APC UPS Data Center & Enterprise Solutions Forum
Schneider Electric support forum for our Data Center and Business Power UPS, UPS Accessories, Software, Services, and associated commercial products designed to share knowledge, installation, and configuration.
Invite a Co-worker
Send a co-worker an invite to the Exchange portal.Just enter their email address and we’ll connect them to register. After joining, they will belong to the same company.
Send Invite Cancel
Label: "datacenter racks & cooling"
View in: "APC UPS Data Center & Enterprise Solutions Forum" | Community
17 Posts | First Used: 2021-07-27
Hello dears,An APC in row cooling unit (ACRP 102) was showing up some alarms as flows,1- Compressor drive fault2- High suction pressure3- relay output abnormalAnd we tried to troubleshoot this problem ...
Hi every oneI visited a site with 15 APC InRow cooling systems installed in 3 HACS. My question is the mode of operation and behavioral logic in the group of cooling systems. How does heating of a remo...
Solved
Hello,I have APC 7921 PDU,and I'd like to control power from remote, for example I need ssh to PDU and running command to On/Off outlet, but now when I telnet/ssh to PDU, only have control console and ...
Hello,We haveAP8653 which had connectivity issues.In log we get:Rack PDU 1: NMC CAN bus off.Rack PDU 1: NMC CAN bus off cleared.Rack PDU 1: Component communications lost with Outlet Board 3 Meter. Plea...
Hello world,I am trying to understand the control mechanism of InRows operating in Inrow environment (open common cold aisle). Maybe one of you can help me?First, let's begin with InRows programmed fo...
I have multiple errors all relating to component communications with the device. The only information that I have been able to locate in the forum says is "Please verify that the terminator in inserted...
I installed PowerChute(10.x) on the server core. It found the UPS and the Agent service runs fine. Now I try to (remotely) connect to the agent using a web browserhttps://:6547, but to no avail. Doesn'...
okay, not sure where to start. i followed the setup guide by Schneider Electric on YouTube, but still have issues, even after reinstalling twice.i cannot change the Output Voltage in UPS Settings from ...
Are there any decently priced options for me if i wanted to rent a 1u space at any particular data center? I really just want to be able to access my server without my kids messing with it/wife unplugg...
Hi Community,I upgraded the firmware on aAP7953 PDU using "apc_hw02_aos390_rpdu374.exe" that I found on se.com. The app said the upgrade completed successfully but I was getting kicked out of the web i...
I have 9 ACRP 501 in-row coolers. One just set a DCE critical alarm stating the DDF failed: "Device status may be inaccurate because an attempt to transfer a device definition file (DDF) failed." The u...
Subscribing is a smart move!
You can subscribe to this forum after you log in or create your free account.
Create your free account or log in to subscribe to the forum - and gain access to more than 10,000+ support articles along with insights from experts and peers.