How to model a server room

[EcoStruxureIT]

Here is a simple illustration of how to create a server room, add equipment, and configure the power path.

Create server room

In the desktop client, Planning Data Center mode, right click Global and select New > New Server Room.

m01_360012249137.JPG

Give it a name, and then define the room's Floor and Ceiling settings.

m02_360012249137.JPG

Add equipment from the Genome Library to Genomes

In this example the following equipment will be modeled, so will be added to Genomes (from the Genome Library):

• UPS (40 KW)
• PDU (40KW)
• Breaker Modules
• Rack
• Rack PDU
• Server 

m03_360012249137.JPG

Model floor standing equipment 

Drag floor standing equipment (UPS, PDU, and Rack) from Genomes and drop/place it on the opened room floor:

m04_360012249137.JPG

Model rack mounted equipment

Click on the rack, so you can see it in the rack view. Drag equipment (such as rPDU and server) from Genomes into the rack in the rack view:

m05_360012249137.JPG

Name the modeled equipment

To name the modeled equipment, right click the equipment, and then select Properties > General and enter the equipment name:

m06_360012249137.JPG

Configure Power path 

Right click the UPS, and then select Properties > Power and define the connected power comsumer (such as PDU), Redundancy settings (such as A-Feed), and Power Path Color:

m07_360012249137.JPG

Right click the PDU, and select Properties > Power. Define the Output voltage settings:

m08_360012249137.JPG

In the PDU Properties > Power , select Breaker Panel. Click Add panel and then select/define the power consumer(s):

m09_360012249137.JPG

Right the server, and then select Properties > Power and define its power settings/power cable connection:
m10_360012249137.JPG

[nbastien]

How can we clone a server room with all its content and work on it in a planning mode?  We want to start from the existing rack inventory and move equipment for a more optimal layout ...The new layout will then be used to create a new room as part of a datacenter move to a new building

[gsterling]

It is possible in the ITA desktop client to right click on an open room, choose copy. Then you can paste the room and make a copy as long as you paste the room into a separate location (folder) as ITA does not allow the duplicate to be created in the same location folder.

Also, please note any replicated racks will consume licenses. Most attributes are copied, but some are reset like your asset names may be reset to defaults.

Regards

Greg Sterling

[Ninh_NV]

Hello ITA expert,

How can we declare width and length of the room. I did not find any field to do it.

Thanks,

Ninh