Building Automation Knowledge Base

Issue Adding Web.Client to an existing site that has Continuum installed with the CFR compliance option. Environment Continuum with CFR Compliance Cause Can't find any part numbers for Web.Client with CFR compliance or an option to add it. Resolution We do not have an option for Web.Client with CFR. One of the requirements for CFR is the inclusion of operator text when performing certain actions; there is no way to prompt for, or supply, this operator text when using a Web.Client browser client.

Issue The message “Unsupported Unconfirmed service” is displayed in the Standard output Window of an UNC-520. Environment Niagara G3, R2, UNC-520, ENC-520 Cause Some manufactures’ BACnet controllers use unconfirmed service which the UNC/ENC does not handle so they are ignored by the UNC/ENC. Resolution These are nuisance messages which cause no issues. The messages can be ignored.

Issue The Forta M300 is no longer available and needs to be replaced. Environment TAC Forta M300: 8800210000 M310: 8800210010 8800210020 8800210030 Cause old actuator no longer available and is replaced by revised version. Resolution The Forta M300, part no 8800210000, is replaced by Fort M310, part no 8800210030.

Issue If an upgrade fails or a database becomes corrupt the model number or system variables may not match, what is the System Variable count for the various controller types? Environment All Continuum controllers System Variables. Cause For troubleshooting purposes it is often useful to know the number of System variables a controller has. If the numbers differ between on and offline states there is a mismatch or corruption in the database. Resolution The following list shows the default number of System Variable objects each model type should contain: Controller type # Objects bCX1-Inf (9640) 47 bCX1 (4040) 36 bCX1-R (4000) 36 Netcontroller II (9680) 58 or 61 Netcontroller (9900, 9940) 54 CX9400 (Eclipse) 38 CX9200 54 CMX9924 27 CX9702 41 ACX II (5740, 5720) 63 All i2 & b3 Controllers 35 DCX250 21 ACX700 25 ACX780, ACX781 26 i1 Controllers with LCD display support (SCX, LCX810) 19 i1 Controllers without display capability (LCX800, TCX) 18 * Note the Netcontroller II can have 58 or 61 variables depending on firmware version (V2.1x has 61).

Issue Is Microsoft SQL Server 2012 supported in Report Server 1.4?  Environment SmartStruxure Report Server Cause The Report Server 1.4 datasheet mention of SQL Server 2012 is an over sight. Resolution Report Server 1.4 does not support Microsoft SQL Server 2012.  When it may be supported is unknown at the time of this writing.

Issue Application requires a steam valve capable of 7 Bar pressure. Environment VG211 VGS211F V231 Cause application requirement Resolution The VG211 and VGS211F is specified for max 6 Bar ∆Pm. V231 is specified for med 8 Bar ∆Pm (saturated water), but with a max media temp of 120°C.

Issue Default IP address of a SmartStruxure Lite MPM Product Line EcoStruxure Building Expert Environment MPM Cause What is the default IP address of a SmartStruxure MPM? Resolution Out of the box, the default IP is 10.50.80.3 subnet mask 255.0.0.0 This should be changed to suit the project requirement. Log into the controller using the default IP address. Edit the Ethernet setting, changing the IP address, Subnet Mask and Default Gateway. Click save.

Issue At some point the Infinity controller object for a BCX4040 lost all it's owned objects, yet those objects still appear under the BACnet controller. Environment Save to Database BCX4040 Cause Empty controller was sent to database on the Infinity side.    Resolution Must either rebuild the controller from scratch, or restore an older backup that has this object on another PC and export the controllers contents for importing into the existing controller.

Issue Does the operation/accuracy of the 4-20mA Humidity sensor deteriorate over time? Environment SHR100 SHD100 Cause Accuracy deterioration over time? Resolution The documented deterioration/inaccuracy after 5 years is < ± 3% RH. For more details, see the data sheet for each sensor model respectively.

Issue What is SiteStat and where can I find documentation on this product? Is the SiteStat hardware supported by the Schneider Electric repair department? Environment SiteStat Cause SS-SCI controller has failed and a repair or replacement is needed. Resolution While the SiteStat product line is no longer sold or supported by Schneider Electric, a compatible replacement for the SS-SCI controller is the SS-NT-SSA16/CLK which is available on iPortal. https://ecobuilding.schneider-electric.com/search#keyword/SiteStat/tab/documents

Issue Do we have any leakage detection sensor in the Buildings portfolio? Environment Fluid leakage detection sensor Veris LD / SD Cause Request for leakage sensor Resolution No such sensor is available in the Buildings Sensor portfolio. However, Veris might cover this with their Leak detection sensor family. For more details, please see www.veris.com

Issue Needs a 230V actuator to replace existing actuator on customer installation Environment Forta M800 V211T Cause Application requirement Resolution The Forta M800, part no 8800310030 is suitable as 24V actuator for the V211T.

