Issue  EcoStruxure Automation Expert V21.1 introduces the possibility of using adapters in the basic Function Blocks. Resolution The purpose of this document is to describe, using a simple example, how to use these as adapters. Disclaimer The views and opinions expressed in this article are those of the author(s) and do not necessarily reflect the official policy or position of Schneider Electric.  

Issue When using EcoStruxure Automation Expert V22.1 and AVEVA System Platform the Galaxy project needs to contain all the templates associated with EcoStruxure Automation Expert AppCommonProcess Library, by default the Galaxy backup supplied by EcoStruxure Automation Expert V22.1 is for AVEVA System Platform 2020 R2 SP1. To use a newer version of AVEVA System Platform requires migration. Resolution The following knowledge base article details how to migrate the Galaxy backup supplied by EcoStruxure Automation Expert V22.1 to AVEVA System Platform 2023. The first time EcoStruxure Automation Expert is used to create a AVEVA System Platform Galaxy, it will copy the Galaxy project supplied as part of the installation (called CFLBlankGalaxy) from the ASP Library folder to the AVEVA System Platform BackupGalaxies folder.   Once the Galaxy backup has been copied, it will then create all other projects based upon this backup. The aim is to replace this backup file with a fully migrated version.     Step 1 – Create a temporary EcoStruxure Automation Expert Solution Create a temporary solution and right click on the solution and select Configuration>AVEVA SP Configuration      Give the new Galaxy project any name and click Create   After some time you will notice a message in the Output window saying ‘Galaxy needs to be migrated manually’.   Cancel the System Platform Configuration form.   Step 2 – Migrate the Galaxy project  Open System Platform IDE and select On Server and double click on the project created by EcoStruxure Automation Expert.   A message will be displayed asking if you want to migrate, select Yes   The migration will start and will take some time (around 45 minutes), once the migration is complete click the Close button.   Once the Close button has been clicked you will be asked to log in. The default username and password is Administrator and password left blank.   When the AVEVA System Platform IDE opens, close without making any changes.   Step 3 – Create a Galaxy Backup from the Migrate project  Open the Operations Control Management Console   Navigate to the newly created Galaxy project and right click and select Backup.   Confirm that you want to create a Backup by clicking Yes   Save the backup to a known folder, e.g., Downloads and name it CFLBlankGalaxy     Step 4 – Copy the new CFLBlankGalaxy over the old Copy and Replace the newly-created Backup to the BackupGalaxies Folder     From this point on Automation Expert will create any new Galaxy projects using the migrated CFLBlankGalaxy backup. . Disclaimer The views and opinions expressed in this article are those of the author(s) and do not necessarily reflect the official policy or position of Schneider Electric.  

Objective This article will guide you through the process of preparing an image to have a transparent background when imported onto a Canvas. We'll be using PowerPoint as our image processing tool, but feel free to use any other graphic editor - the concept applies universally. Disclaimer The views and opinions expressed in this article are those of the author(s) and do not necessarily reflect the official policy or position of Schneider Electric.  

Issue Enter issue. Resolution Enter resolution. Disclaimer The views and opinions expressed in this article are those of the author(s) and do not necessarily reflect the official policy or position of Schneider Electric.  

Issue EcoStruxure Automation Expert V22.0 implements a new menu and navigation system. Resolution The aim of this document is to give an overview of the new navigation system and show how to use it. Disclaimer The views and opinions expressed in this article are those of the author(s) and do not necessarily reflect the official policy or position of Schneider Electric.  

Issue An assembly in for Machine Expert Twin needs to follow a structure and implement several default members and an info class. How to easily create the frame for the implementation? Resolution Visual Studio offers the concept of item templates, that support easy creation of project items, based on a template. Disclaimer The views and opinions expressed in this article are those of the author(s) and do not necessarily reflect the official policy or position of Schneider Electric.  

