Notifications

Join our "Ask Me About" community webinar on May 20th at 9 AM CET and 5 PM CET to explore cybersecurity and monitoring for Data Center and edge IT. Learn about market trends, cutting-edge technologies, and best practices from industry experts.
Register and secure your Critical IT infrastructure

Industrial Automation Knowledge Base

Access vast amounts of technical know-how and pro tips from our community of Industrial Automation experts.

Invite a Co-worker

Send a co-worker an invite to the portal.Just enter their email address and we'll connect them to register. After joining, they will belong to the same company.

Send Invite Cancel

Related Forums

Intelligent Devices Forum

Previous Next

Invite a Colleague

Found this content useful? Share it with a Colleague!

Invite a Colleague

Industrial Automation Knowledge Base

Issue This document outline some of the user experience with respect to supervision project performance while using EcoStruxure Hybrid DCS. Use cases are like slow page update, alarm / trend & communication errors when dealing with large scale projects. There are multiple factors which effects supervision performance, however, can be finetuned with user experience. Majority of them are covered in this document to address such scenario. This gives better understanding and help user to improve supervision performance. Resolution Enter resolution. Disclaimer The views and opinions expressed in this article are those of the author(s) and do not necessarily reflect the official policy or position of Schneider Electric.

Issue There are two available solutions to implement time stamping with EcoStruxure Control Expert, both methods are easy to implement and can be selected for use in almost any circumstance. Applicative – A function block is required for third-party SCADA to convert and read the information System – No programming is required (some components are needed) System and Applicative time stamping modes are exclusive in the same EcoStruxure Control Expert application running in the controllers. In this article, we will investigate the System Time Stamping solution. Resolution System Time Stamping provides a consistent SOE (sequence of events), time stamped at the source, to allow the user to analyse the source of abnormal behaviour in a distributed automation system. The SOE is displayed in an alarm summary or SOE page of a client (such as a SCADA). Each source of time stamped event of the SOE is a discrete I/O value change (transition) detected by a time stamping module, this event is then passed through to OFS and straight to the SCADA. Disclaimer The views and opinions expressed in this article are those of the author(s) and do not necessarily reflect the official policy or position of Schneider Electric.

Issue What to do in case you've forgotten the password of the only administrator account of a portainer instance running inside the Modicon Edge Compute Node and you are unable to log in the portainer web interface? Resolution This article aims to provide a step-by-step guide to reset the password of the original administrator account of a Portainer instance running inside the Modicon Edge Compute Node, using the Portainer reset password helper container. . Disclaimer The views and opinions expressed in this article are those of the author(s) and do not necessarily reflect the official policy or position of Schneider Electric.

Issue MQTT, used for IIOT object communication, mainly uses JSON to encode information. This document will show you how EcoStruxure Automation Expert can handle JSON strings. Resolution Understand JavaScript Object Notation and use the function blocs available in EcoStruxure Automation Expert to create and parse JSON strings. Disclaimer The views and opinions expressed in this article are those of the author(s) and do not necessarily reflect the official policy or position of Schneider Electric.

Issue With the standard real-time data retrieval from controllers using Node Red or EcoStruxure Operator Terminal Expert, we must add Modbus addresses to Unity Pro/EcoStruxure Control Expert variables. This increases the deployment time and effort considering that there may be iterations leading to the final variable list. Since Modbus deals natively with bytes, and the Modbus nodes generally provide data in 16-bit numbers (int, word), they must be further converted to 32-bit types using additional nodes or JS functions. Bit extraction from words also need separate nodes. Often WiFi media is used to connect the EcoStruxure Augmented Operator Advisor App on a tablet to the EcoStruxure Augmented Operator Advisor runtime. The WiFi network and/or WiFi devices may not be secure. Hence, these must be placed in an untrusted zone separated from the trusted SCADA+Controller zone by a firewall. Incoming connections from untrusted zones to trusted zones should be avoided. Outgoing connections from the trusted zone to untrusted zones can be allowed and must be monitored. To protect the controller from accidental/malicious Modbus commands, a deep packet inspection firewall (E.g. Tofino) is required. Resolution As a proof-of-concept, this article proposes to write real-time data from CItect SCADA to the EcoStruxure Augmented Operator Advisor Runtime via HTTP/json commands. This approach can mitigate the issues described above. Disclaimer The views and opinions expressed in this article are those of the author(s) and do not necessarily reflect the official policy or position of Schneider Electric.

Issue The Topology Manager Client-Server model, or Client-Server Architecture, is a distributed application framework dividing tasks between servers and clients, which either reside in the same computer system or communicate through an Ethernet network. It simplifies the automation life cycle by managing multi-controllers with a central repository for all project files and providing visibility of the entire system architecture. How do I set up a central repository to store all the system project files and manage multiple controllers? Toplogy Manager Client-Server Architecture Resolution Technically, there’s no limit to the number of clients. There’s only one installation file that installs both EcoStruxure Control Expert and the Topology Manager. Both server and client files are always installed together. The objective of this article is to offer guidelines for setting up a client-server architecture for Topology Manager. Disclaimer The views and opinions expressed in this article are those of the author(s) and do not necessarily reflect the official policy or position of Schneider Electric.

