Industrial Automation Knowledge Base

Notifications

Industrial Automation Knowledge Base

Access vast amounts of technical know-how and pro tips from our community of Industrial Automation experts.

Search in

Invite a Co-worker

Send a co-worker an invite to the portal.Just enter their email address and we'll connect them to register. After joining, they will belong to the same company.

Send Invite Cancel

Related Forums

Intelligent Devices Forum

Previous Next

Invite a Colleague

Found this content useful? Share it with a Colleague!

Invite a Colleague

Industrial Automation Knowledge Base

Issue The main issue you will face when you trying to manage the secure connection (via SSL encryption) between the SQL Gateway and the Microsoft SQL server running in a VMware Machine is that the generated certificate (also self-signed certificate) will not appear at the Server side. Resolution Please see attached document. Disclaimer The views and opinions expressed in this article are those of the author(s) and do not necessarily reflect the official policy or position of Schneider Electric.

Issue When needed to access a symlink of an equipment that is located inside a SubApp, the path that has to be declared is different than usual. This knowledge base will shoe how to declare and read it Resolution Enter resolution. Disclaimer The views and opinions expressed in this article are those of the author(s) and do not necessarily reflect the official policy or position of Schneider Electric.

Issue The issue of IP address of the Ethernet port and USB port (with the default IP: 192.168.200.1) interfaces of the M262 controller. In some use cases this IP (192.168.200.1) address conflicts with the existing network configuration Resolution Please see attached document. Disclaimer The views and opinions expressed in this article are those of the author(s) and do not necessarily reflect the official policy or position of Schneider Electric.

Issue Using the GroupManagement/GroupControl objects to configure group/subgroup route & sequences – EPE 2021 Resolution This document will help you understand and use the $GroupMGTGP/$GroupCTLGP objects to quickly configure start/stop sequences of assets, routes and also generate subgroups that are part of the main sequence. These objects are part of the “Group Control Library”. Disclaimer The views and opinions expressed in this article are those of the author(s) and do not necessarily reflect the official policy or position of Schneider Electric.

Objective The Alpha Channel in the Properties of some Objects can be used to achieve transparency. We can leverage on this characteristic to create a transparent Button that overlays a Symbol. The Button is then configured to launch a Faceplate. The result is a Graphical Symbol that when clicked, opens a Faceplate which you can then customized for various other operational purposes, such as controlling an asset. Disclaimer The views and opinions expressed in this article are those of the author(s) and do not necessarily reflect the official policy or position of Schneider Electric.

Objective In this KB, we will learn the basics of how to create our own button symbol that can be mapped to a physical digital output. This technique is based on leveraging inbuilt available objects. The knowledge gained will enable us to further develop our own animated symbols using other available graphic objects in the Canvas Designer. Disclaimer The views and opinions expressed in this article are those of the author(s) and do not necessarily reflect the official policy or position of Schneider Electric.

Issue Many AVEVA Industrial Graphic symbols supplied within the AVEVA.IndustrialGraphics library can display the Asset Label (Instance Name), however by default it is not configured. In the following example the Label on the valve symbol should be V003. Resolution The following Knowledge Base article details the steps required to display the Asset Label (Instance Name) on a symbol. Step 1 – Enable the Label display Open the symbol within the CAT and select it. In Properties select the LabelType and set to ObjectTagname Step 2 – Add the ability to enable / display the visibility for the Label Click on the Object, right-click and select Custom Properties. Select the LabelVisible Default value to MyViewApp.Settings.LabelVisible Save and close the Symbol. Create / Update the new template in AVEVA System Platform by using Sync AutoMapped . Once the Template has been created in AVEVA System Platform, use the CAT in your applications and synchronize to System Platform via the normal method, using the Deploy and Diagnostic Tab. Deploy and test - the Label can be turned on and off by selecting the banner symbol at the top Use the Label slide switch to turn Visibility on or off. Disclaimer The views and opinions expressed in this article are those of the author(s) and do not necessarily reflect the official policy or position of Schneider Electric.

Issue The BMENOR2200 can be easily configured to work in non-secure mode and many applications will use this. However, if a more secure connection is required, then this requires some additional configuration. Resolution This document describes the extended configuration required for the module to run and communicate in secure mode. Disclaimer The views and opinions expressed in this article are those of the author(s) and do not necessarily reflect the official policy or position of Schneider Electric.

Issue When reading a string from the logic and displaying it in EcoStruxure Automation Expert, sometimes the user needs to change it from the HMI, it is not natively possible using drag & drop whilst creating a CAT. Resolution This knowledge base will show how to customize and do the C# code to not only read the string from the input, but to allow you to change the string from the HMI and update the output. Disclaimer The views and opinions expressed in this article are those of the author(s) and do not necessarily reflect the official policy or position of Schneider Electric.

Issue I want more precise control of function block execution in EcoStruxure Automation Expert. Resolution The aim of this document is to provide guidance on how to create and use event chains using the two event chain function blocks, EVENTCHAINHEAD and EVENTCHAIN. Disclaimer The views and opinions expressed in this article are those of the author(s) and do not necessarily reflect the official policy or position of Schneider Electric.

Warning Hazard of Electric Shock: Remove all power from all devices before removing any covers or doors of the system. Disconnect power at the device and at the power source. Electrostatic Discharge Required: Always discharge static electricity from your person by touching metal prior to handling any hardware. Failure to do so may result in damage to devices. Potential for Data Loss: The steps detailed in the resolution of this article may result in a loss of critical data if not performed properly. Before beginning these steps, make sure all important data is backed up in the event of data loss. If you are unsure or unfamiliar with any complex steps detailed in this article, please contact Product Support for assistance. Issue Enter issue. Product Line Enter product line. Environment Enter environment. Cause Enter cause. Resolution Enter resolution.

Issue EcoStruxure Automation Expert Platform and related domain tools such as EcoStruxure Automation Expert – Motion must be properly configured to locate the appropriate Git repository and to handle authentication and authorization with the external Git service, such as GitHub Resolution This article has highlighted how to setup and configure the connection between the running EcoStruxure Automation Expert Platform and the GitHub server. Disclaimer The views and opinions expressed in this article are those of the author(s) and do not necessarily reflect the official policy or position of Schneider Electric.

To The Top!

Industrial Automation Knowledge Base

Improve your search experience:

Related Forums

Intelligent Devices Forum

How to Use Safe Force Off with a Lexium Multicarrier

Changing the Firmware of the Lexium™ MC12 Multi Carrier

Implementing SLC Remote Control Visualization in PacDrive Projects

EcoStruxure Machine Expert – Certificate Handling for Microsoft SQL Server Running in a VM

How to Use Superimpose with a Lexium Multicarrier

EcoStruxure Plant Data Expert: Essential - Installing the nodes

How to access a symlink inside a SubApp on Ecostruxure Automation Expert

EcoStruxure Machine Expert – USB-Ethernet IP Address Conflict Resolution

Using the GroupManagement/GroupControl objects to configure group/subgroup route & sequences – EPE 2021

EcoStruxure Automation Expert - Transparent Overlay as Hidden Button

EcoStruxure Automation Expert: Custom Button Symbol to drive a Digital Output

EcoStruxure Automation Expert - enabling the Asset Label (Instance Name) within AVEVA Industrial Graphics

EcoStruxure Machine SCADA Expert - Machine Advisor driver (MACHA)

BMENOR2200 Security Configuration

How to Read and Change a String from the HMI in EcoStruxure Automation Expert

EcoStruxure Automation Expert - Event Chaining

EcoStruxure Automation Expert - Custom CAT’s not communicating

Modicon MCM Fieldbus Communication Module

EcoStruxure Automation Expert Platform - GitHub Configuration Setup

EcoStruxure Operator Terminal Expert – Using FTP to store a project file

Industrial Automation Knowledge Base

Related Forums

Welcome!