It's your place to connect with experts and peers, get continuous support, and share knowledge.
Have you ever wished you could use a single LED when testing your ION 8650, and didn't have to move the pickup between WATTs and VARs? This framework allows you to use the UP and DOWN buttons to switch between WATTs and VARs, and use the VAR LED for …View more
Posted by: N4th4n13L in Power Monitoring and Energy Automation NAM
Find more articles tagged with:
T300Following my previous post on data scaling in our ION meters. I also wanted to discuss an application with another one of our products, the PowerLogic T300. This can be used to quickly validate and compare data points between meter and other devi…View more
Posted by: N4th4n13L in Power Monitoring and Energy Automation NAM
Find more articles tagged with:
Have you ever noticed a wave shape like this, but your meter is saying that it only has 2-2.5% THD!? The below wave shape has been normalized to a peak voltage of 1. The actual waveform was in the 69 kV to 161 kV range. I have not seen this often yet…View more
Posted by: N4th4n13L in Power Monitoring and Energy Automation NAM
Find more articles tagged with:
ION Meters support both DNP and Modbus protocols for SCADA communications, but determining the raw values isn't always straight forward. When scaling is 1 and the input values are within the bounds of the register the raw values will equal the source…View more
Posted by: N4th4n13L in Power Monitoring and Energy Automation NAM
Find more articles tagged with:
The following instructions will help you setup your ION meter with end of day self reads. These are the cumulative registers that MV90 and other billing systems will use for your stop read, and setting them up as end of day reads will ensure that MV9…View more
Posted by: N4th4n13L in Power Monitoring and Energy Automation NAM
Find more articles tagged with:
ION meters are capable of providing dynamic metering solutions for unique installations because they are very flexible and customizable. A few examples are: Net Generation: dynamically applying transformer losses between multiple meters on the low si…View more
Posted by: N4th4n13L in Power Monitoring and Energy Automation NAM
Find more articles tagged with:
Hello everyone, With the release of our latest firmware for the 8650, and other ION meters we've added several security improvements to our meters. Unfortunately, some of our obsolete ION meters are still vulnerable and a firmware solution isn't avai…View more
Posted by: N4th4n13L in Power Monitoring and Energy Automation NAM
Find more articles tagged with:
TRD is Total Rated-Current Distortion and is the total root-sum-square of the current distortion components (including harmonics and inter-harmonics) created by the DER unit expressed as a percentage of the DER rated currenting capacity (Irated). As …View more
Posted by: N4th4n13L in Power Monitoring and Energy Automation NAM
Find more articles tagged with: