APC UPS Data Center & Enterprise Solutions Forum
Schneider, APC support forum to share knowledge about installation and configuration for Data Center and Business Power UPSs, Accessories, Software, Services.
Invite a Co-worker
Send a co-worker an invite to the Exchange portal.Just enter their email address and we?ll connect them to register. After joining, they will belong to the same company.
Send Invite Cancel
Important Announcement: Protecting our Community from Spam Events
Dear Members,
We would like to bring to your attention recent spam events that have occurred within our community. We understand the inconvenience and frustration caused by these incidents, and we want to assure you that we are taking immediate action to resolve this issue and further fortify our community against spam posts.
Our dedicated team is actively investigating each reported instance of spam and implementing robust measures to mitigate the impact. We deeply apologize for any disruption or inconvenience caused by these incidents. Report Spam Guideline
Should you have any questions, do not hesitate to reach out to our support team. We are here to assist you and ensure your experience remains positive.
Thank you,
Schneider Electric Community Team
There are (2) responses to your posting. Go to response
Thanks to Reddit and r/sysadmin, "today I learned" PCNS v5.0 is available. Here's what the datasheet has to say:
PCNS v5.0
What’s changed as of May 1, 2023
Customers with PowerChute v5.0 will require ...
2 x Smart-UPS SRT 2200 with NMC3 and temperature probe set up as redundant UPSs.
"High" temp is set to 24 degrees C, "Maximum" to 27 degrees C.
NMC Logs show server room got to 24 degrees at 8:24 AM ...
I have been Googling like crazy as well as talking to technical support to get information on why when using the NMCSecurityWizardCLI. I was using 1.0.1 as well as 1.0.4. Finally had to contact support...
hello, i need help to decode the following raw status data
Hi,I’ve got an APC SMT750IC on firmware V04.6 that is displaying an update to V15.5 is available but I can’t find any release notes for this major jump in firmware number.Does anyone see similar or hav...
My boss received an email saying " Important Firmware Upgrade for your APC™ Smart-UPS™"
He forwarded it to me to make sure and update our APC UPS.
I went to Schneider/APCs website an downloaded and pat...
I am monitoring an MGE Galaxy 5500 UPS 30kVA , and the following MIBS, which are available on other APC UPS units, are not available on this device. Can you please suggest alternatives for the followin...
Hi,
we have aSmart-UPS SRT 10000 I'm looking to update the firmware on this.. I'm reading conflicting info that it has to be powered off or at least the power outlets do... is this correct or can it be...
Hi guys,I am writing to report a problem with PowerChute SNMPv3 connection on Windows 11 Pro. I have installed the latest version of PowerChute Serial Shutdown on my Windows 11 Pro machine and configur...
Hi There! I am hoping to get some good advice because I am at a loss at the moment.
One of my APC SMART UPS C1500 Batteries has been displaying the L.02 warning on the screen for the past week or so. ...
Current Version - ID1010UPS 05.3
i downloaded and extracted. i can see below files
https://www.apc.com/hk/en/product/AP9630/apc-ups-network-management-card-2/
apc_hw05_aos712_sumx712_bootmon109sumx_7...
Subscribing is a smart move!
You can subscribe to this forum after you log in or create your free account.
Create your free account or log in to subscribe to the forum - and gain access to more than 10,000+ support articles along with insights from experts and peers.