APC UPS Data Center & Enterprise Solutions Forum
Schneider Electric support forum for our Data Center and Business Power UPS, UPS Accessories, Software, Services, and associated commercial products designed to share knowledge, installation, and configuration.
Invite a Co-worker
Send a co-worker an invite to the Exchange portal.Just enter their email address and we’ll connect them to register. After joining, they will belong to the same company.
Send Invite Cancel
Label: "home & office - ups & software"
View in: "APC UPS Data Center & Enterprise Solutions Forum" | Community
12 Posts | First Used: 2021-09-20
I have a number of APC UPS's in use. Every so often when logging in via a web browser I get "Maximum connection reached" error:Normally the solution is to login via telnet and delete the open sessions ...
Hi,Is there any protocol info for theSMC1000IC?My company is thinking of buying one of these but we need to know if we can send commands via USB to this UPS.Many thanks,Viktor
Seeing that there was a new Wizard released for security vulnerabilities I decided to try and update my SMT1500 UPSs firmware.I started the Firmware Update Wizard and it said the UPS could be updated. ...
Hi;I just got a brand new SMT1500C and it seems to be showing some strange behavior.I already had an SMT1500 and the charging behavior of the SMT1500C seems very different (and seemingly wrong).I wante...
Hi, we're occasionally getting the following error on the controller of a Smart-UPS On-Line, model SRT3000XLI: "Output Overload. Backup Not Available". Underneath the message where it shows the operati...
Hi,We attempted to update both our NMC2 cards to the latest firmware. This is what was used:https://download.schneider-electric.com/files?p_Doc_Ref=APC_SUMX_694_ENp_enDocType=Firmwarep_File_Name=apc_hw...
I have placed a new battery pack in the UPS. But whatever I do I do not get the UPS to re-calibrate the runtime.1. Via the comm port i have several times tried "a Runtime Calibration" with a steady 35%...
I have a set of 4 UPSs - 2 x SmartUPS 3000 and 2 x SmartUPS 5000. Each has a network management card. They also have extended runtime battery packs so we usually don't have to power down equipment in a...
Since upgrading Powerchute to10.0.2.301 I've got a variety of servers now deluging me with communication lost emails.All UPS's are fine, status is a green tick, diagnostics are fine.What's been broken ...
Not having much luck here as my first post didn't get any replies.I have had real problems getting firmware downloads because the Filter is sub optimal. Using manual method (ftp) I have been able to up...
My first post here and quick introduction to our business profile.Small private use has grown over time with business now running modest network to support a hospitality business with accommodation, re...
Subscribing is a smart move!
You can subscribe to this forum after you log in or create your free account.
Create your free account or log in to subscribe to the forum - and gain access to more than 10,000+ support articles along with insights from experts and peers.