- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Report Inappropriate Content
Link copied. Please paste this link to share this article on your social media post.
Accepted Solutions
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Report Inappropriate Content
Link copied. Please paste this link to share this article on your social media post.
Hello @PoE
The Link 150 gateway does not support the monitoring option (like ComX510) for any devices that is connected in serial port.
You can upgrade the latest firmware v5.1.15 for the new web interface from below path,
https://www.se.com/in/en/product-range-download/63423-link150/#/software-firmware-tab
Regards,
Ramasamy N
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Report Inappropriate Content
Link copied. Please paste this link to share this article on your social media post.
Hello @PoE ,
Have you added the device to the Link150? possibly include some screenshots of the config web pages.
BR,
Charles
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Report Inappropriate Content
Link copied. Please paste this link to share this article on your social media post.
Hello @PoE
The Link 150 gateway does not support the monitoring option (like ComX510) for any devices that is connected in serial port.
You can upgrade the latest firmware v5.1.15 for the new web interface from below path,
https://www.se.com/in/en/product-range-download/63423-link150/#/software-firmware-tab
Regards,
Ramasamy N
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Report Inappropriate Content
Link copied. Please paste this link to share this article on your social media post.
Thanks for the advice Mr Ramasamy, i would try to update the firmware and post the result.