Issue Program going disabled when trying to write to infinity string Environment Continuum 1.9X Windows XP, 2008 server, Windows 7. Cause Simple program tries to do a data transfer like this:   KWH_Count_Str = KWH_January Program disables. Resolution The program should use the keyword:  numtostr   so the program should be like this: KWH_Count_Str = numtostr (KWH_January)

Issue When sharing the domain with the AS under an ES, the domain object appears but includes no Users or User Groups. Environment Domains Users User Groups Permissions Cause Need an efficient way to distribute and administer permissions to all Automation Servers. Resolution When you share a domain in the ES with an Automation Server, the Users and User Group properties apply to the AS However, the Users and User groups will not appear as objects under the domain in the Automation server as they do in the ES. Only the domain object will appears under the AS.  Nevertheless the permissions will be extended to the AS.

Issue Receive data from Trend log (Seven Trends) with incorrect base time hh:12 even though it is set to 00:00.   Environment I/NET Seven  Seven Trends Xenta Server 527 / 527-NPR / 731 Cause When using a Xenta Server as an I/NET NetPlus Router (NPR) and have configured a Trend (Seven Trends) with a sample count of 24 and sample interval of 60 minutes it appears that the time is incorrectly reported to the I/NET Host.  This issue will be rectified in a future release of the Xenta Server firmware.  Resolution As workaround to this issue, the Sample Count value below 24 should be used.   This is issue is not seen when using a Direct Connect configuration 

Issue Ordering a specific controller with the options required seems complicated. What do each of the options mean and how do I build the part number for the controller I want? Environment ACX57xx Netcontroller II Cause The parts list is huge and there does not seem to be detailed information on how to organize each character in the part number to get the controller with the options that you want. Resolution ACX Series Part Numbering Scheme ACX Series part numbering has been structured to make it easier to choose and find the right corresponding part number. All part numbers consist of 13 characters. Configurable options use unique letters so that features cannot be confused. A zero, specifically a "0", is used when a feature is not enabled in the desired configuration. To order an ACX Series controller, follow the scheme described in the PDF here to determine the appropriate part number. (Note: you MUST login to Buildings Download Center to view/download the document)   NetController II Part Numbering Scheme NetController II part numbering has been structured to make it easier to choose and find the right corresponding part number. All part numbers consist of 15 characters. Configurable options use unique letters so that features cannot be confused. A zero, specifically a "0", is used when a feature is not enabled in the desired configuration. All NetController II units are configured to support 32 IOU modules, and will come standard with Ethernet and full use of 128 MB of memory. There is no need to specify this in the part number. To order a NetController II, follow the scheme described in the PDF here to determine the appropriate part number. (Note: you MUST login to Buildings Download Center to view/download the document)

Issue Unable to use "Object" as a keyword in SmartStruxure Script program.  Environment SmartStruxure Script Object Keywords Cause The Object keyword is not supported in SmartStruxure script language because the binding structure cannot accommodate this function. Resolution The Object keyword is not available nor is any compatible function. 

Issue Schneider Electric part number equivalent to Belimo NM24-US Environment Belimo NM24-US MD10B-24 part no 8751015000 Cause Cross reference for replacement of existing actuator. Resolution The Belimo NM24-US seems to be obsolete. The replacement today would be the MD10B-24, part no 8751015000.

Issue Using Vykon Alarm Services no sound is played on alarm popup, sound is enabled in both server and clients. Default sound is enabled and valid (operates in Windows when tested) and same for object level alarm sound. Have entered object level alarming parameters with pipe symbol, sc and tag in alarm text but even the default global sound doesn't work Environment Niagara R2 Vykon Alarm Client Cause The Vykon Alrm Client only supports wav files in standard PCM format, wav files that use compression codecs (e.g. mpeg3, etc.) do not work. Resolution Right click on the sound files and view the properties. The summary tab typically indicates the audio format. (for information on audio formats see http://en.wikipedia.org/wiki/Audio_file_format)  There are free utilities such as Moo0 Audio Converter that can be used to convert audio file formats

Issue Is there any way I can transfer a value between 2 LUA programs without using a BV or AV? Example: A Lua program (PG1) is created to turn on lighting, a variable called LightOn is created but other Lua programs PG2, PG3, PG4 cannot reference the "LightOn" variable. Is there any way a variable from one Lua program can be accessed from another Lua program? Product Line EcoStruxure Building Expert Environment SmartStruxure Lite Lua programming Cause Each PG script has its own dedicated environment, which basically means variable names cannot be shared between scripts. The only things that can be referenced are actual objects (AV, BV, etc.) Resolution An AV or BV object will need to be created within the EcoStruxure Building Expert controller to store the value and make it available for other programs to read. For example a BV1 could be created and read from or written to by multiple Lua programs by referencing ME.BV1 For more information, please reference the EcoStruxure Building Expert Software - User Interface Guide document on the Exchange.