVs that the user can write too. When the LUA script sees a change in those AVs, it can copy the value to a specific AV's relinquish default. For example, scratchpad AV25 can be used to "shadow" a setpoint. So when AV25 changes, the LUA script will copy the present value of AV25 into the Relinquish_default of whatever the Setpoint's AV is. Example of the LUA script in the SE8000 controller for the above: If value AV25 is bigger than 0, the value of AV25 is written on AV39 Relinquish_default property (priority17) and then AV25 is set to 0. if ME.AV25 > 0 then ME.AV39_Present_Value[17] = (ME.AV25/10); end ME.AV25 = 0 LUA programming guide for SE8000 Room controllers

Issue Correct alarm routing configuration when using both Sigma and StruxureWare Building Operation together following a transition Environment Sigma and StruxureWare Building Operation transition Cause This article is to show the correct configuration when sending alarms to both the Sigma Client and StruxureWare Building Operation following a transition. Resolution In addition to the main Sigma Server add the ES server as a Server (node) on the Sigma network. We recommend using the actual ES server name. In the example below Server 101 is the Sigma Server and Server 102 is the ES   Manually add a dummy Sigma Client for the ES and assign the ES server to the client   Check the settings for the existing Sigma Server   Add both clients to the routesets to enable alarms to be sent to both servers. Download the routeset.rec and att.set files to all outstations

Issue Memory and System Memory in the AS Product Line EcoStruxure Building Operation Environment Building Operation Automation Server Building Operation Automation Server Premium Building Operation Automation Server Bundled Cause What is the definition of the two different memory types shown in the AS? It is not clearly defined in the documentation. In various places, one can see Memory and System Memory, or even add a column to show.  Resolution For the AS, System Memory is the RAM used by the AS Linux OS. The rest of the memory is what is being used for the processes, such as programs, trends, etc. Memory is the amount of memory consumed by the AS (nsp_servers application), system memory is that used by the Linux OS, however there is much debate about how this is calculated and allocated, so too much should not be read into this, it is there primarily for developers.

Issue During Energy Expert installation an error is shown, and the floating license manager is never installed Product Line EcoStruxure Building Operation, Other Environment EcoStruxure Energy Expert (formerly Power Manager) Installation Cause "Error 1722" occurs due to a conflict between the version of Java installed on the PC and the version included in the EE installation package Resolution Uninstall all versions of Java from the PC Install the JavaRuntime manually from the install media "..\setup\SetupSupport\Licensing\JavaRuntime\x86\jre1.7.0_02.msi" Run the complete installation again

Issue SmartStruxure comes preloaded with LonMark's resource files. It is not documented what version of the LonMark Resource Files are build into each version of SmartStruxure. Product Line EcoStruxure Building Operation Environment LonWorks LonMark Cause This is missing from the documentation Resolution SmartStruxure Version Resource Files Version 1.2 13.02 1.3 13.02 1.4 13.12 1.5 14.00 1.6 and later 14.00

Issue WorkStation crashes when opening some TGML graphic pages following a windows update Product Line EcoStruxure Building Operation Environment Windows 7 64 bit SBO v1.6.1.5000 with KB3045171 windows update Cause Windows Security update KB3045171 can cause WorkStation to crash if some fonts have been used within the TGML graphic The example seen was using font "Dotum" Security Update for Windows 7 for x64-based Systems (KB3045171) http://support.microsoft.com/kb/3045171 If this does not resolve your issue see Graphics Editor will not open and causes a font related error. Resolution Microsoft have produced a fix for this problem (KB3065979) see https://support.microsoft.com/en-us/kb/3065979 The PC must be rebooted following this update before the problem is corrected.

Issue Why is "B" shown in the Concurrent license feature list in the License Server Interface (http://localhost:8888) Dashboard?   Product Line EcoStruxure Building Operation Environment Building Operation License Server Cause The Flexera framework requires at least 1 licensed feature to be present when installing a license server for it to start correctly. In this phase there aren't any licensed features so a dummy feature is created. Resolution It can be ignored as it is just a dummy license used for the installation.

Issue After Launching Continuum and entering the user name and password, the logon screen is never dismissed and the logon process never completes. Looking in the Windows Task Manager the ACCVideoRecordingSrvc.exe process is consuming about 25% of CPU and its memory consumption keeps increasing indefinitely. Forcing the ACCVideoRecordingSrvc.exe process to end, allows Continuum to complete the logon and operate normally. Product Line Andover Continuum Environment CyberStation Cause The cause of the problem remains unknown, it is suspected the some custom protection software on the PC is behind the issue. Resolution If the site is NOT using video (no video integration) a workaround is to disable all video functionality at the Workstation as shown below.  

Issue During reloading of controller when physical points are reloaded a Object Type Mismatch error occurs.   Environment b3 Reload Cause Controller database issue. Resolution In this case the problem was resolved by... Deleting the bacnet instance of the controller. Deleting the Infinity instance of the controller in offline mode. Relearning the controller. Rebuilding the controller configuration manually. Finding the bacnet device and sending to database.

Issue WorkPlace Commissioning Tool configured for BACnet IP is unable to discover MNB MS/TP devices connected to an ENC Environment I/A Series G3 Enterprise Network Controller BACnet Integration Cause The ENC station's BACnet routing is not enabled. Resolution In the G3 station, navigate to BacnetNetwork > Bacnet Comm > Network. Check and ensue that 'Routing Enabled' is set to true. 

Issue In the conversion log when upgrading database, the following warning is logged: Invalid value for ProgramID in the object, "~/LonWorks Local FT-10 Interface/Your Network/Controller Name/IO/IO Module Name". The default value has been applied. Product Line EcoStruxure Building Operation Environment AS Device administrator Cause TAC Xenta IO modules of the model 411/421 does not have an application ID populated in the properties. All other IO modules do. The upgrade sees this as missing information. Resolution You can ignore this if the module is a TAC Xenta IO 411/412.

Issue When editing a TGML error A generic error occurred in GDI+ appears Product Line EcoStruxure Building Operation, TAC Vista Environment TAC Vista StruxureWare Building Operation TGML Graphic editor Cause This issue occurs after you install security update 3045171. You experience a crash when you use Windows GDI+ to create text outline-based path objects on a computer that is running Windows 7 Service Pack 1 (SP1) or an earlier version of Windows. Resolution Download the patch below from Microsoft https://support.microsoft.com/en-us/kb/3065979 It has been noted that this patch do not solves all the issues, if you still have issues with other applications uninstall the security update KB3045171.

Issue Logging on to IPM from the web and the default password is not recognized. An error comes up saying Invalid user. Product Line EcoStruxure Building Operation, TAC INET Environment StruxureWare Building Operation, I/Net Cause The default password can be used on the I/Net side but it is not being recognized when logging in from the StruxureWare IPM. Resolution To resolve this issue, the following step needs to be followed: From the original installation folder, find and unzip the Sboscripts.zip from ‘\InetWeb\UpdateScript' folder. Follow the SQL patch delivery process of I/Net. Run 'Sboscripts.exe' on a DOS prompt. Enter the SQL Server Instance name and login credentials for the script to run If the SQL Serve Instance name is not known, open up DBCreate and it would be displayed on the editor, more than likely it would be 'SQLEXPRESS" or blank per the INetDB Configuration. Once the script is complete, launch StruxureWare and enter the default passwords again and it should allow you to successfully log into the program.