Building Automation Knowledge Base

Issue When starting an I/A Series G3 station on an ENC, the error message "Fox tunneling not licensed" is displayed in the Application Director console output log. Environment I/A Series G3 ENC Cause FOX Tunneling license option not present in station license. Resolution Fox Tunneling is not intended for use through an ENC and therefore cannot be licensed on the ENC. Fox tunneling is configured as part of the Niagara Fox Service on the properties page of the "NiagaraNetwork" driver. 

Issue Cards added to a system are not working and this messages shows up in AMT. Environment All versions of I/Net. Cause There could be a change in the configuration that does not match up with the link causing the message to be generated once the information was sent down to the DPU. Resolution To resolve this issue, follow these steps: 1. Verify that the configuration used is correct as far as a direct connect or TCP/IP. 2. Make necessary changes if not to match configuration. 3. Connect to the system, select Access Doors and verify that it does not have "Link Lost" displayed. 4. Control a door and verify that the correct message is displayed in the Messages Window.

Issue Receive Error: "Unexpected file format" when attempting to open Graphic Page Environment I/NET Seven 2.41 graphic pages Cause When creating, modifying and saving graphics in revision 2.41 and then attempting to open these graphic pages in previous versions of I/NET this error "unexpected file format" is presented. Resolution This issue has been rectified in 2.41A and above. I/NET Software are available for licensed Partners to download on The Exchange Download Center.

Issue .CFG error Cant download Xbuilder project Trendlog.CFG Alarm.CFG Environment Xbuilder Vista Xenta Cause First time a xbuilder project are downloaded / or changes has been made to Alarm and/or Trendlogs the Xenta may need some minutes to start this processes. If the project are downloaded again while this processes are starting up you may get some errors like Alarm.CFG error and/or Trendlog.CFG error Resolution Please wait a few minutes (Depending how many alarm object and/or Trendlog object you have this might take up to 30 min) before you download the project again. Note: Future revisions will give the user a message about why this occurred instead of a plain error.

Issue How to upload the application from a TAC Xenta 280/300/401 device? Environment TAC Xenta 280 TAC Xenta 281 TAC Xenta 282 TAC Xenta 283 TAC Xenta 300 TAC Xenta 301 TAC Xenta 302 TAC Xenta 401 TAC Menta Cause When the application file is generated and compiled, it does no longer contains any information about the layout, or the "yellow boxes". Therefore, it is not possible to extract a Menta file (.MTA) from the device. It is, however, possible to upload the compiled information, and download it to another device. This way, it is possible to replace a faulty device even if you no longer have access the original application. Resolution Always make sure that you have backup of your application files, as it is not possible to upload the graphical information from the device. To upload the complied application information from the device, you have to start TAC Menta, and connect to the actual device via a serial cable. In TAC Menta, select Options, and Simulate to go to simulate mode. Select Online. Select Upload. Select path and filename. The extension will be *.COD (compiled application file) Select Save, and the complied application file will be uploaded. It is not possible to open the *.COD file in edit mode in TAC Menta, you will always have to go to simulate mode before you can open up a stored *.COD file. To change TAC Menta from Tabular mode to normal mode, just press F5. This requires that you have open up an existing application file (*.MTA) or select to make a new application.

Issue Silenced/Ack alarms at one WS still beeps unack at second WS. Going to WS2 and selecting one of the alarms in the Active Alarm Viewer causes the alarms in question to update correctly (silenced/ack) ACCTrace shows WS2 receiving the ACK message from WS1 Environment CyberStation Cause Corrupted subscription Resolution In the EventNotification object remove WS2 from the list of recipients then add it back.

Issue Can Satchsize the valve sizing software be used with Windows 7? Environment Valve sizing Satchsize Cause Customer wishes to use Satchsize on Windows 7. Resolution Satchsize is no longer available and is not supported with Windows 7, but a new program is available. TAC Valve 1.8 UK can be downloaded from the Buildings Business Extranet. Once installed please use the help files installed with the program.