Objective Is it possible to return the current Date/Time from the an EcoStruxure Automation Expert Controller? Resolution The purpose of this article is to show how to get a current DateTime value from controller in EcoStruxure Automation Expert.  

Create User Error with different reaction in EquipmentModules of PD3 Template

Issue Cannot open a project under Project Configuration Tool following the installation of Windows Updates. Cannot start PCT project servers following installation or Windows Updates. Product Line Project Configuration Tool Environment Building Operation Project Configuration Tool (PCT) Cause Configuring Windows Updates for unsupervised installation can result in an ungraceful shutdown of Virtual Box and Project Configuration Tool There have been cases where an ungraceful shutdown of PCT or VBox has resulted in a damaged project or a damaged server within a project. Resolution All projects within the Project Configuration Tool should be shut down prior to the installation of Windows Updates.

Issue Modicon Managed Switch has many different methods to set the IP Address. Resolution The aim of this document is to provide a step by step guide for setting the IP Address for a Modicon Managed Switch using various methods including Out of Band and command line configuration.. Disclaimer The views and opinions expressed in this article are those of the author(s) and do not necessarily reflect the official policy or position of Schneider Electric.  

Issue The aim of this article is to provide a step-by-step guide to configure EcoStruxure Data Expert – Performance in order to establish MQTT communication with Node-RED. Resolution Please see the attachment for further information. Disclaimer The views and opinions expressed in this article are those of the author(s) and do not necessarily reflect the official policy or position of Schneider Electric.  

Background Growing in popularity now is the trend to propagate data into the Cloud. AVEVA Insight Online is one of the featured Applications which we can easily propagate data to and have them displayed as smart data to be viewed anywhere.     When using AVEVA Insight Online as it is, without any added configurations, we usually have our contents displayed in its simplest form as below.   Objective When this knowledge is applied, not only are we able to get the Units of Measurements to show (on the Analog Tags), but we are able to also get Digital Tags to show a descriptive state instead of just ON and OFF.    Disclaimer The views and opinions expressed in this article are those of the author(s) and do not necessarily reflect the official policy or position of Schneider Electric.  

Issue When it comes to dealing with IIoT solutions with EAE, NETIO Basic Function Block is one of the most useful to handle interactions with cloud services. However, the help file does not elaborate in detail how to use it. Resolution Understand how NETIO is to be used for a HTTP Post with an example application. We will also get to see how the response should be handled.   Disclaimer The views and opinions expressed in this article are those of the author(s) and do not necessarily reflect the official policy or position of Schneider Electric.  

Do you wonder how to manage machines via SNMP? This article will explain how to setup SNMP with the IIoT gateway Modicon TM172SI.

This article is purposed to provide step-by-step exercise on how to modify the supervisory communication protocol of an existing EcoStruxure Process Expert project configuration from OPC DA to OPC UA

Issue I want to create a simple timed sequence in EcoStruxure Automation Expert. Resolution The aim of this document is to show how to create linear timed sequences in EcoStruxure Automation Expert. Disclaimer The views and opinions expressed in this article are those of the author(s) and do not necessarily reflect the official policy or position of Schneider Electric.  

Issue Enter issue. Resolution Enter resolution. Disclaimer The views and opinions expressed in this article are those of the author(s) and do not necessarily reflect the official policy or position of Schneider Electric.  

The document provides a detailed guide on configuring the FTPS client in EcoStruxure Operator Terminal Expert (EOTE) using certificate-based validation to enhance secure file transfers between HMI systems and FTPS servers

The purpose of this article is to introduce the necessary steps to configure an additional station in a Lexium™ MC12 Multicarrier application of EcoStruxure Machine Expert.

Issue Have you ever wanted to know how to wire and setup the Harmony XP SUDN safety relay and see the reaction at the monitor output Z1? Resolution This knowledge base article will guide you to achieve this. Disclaimer The views and opinions expressed in this article are those of the author(s) and do not necessarily reflect the official policy or position of Schneider Electric.