APC UPS Data Center & Enterprise Solutions Forum
Schneider Electric support forum for our Data Center and Business Power UPS, UPS Accessories, Software, Services, and associated commercial products designed to share knowledge, installation, and configuration.
Invite a Co-worker
Send a co-worker an invite to the Exchange portal.Just enter their email address and we?ll connect them to register. After joining, they will belong to the same company.
Send Invite Cancel
Label: "racks, rack accessories, & cooling"
View in: "APC UPS Data Center & Enterprise Solutions Forum" | Community
955 Posts | First Used: 2021-06-27
Solved
This was originally posted on APC forums on 9/24/2015Hello,
this is my first post on this forum.
I recently purchased a (rather old) APC switched rack PDU (model AP9210I). The thing is, I can't seem t...
Solved
This was originally posted on APC forums on 1/16/2015Hi all
I have an issue upgrading an AP7920 unit via serial using HyperTerminal (XMODEM_CRC).
I'm just trying to rule out a faulty firmware, but the ...
Solved
This was originally posted on APC forums on 2/28/2019Hi,
I'm trying to download firmware updates for my many AP8953 PDU's, but all I can find on the support site is release notes for v6.6.4
Is anyone...
Solved
This was originally posted on APC forums on 5/9/2012HI,
last week I have purchased a new 1000va SMT Lcd; before I used a backups 1000 APC and there wasn't strange noises.
I have attached a audio file, ...
Solved
This question was originally posted by bob on APC forums on 10/10/2018Hello everybody,
I'm facing an issue to download a firmware upgrades for AP7953.
https://www.apc.com/shop/uk/en/products/Rack-PDU-S...
Solved
This was originally posted on APC forums on 2/13/2019I'm trying to setup snmp v3 with authPriv via cli by following to AP8886X657:
apc>snmpv3 -S enable
E002: Success
Reboot required for change to ta...
Solved
This question was originally posted by Bala on APC forums on 4/28/2008I have some questions about the condensate drain pump in the INROW RC systems. Please clarify.
1. When does the pump starts working...
Solved
This question was originally posted by Rami on APC forums on 9/25/2017Dears,
I have 3 units of ACRD602P with 2 units of AFC.
Could you guide me how to configure the number of AFC?
The units and AFC are...
Solved
This was originally posted on APC forums on 2/9/2012Hello all,
I am programming a little bash script that checks whether a machine is down or not, and if yes, it reboots the machine.
For doing so, it ...
Solved
This was originally posted on APC forums on 9/3/2018Hi All,
I would like your support on how toconfirm the PDU uptime for the below models:
AP8858, AP8953
I have loggedinto thePDU and want to make sure...
Solved
This was originally posted on APC forums on 11/19/2009Hi Folks,
I am wondering whether anyone in this forum have a copy of this firmware they can give a copy, I need it and can't find it anywhere.
Any ...
Subscribing is a smart move!
You can subscribe to this forum after you log in or create your free account.
Create your free account or log in to subscribe to the forum - and gain access to more than 10,000+ support articles along with insights from experts and peers.