Introduction The attached document explains the best practice of implementation of FDT/ DTM technologies for integration of smart instruments (HART supported instrumentations) into Automation system architecture Exercise In the exercise, it will have some specific customer requirements scenario. By the completion of this lab the participant will be able to: • To design and to decide the correct place/ platform to implement FDT/DTM in order to answer specific customer requirements in their whole life cycle of the project (engineering/development, commissioning, maintenance and operation • To understand the drawback or limitation for each platform in term of FDT/DTM implementation in order to help participant to decide the correct platform. Disclaimer The views and opinions expressed in this article are those of the author(s) and do not necessarily reflect the official policy or position of Schneider Electric.

Issue Using Modbus serial communication with third-party equipment requires complex logic to manage priorities and diagnostics. Resolution The General Purpose library (GPL) has powerful functions and only needs a simple configuration for the implementation of this communication. This document shows the implementation of a serial Modbus client and scanner communication, in EcoStruxure Process Expert. The GPL library is also available for EcoStruxure Control expert as a standalone library and the two examples described can be easily reused on this software platform. Library link: https://shop.exchange.se.com/en-US/apps/66288/general-purpose-library-v2-for-ecostruxure-control-exp... Disclaimer The views and opinions expressed in this article are those of the author(s) and do not necessarily reflect the official policy or position of Schneider Electric.

Issue The aim of this document is to provide a step by step guide for the installation and setup of EcoStruxure Automation Expert Soft dPAC into a Raspberry PI 4 and deploy a solution from the Buildtime software. Resolution Download the pdf document Disclaimer The views and opinions expressed in this article are those of the author(s) and do not necessarily reflect the official policy or position of Schneider Electric.

Issue The new versions of Ecostruxure Process Expert include libraries based on Situational Awareness. This document will help you in creating a very simple project from scratch Resolution The new versions of Ecostruxure Process Expert include libraries based on Situational Awareness. This document will help you in creating a very simple project from scratch Disclaimer The views and opinions expressed in this article are those of the author(s) and do not necessarily reflect the official policy or position of Schneider Electric.

Background Many of us are experienced EcoStruxure Process Expert (formerly EcoStruxure Hybrid DCS) users. With our extensive experience, we normally just jump straight into any new versions of EcoStruxure Hybrid DCS and we are on our way. However, since EcoStruxure Hybrid DCS 2019, we have a choice to use either the Classic GPL, or the new and widely promoted Situation Awareness GPL. Using these SA GPL correctly requires the use of the correct SA styled page templates in Citect SCADA. This can be a discovery process to some, and it takes time. Objective Objective This video condenses some key knowledges into 3 basic topics to get you started right away. They are: Creating supervision pages in EPE to use SA styled page templates. Configuring the navigation area of SA styled page templates. Different types of SA styled master layouts. Disclaimer The views and opinions expressed in this article are those of the author(s) and do not necessarily reflect the official policy or position of Schneider Electric.

Issue The purpose of this document is to look at how and why devices using the Ethernet/IP protocol need to be managed at a switch level and how these simple settings can help improve system performance. Resolution Please review the document below. Disclaimer The views and opinions expressed in this article are those of the author(s) and do not necessarily reflect the official policy or position of Schneider Electric.

Issue Having an agnostic approach when it comes to automation and decoupling the software from the hardware have been on the mind of many customers and a clear requirement from the industry. Resolution With the latest technology and thanks to a container approach, this is today possible with EcoStruxure Automation Expert runtime. Disclaimer The views and opinions expressed in this article are those of the author(s) and do not necessarily reflect the official policy or position of Schneider Electric.

Objective The objective of this article is to demonstrate how to setup a remote connection with 2 layers of LAN using the M262 controller Resolution Configuring the IP forwarding on the NAT router and well as enabling IP forwarding for the corresponding controllers. In addition, you need configure a static route in the router to tell it how to reach the LAN2. Disclaimer The views and opinions expressed in this article are those of the author(s) and do not necessarily reflect the official policy or position of Schneider Electric.

To The Top!

Industrial Automation Knowledge Base

Related Forums

Intelligent Devices Forum

KB - How to Configure AVEVA Plant SCADA OPC UA Server_R01

EcoStruxure Machine SCADA Expert - How to Create a Report with Data from a Database

How to improve Supervision project performance while using EcoStruxure Process Expert projects

KB - System Time Stamping Solution without Programming

EcoStruxure Machine SCADA Expert - Unit Conversion

Modicon Edge Compute Node - Using Portainer Reset Password Helper

EcoStruxure Automation Expert: How to use JSON

How to link EcoStruxure Augmented Operator Advisor with Citect SCADA

How to Setup Topology Manager Client-Server Architecture

Smart Instrument Integration with PACTware and EcoStruxure Control Expert

EcoStruxure Process Expert: Client and Scanner Modbus serial communication

EcoStruxure Automation Expert – Install Soft dPAC into a Raspberry PI

EcoStruxure Process Expert – Create a Simple Project Based on Situational Awareness

EcoStruxure Process Expert 2020: Jumping in to use Situational Awareness Style Pages

Ethernet/IP and Modicon Switches

EcoStruxure Machine SCADA Expert - Using Python Script

EcoStruxure Automation Expert - Softdpac on Ubuntu

EcoStruxure Machine SCADA Expert - Industrial Graphics Editor Introduction

EcoStruxure Automation Expert - How to Install SoftdPAC on Linux OS

EcoStruxure Machine Expert - How to Setup a Remote Connection with 2 Layers of LAN

Industrial Automation Knowledge Base

Related Forums

This is a heading