About Yut - Schneider Electric Community

Invite a Co-worker

Send a co-worker an invite to the portal.Just enter their email address and we'll connect them to register. After joining, they will belong to the same company.

Send Invite Cancel

Yut Kijsamnong

Captain

‎2025-02-20

Company :

Yut Kijsamnong

Latest Posts
Likes Given
Latest Contributions
Activity Feed

/html/rank_icons/Captain.png

Yut

ION9000 FTP

I try to do IEC61850 with the ION9000 LVCS but found no ftp my version is. I take a look in the protocol list no FTP.

EcoStruxure Power & Grid icon_circle Metering & Power Quality

2451 0 5

2021-11-04 01:17 AM

/html/rank_icons/Captain.png

Yut

ION8650 /8800 IEC 61850 report control block

We try to connect the ION meter to SCADA/HMI (ION8800/ION8650) using IEC 61850.The SCADA use the CID file from meter as reference urcbMMXU01 to urcbMM...

EcoStruxure Power & Grid icon_circle Metering & Power Quality

6502 0 11

2021-03-02 12:28 AM

/html/rank_icons/Captain.png

Yut

ION 9000 single phase wiring

We sent ION9000 meter to an independent lab for testing. The test set is a single phase source we complete most of the IEC 61000-4-30A except Sag/Swel...

EcoStruxure Power & Grid icon_circle Metering & Power Quality

1931 0 3

2021-02-10 10:48 PM

/html/rank_icons/Captain.png

Yut

Current probe option

Is there any document describe what current channel the option be applied to ?Customer thought the option can be used with I4 they connected probe to ...

EcoStruxure Power & Grid icon_circle Metering & Power Quality

2588 0 6

2020-11-16 01:55 AM

/html/rank_icons/Captain.png

Yut

ION8800 Communication

I am doing experiment to show and confirm to our customer that the ION8800 has multi access capability.Using telnet show something strange.There is DL...

EcoStruxure Power & Grid icon_circle Metering & Power Quality

1916 0 4

2020-09-23 02:14 AM

/html/rank_icons/Captain.png

Yut

ION8800 accuracy drift

I got the yearly test from utility. Is there anything to prevent drifting ? Some of the ION8800 did not pass yearly test the error went to more than 0...

EcoStruxure Power & Grid icon_circle Metering & Power Quality

2817 0 9

2020-08-17 11:34 PM

/html/rank_icons/Captain.png

Yut

MV-90

I try to use ION Setup to work with ION8800 MV-90 as per instruction in the TECHNICAL NOTE 70072-0108-06 06/2011 but fail to locate the menu for MV-...

EcoStruxure Power & Grid icon_circle Metering & Power Quality

1541 0 1

2020-06-29 11:45 PM

/html/rank_icons/Captain.png

Yut

Integrator module

In the ION Reference 7EN02-0290-09 input of the Integrator Module Interval ResetPulsing this input resets the Result, Rollover Count and Trigger Coun...

EcoStruxure Power & Grid icon_circle Metering & Power Quality

1388 0 2

2020-06-25 01:37 AM

/html/rank_icons/Captain.png

Yut

ION8800 error code 400 code 600

I got report from customer by sending Event Log. What could be the problem? 07/11/2019@10:01:37.227SNO.115kV_MEA_2MEventLogCtl 1Diagnostics 1Intern...

EcoStruxure Power & Grid icon_circle Metering & Power Quality

1066 0 1

2019-12-03 02:24 AM

/html/rank_icons/Captain.png

Yut

ION8800B ftp not allow to paste CID file

I open the ftp:// but cannot paste CID file nor from CET850.The firmware is V370 replaced by V370_8800B_61850.upg I used the V362e templates because ...

EcoStruxure Power & Grid icon_circle Metering & Power Quality

1622 0 12

2019-11-27 01:30 AM

/html/rank_icons/Captain.png

Yut

ION8800 TOU

If the TOU module parameter was change during mesurement would there be any error in measurement ? In Thailand we set new holiday into the TOU module ...

EcoStruxure Power & Grid icon_circle Metering & Power Quality

1069 0 4

2019-05-22 10:49 PM

To The Top!

Terms & Conditions Privacy Notice © 2024 Schneider Electric, Inc