Issue When importing a Xenta server to another it is important that they have the same version but is it also important that the hotfixes(if installed) is the same? Environment Xenta server up to version 5.1.7 Cause In version 5.1.7 and prior versions hotfixes have not changed this part of the code so if the Xentas have the same version it should work. Resolution It is enough if the version of the Xenta servers is the same

Issue R2 UNC station fails to start and displays the following error messages in the Standard output window: Tridium Niagara Station, r2.301.529.v1 [UNC9] tridium.foundation.TRuntimeException E_INVALID_DSTABLE_CODE {165.16} at tridium.foundation.DsTable.codeToSpec (bytecode 58) at tridium.foundation.DsTable.codeToClass (bytecode 1) at tridium.foundation.node.NodeProperty.readExternal (bytecode 70) at tridium.foundation.node.Node.readExternalSchema (bytecode 27) at tridium.foundation.node.Node.readExternal (bytecode 50) at tridium.foundation.node.NodeSet.readExternal (bytecode 132) at tridium.foundation.node.NodeSet.read (bytecode 43) at tridium.foundation.prism.LoaderModule.loadFromSns (bytecode 48) at tridium.foundation.prism.Prism.loadFromSns (bytecode 4) at tridium.foundation.Sys.bootLocalSns (bytecode 11) at tridium.tools.StationMain.bootSns (bytecode 0) at tridium.tools.StationMain.doIt (bytecode 352) at tridium.tools.StationMain.main (bytecode 10) at java.lang.reflect.Method.invoke (Native Method) at tridium.nre.Nre.mainImpl (bytecode 271) at tridium.nre.Nre.main (bytecode 1) *************************************************************** FATAL: Cannot boot station from sns java.lang.IllegalStateException: NodeProperty.readExternal: tridium.foundation.T RuntimeException E_INVALID_DSTABLE_CODE {165.16} at tridium.foundation.node.NodeProperty.readExternal (bytecode 143) at tridium.foundation.node.Node.readExternalSchema (bytecode 27) at tridium.foundation.node.Node.readExternal (bytecode 50) at tridium.foundation.node.NodeSet.readExternal (bytecode 132) at tridium.foundation.node.NodeSet.read (bytecode 43) at tridium.foundation.prism.LoaderModule.loadFromSns (bytecode 48) at tridium.foundation.prism.Prism.loadFromSns (bytecode 4) at tridium.foundation.Sys.bootLocalSns (bytecode 11) at tridium.tools.StationMain.bootSns (bytecode 0) at tridium.tools.StationMain.doIt (bytecode 352) at tridium.tools.StationMain.main (bytecode 10)   Environment Niagara R2, UNC-410, UNC-520 Cause A needed Lon module is not installed in the UNC. Resolution Typical the Standard Output Window error messages usually provide some reference to the missing jar file. In this case, the lonTrane module was not installed in the UNC. Check to see what lon devices are installed in the station, and install all of the needed modules (jars) to the UNC.  

Issue Is it possible to use the VG221F valve in applications with a glycol content up to 50%? Environment VG221F Cause Some valves are not suitable for use in applications with glycol content in media. Resolution The VG221F can be used in applications with deaerated water with glycol-type antifreeze agent (max 50%)

Issue Text undefined error TBD 0x00002001 saving PE program Environment CyberStation Cause This usually happens when objects have been copied from another controller or created from a dmp file. Resolution Try creating the objects manually in the controller and then try saving the program.

Issue Is it possible to change the column size for the alarm window in Webstation? For some alarms it is not possible to see the whole alarm text for an alarm in the alarm window, he need to click on details to see the alarm text.   Environment TAC Vista Webstation 5.1.x Cause The size of the columns is decided when the Webpage is built up and this is nothing that is possible to change in the Websettings. Resolution No this is not possible to change in the Websettings.

