APC UPS Data Center & Enterprise Solutions Forum
Schneider Electric support forum for our Data Center and Business Power UPS, UPS Accessories, Software, Services, and associated commercial products designed to share knowledge, installation, and configuration.
Invite a Co-worker
Send a co-worker an invite to the Exchange portal.Just enter their email address and we’ll connect them to register. After joining, they will belong to the same company.
Send Invite Cancel
Label: "data center & facility 3 phase ups"
View in: "APC UPS Data Center & Enterprise Solutions Forum" | Community
592 Posts | First Used: 2021-06-26
Setup:Redundant Galaxy VS UPS (2 units).Workstations and servers totaling to more than 50 units.I have tried to follow the application note (https://download.schneider-electric.com/files?p_enDocType=Ap...
Hi all,My first post in this forum..I am an Electrical engineer working on a hospital project,We are in process of procurement of Modular UPS for one of our projects. Can someone guide (better if from ...
I have noticed several times when our UPS reported a battery module failure via its email alerts ("UPS: The internal battery temperature exceeds the critical threshold.", that it's not just one battery...
My PX 80 has 2-year-old 7.2 AH batteries, and some of them are starting to fail a little early. They are all the same model number, but I've noticed that there is some variation in the markings indicat...
Solved
We often see this fault:Symmetra 80K:APC01at Datacenter1 Critical Alarm PresentSystem ID Card RemovedWhy do System ID cards exist?What information is stored on them?Can they be ejected and replaced wit...
Solved
This was originally posted on APC forums on 10/15/2013It is stated that Modbus/JBus Card (Model 66061) installed on MGE Epsilon STS installed. This card was configured with values supplied by BMS contr...
Solved
This was originally posted on APC forums on 10/31/2013Hi,It is stated that our maintenance contract vendor has recieved power modules from APC for our 02Nos Symmetra PX500 UPS. It is requested that as ...
This question was originally posted by Francisco on APC forums on 9/7/2016Hi, we have a Symmetra PX 20 (all in one). Last night, the city energy went off and and the UPS didn't went to battery power, a...
Solved
This was originally posted on APC forums on 12/8/2009I've posted a couple questions, but I'm still having big time issues and I'm going to try and throw this all in one thread and hopefully get it figu...
Solved
This question was originally posted by Christian on APC forums on 2/24/2012We've recently got our Smart-UPS RT 20000 RM XL hard-wired by our facility management. At first we had error messages that the...
Solved
This was originally posted on APC forums on 9/5/2011Hi,
We have installed 2 units of SUVTP30KH4B4S. We also ordered the SUVTOPT009S Parallel Communication Kit SUVTOPT010 Parallel Maintenance Bypass Ki...
Subscribing is a smart move!
You can subscribe to this forum after you log in or create your free account.
Create your free account or log in to subscribe to the forum - and gain access to more than 10,000+ support articles along with insights from experts and peers.