Issue What is Integrated Dial? Environment I/NET site Cause What is Integrated Dial? Resolution Integrated Dial is another I/NET feature that enables communication from a single workstation to controller or host LANs through external asynchronous modems. Communication provided in this configuration is one-way to initiate all calls from the host workstation. No automatic dialing functions are provided for alarms or messaging

Issue What situations may require Auto Dial / Auto Answer (ADAA)? Environment I/NET site Cause What situations may require Auto Dial / Auto Answer (ADAA)? Resolution This application is used when point alarms, messages, transactions and other user-define conditions require immediate attention. This application is also used when automatic collection of data is required. Docutrend and Access Control reports are examples of data collection.

Issue What is a 7810 Tap? Environment I/NET Site Cause What is a 7810 Tap? Resolution The 7810 Tap is a special purpose Tap allowing a printer to connect directly to a controller LAN without using a workstation. This is also referred to as a Printer Tap.

Issue Tap does not auto dial out when an alarm occurs Environment I/NET 7801 Tap Cause The phone number(s) are not defined by the host software  The wrong message priority is defined The message masks do not match Resolution Verify Phone numbers Ensure Alarms are set to Priority or Critical Verify Message Masking

Issue Site plans to install more than 64 remote ADAA (asynchronous) sites to communicate to a Embedded 4X host. What are some of the tasks? Environment I/NET site Cause Site plans to install more than 64 remote ADAA (asynchronous) sites to communicate to a Embedded 4X host. What are some of the tasks? Resolution Plan! Consider which points are critical, then consider which sites are most critical (Do you really need every Message or Transaction to dial the Host immediately?) At the Host, build the Configuration Profile with the link addresses of the network Start I/NET. Set up your Network Configuration (If you are doing Docutrend, set this too!) Give each Remote Site a Unique Name and Site Number (use the INET Help Screens!) (Please, don't leave each site at link 0.) Set up each Site's Tap editor: When to Dial Who to Dial? What will cause a Dial? Link? (Remember, set it for what is needed and read the Help Screens) Save the Site Tap configuration Do frequent backups of your Host's files (This includes NETCON and SITEXXXX.SAVs)

Issue What type of processor is in the 7716? Environment I/NET Site Cause What type of processor is in the 7716? Resolution The 7716 controller is based upon the 486 microprocessor.

Issue How many addressable points can the 7716 supervise or control? Environment I/NET site Cause How many addressable points can the 7716 supervise or control? Resolution The 7716 can supervise or control 200 points

Issue What is the usual Controller LAN speed? Environment I/NET Controller LAN Cause The baud rate for all controllers on the LAN must be set to the same. The default or typical LAN speed is usually sufficient for most installations. Resolution The controller LAN speed is usually 19200 baud.

Issue On the 7716, what is the baud rate of the Hand Held Console (HHC) P1? Environment I/NET site Cause On the 7716, what is the baud rate of the Hand Held Console (HHC) P1? Resolution The baud rate is 1200 on P1.

Issue Which of the IC chips on the 7716 holds firmware information? Environment I/NET site Cause Which of the IC chips on the 7716 holds firmware information? Resolution U4 holds the firmware information.

Issue How many relay outputs are provided on the mother board of the 7716? Environment I/NET site Cause How many relay outputs are provided on the mother board of the 7716? Resolution There are eight outputs. Each of the eight relays have a set of Normally Closed (N.C.) and Normally Open (N.O.) Dry contacts.

Issue How will I know if an output relay on the 7716 is energized? Environment I/NET site Cause How to know if an output relay on the 7716 is energized? Resolution An LED (Light Emitting Diode) indicator adjacent to each output relay will illuminate when the relay is energized.

Issue If the 7716 is taken off the LAN what status light indicates LAN Reconfiguration? Environment I/NET Site Cause If the 7716 is taken off the LAN what status light indicates LAN Reconfiguration? Resolution Assuming the unit has not lost power, LED #7. It is Labeled "RECON"

Issue LED number 8 is always illuminated or in alarm state. Environment I/NET Controller Cause It means one or more points are, or were in alarm. Resolution This can be reset by the HHC. If the all points have return to normal, press ALARM ACK on HHC. Press ALARM SUMRY

Issue How do I set the emulated Tap Baud rate in a PCU? Environment I/NET Site Cause How do I set the emulated Tap Baud rate in a PCU? Resolution Using the HHC, press [Code], 91 [Enter] Press [Inc] or [Dec] to toggle PC port baud rates (usually 9600)

Issue How do I set the controller LAN baud rate in a PCU? Environment I/NET Site Cause How do I set the controller LAN baud rate in a PCU? Resolution Using the HHC: Press [Code], 6, press [Enter] Press [Inc] or [Dec] to toggle between 9600 and 19.2KBPS (usually 19200) Press [Enter] to accept your choice

Issue Can I put more than eight, 0 to 20 milliamp sensors on the 7716? Environment I/NET site Cause Can I put more than eight, 0 to 20 milliamp sensors on the 7716? Resolution For more than eight, you need to use a external power supply.

Issue What are the ratings for the output relay contacts on the 7716? Environment I/NET site Cause What are the ratings for the output relay contacts on the 7716? Resolution ? Form-C (SPDT) ? 24V AC/DC at 0.5 amps ? Operating Modes are: ? Latched ? Momentary ? PWM

Issue Do 7716 inputs have any protection against power spikes? Environment 7716 Cause Protection against power spikes ensure longevity in the controller. Resolution Yes. All inputs on the base card are equipped with transient suppression components.

Issue How do you get the system information of a Xenta Server from a web browser? Environment Xenta Server Xenta 511, 527, 701, 711, 721, 731, 913 Cause View the most up to date system information for the firmware version loaded into a Xenta Server. Resolution Getting system information using a web browser: Menu Utilities-System Information Displays all system information such as software versions etc. Use cut/paste to save information. Menu Utilities-Error-Error-System Error Log Displays system information and all error messages in the system error log. Use cut/paste to save information.