Issue When upgrading a TAC Vista server from version 5.0.3 to version 5.1.7 it hangs for hours. Environment TAC Vista 5.0.3 TAC Vista 5.1.7 Cause In the Vista database, two Lon interfaces are using a Loytec NIC-IP. If both of these interfaces are disabled, the upgrade works like it should. Resolution In Vista 5.0.3 open Vista Workstation, open the properties for the Loytec Lon interface Take away the address to the Network interface. Do the same for all Loytec Lon network interfaces. Start the Vista database in Vista 5.1.7.  

Issue When saving a Plain English program, the program disables on the following error. Array index too large or too small. Environment Plain English Manual Log Array Error Cause Program is attempting to store a value in a numerics manual array slot when the array does not exist. Resolution Determine how many array slots the program intends to use when storing values in this numeric. On the Logs page of the numeric editor make sure the size matches the number of array values being used by the program.

Warning Potential for Data Loss: The steps detailed in the resolution of this article may result in a loss of critical data if not performed properly. Before beginning these steps, make sure all important data is backed up in the event of data loss. If you are unsure or unfamiliar with any complex steps detailed in this article, please contact Product Support Services for assistance. Issue Large data base log file causes Continuum to run very slow and/or crash. Environment SU CyberStation MS SQL Express Cause When Continuum starts and attempts to connect to the DB it takes too long due to the size of the log file (14GB in the case covered by this article) Resolution Shrink the database. Go to http://technet.microsoft.com/en-us/library/ms190757.aspx for steps from Microsoft to shrink the database files.

Issue User must not have access to change group access nor individual access. Environment All versions of I/Net software and OS. Cause If there are multiple Tenants in a building using the same software but the only changes that a user can make are those that they have access too and the others should be left alone. Resolution In order to resolve this, the following steps need to be followed: 1. Go to Edit/Host Computer/Passwords, select the user who the limitations would be set on. 2. Select Modify and on the bottom row there is a Tenant Button, it opens a Host Passwords - Tenants Editor. 3. Select a Tenant and verify that they have either Full or Limited Access. 4. If it is going to be limited, highlight and click on the Limited box, this brings up the Host Passwords - Groups Editor. 5. Select the box for Read Only access for which ever groups that access will be limited for and click on the OK buttons to close out. 6. Logoff then logon again as that user and verify that the limitations set about has been incorporated.

Issue Once a backup to flash is successfully performed, will the restore be successful if the acc net id changes? Environment bCX9640 CX9680 ACX5740 ACX5720 Cause System design Resolution Upon attempting to restore a backup of its DB from flash, the controller checks its acc net id against what is in the backup, if a mismatch is found the restore operation is aborted. The error log will error 0x000014fb in the error code column and 0x1442000c in the Data1 column.

Issue Is it possible to speed up the refresh rate of values in a TGML graphic? Environment Vista 5.1.X Cause A customer requires the values to be updated as often as possible. Resolution There is no setting to change the refresh rate in TGML but there are a number of things that can be done to create an efficient graphic. In Vista 5.1.7 and newer: On the view menu, there is an item called 'Statistics'. When testing the graphic it possible to see how efficient the graphic is. Items such as a script on document load are very costly, for example. There is a new property for binding called 'DynamicUpdates'. This can be used to activate a binding later instead of when the graphic is loaded. This can be useful if not all object are visible when the graphic is loaded. Use scripts only when absolutely necessary.  

Issue Since the V354 is obsolete, a replacement valve is requested. Environment V354 part no 7315425000 Spare stuffing box part no 0804629005 Cause Replacing obsolete valve  Resolution No replacement valve is available. Pipe work is required due to port configuration. A spare stuffing box, part no 0804629005, is available for ordering.

Issue Supported Oracle database version for I/A Series R2 Environment I/A Series R2 Oracle database driver (IA-ORCL-DBS) Cause A customer wants to use an Oracle database for I/A Series R2 instead of the default Cloudscape database. They need to know the Oracle database versions that has been tested with the driver. Resolution The I/A Series R2 Oracle database driver is compatible with Oracle database version 9i and has also been tested with Oracle version 11g.