APC UPS Data Center & Enterprise Solutions Forum
Schneider Electric support forum for our Data Center and Business Power UPS, UPS Accessories, Software, Services, and associated commercial products designed to share knowledge, installation, and configuration.
Invite a Co-worker
Send a co-worker an invite to the Exchange portal.Just enter their email address and we’ll connect them to register. After joining, they will belong to the same company.
Send Invite Cancel
Label: "business power software & nmc"
View in: "APC UPS Data Center & Enterprise Solutions Forum" | Community
17 Posts | First Used: 2021-07-09
Solved
Hi,I have just installed PCNS 4.4.3 Virtual Appliance on a VMWare ESXi 6.0 host. I configured the initial settings via the console and restarted. I can ping the PCNS VA IP address but cannot connect to...
Hello,I have a new APC SRT10KRMXLI with a AP9640 NMC3 Card.The factory version was : v1.3.3.1apc>aboutE000: SuccessHardware Factory---------------Model Number: 0N-1557Serial Number: 5A2205T54882Hard...
NMC AP9630 in SMX1500RM2UNCQ. Took in as trade, accessed briefly via https but with protest (Firefox), was booted from web Ui while changing name, contact, etc. from previous owner. Now cannot access w...
Solved
I have an SRT5KRMXLI (APC Smart-UPS On-Line) that the firmware update failed on and now has no web interface. The forum post I followed (which I've now lost) said that the 704 updater was the correct o...
I have an APC AP 8659 PDU with an apparently corrupted rpdug2 application on it (the app status is A-). The bootmon and AOS look to be good based on the status when I ssh into the unit. The Firmware ve...
Hello,i have a very strange problem. I have tried to run a command file for shutting down the netapp but as you can see in the image the folder i use is not accepted. Everything seems ok but i don't kn...
I have my Power Group outlets - power off delay set to 480 seconds. I have a question:- Is there a way to cancel this shut down if the AC power is restored?Thanks!
Hi,we have a SRT 3000 to power our two-node HA-Cluster.My idea of shutdown is:Power gone - wait 10 minutes - start to shutdown the cluster - wait 15 minutes (shutdown of 20 virtual machines may last a ...
Solved
Both PowerChute Business Edition and PowerChute Network Shutdown use Java.Are the existing versions vulnerable?Waited for word on Friday, Saturday, and Sunday - crickets.When is APC by Schneider Electr...
I have set up a AP9641 network management card on my UPS and when I browse to its fqdn, it converts it to IP address and connects that way, So instead of the browser showing "https:\\myups.mydomain.com...
Hi, anyone please suggest!I just install Powerchute BE 10 and connect with my APC ups (BackUPS 1400U).When I checked on status, I found that display status is incorrect (As in attached).VAC = 23.0 , it...
Subscribing is a smart move!
You can subscribe to this forum after you log in or create your free account.
Create your free account or log in to subscribe to the forum - and gain access to more than 10,000+ support articles along with insights from experts and peers.