APC UPS Data Center & Enterprise Solutions Forum
Schneider Electric support forum for our Data Center and Business Power UPS, UPS Accessories, Software, Services, and associated commercial products designed to share knowledge, installation, and configuration.
Invite a Co-worker
Send a co-worker an invite to the Exchange portal.Just enter their email address and we’ll connect them to register. After joining, they will belong to the same company.
Send Invite Cancel
Label: "smart-ups & symmetra lx | rm"
View in: "APC UPS Data Center & Enterprise Solutions Forum" | Community
4620 Posts | First Used: 2021-06-27
Solved
This was originally posted on APC forums on 2/28/2008Hello,
I have a Symmetra RM that has the Web/SNMP Management SmartSlot Card (AP9606) installed. I can communicate with it VIA Telnet, but not HTTP o...
This question was originally posted by Mukhtar on APC forums on 8/24/2015Hi
I am facing issue in newly installed UPS SRT6000. It is showing ''Bypass not in range ; distorted wave form'' at every swithc...
Solved
This was originally posted on APC forums on 5/29/2015We had a problem yesterday with our Smart-UPS RT10000 RM XL UPS - the output power turned off and then on 3 seconds later - and I am struggling to f...
Solved
This was originally posted on APC forums on 12/15/2015I have two Smart-UPS RT 10000 XL's with transfer switches. I am not a power or UPS expert. The issue I have is that whenever there is a surge the u...
Solved
This was originally posted on APC forums on 12/9/2015So of all of a sudden today a bunch of my workstations rebooted and a tech walked in to find this. I know it has faulted but I really have no other ...
Solved
This was originally posted on APC forums on 12/3/2015Hello,
We have Smart-UPS VT 40 kVA w/4 Batt Mod Exp to 4, int Maint Bypass, Parallel Capable SUVTP40KH4B4S, PS0813240713, Firmware Revision: 912.040...
Solved
This was originally posted on APC forums on 5/23/2016Hi,
I've got a SURT8000XLI with 3 additional battery bays, I have set the external battery value to 2 with only 1 external battery bay connected.
I ...
This was originally posted on APC forums on 5/9/2016I experienced a power failure over the weekend and I am trying to decipher what looks to me, the UPS shutdown output power 1 minute after power was r...
This question was originally posted by Edson on APC forums on 12/23/2016Today my UPS SMART 5000 is Blinkind on and off on the LCD Screen, the buttons are blinking white and red and there is a long beep...
Solved
This was originally posted on APC forums on 2/27/2020Hi all!
We have Smart-UPS SRT 8000 (SRT8KRMXLI)
And we have starts recieved an messages from our ups:
1.Code : 0x0210 -Informational - UPS: An input...
Solved
This was originally posted on APC forums on 1/7/2008I have a Symmetra UPS that had an older version of the network management card firmware loaded on it. I installed the latest version and now everythi...
Subscribing is a smart move!
You can subscribe to this forum after you log in or create your free account.
Create your free account or log in to subscribe to the forum - and gain access to more than 10,000+ support articles along with insights from experts and peers.