Issue
When setting up a Video Server the option for Pelco Type 2 (Endura) can not be selected.
Environment
Continuum V1.91 and above.
See the Video Compatibility matrix for supported Pelco Endura products on the various Continuum versions, link:
Cause
Continuum requires the security key to be enabled for Endura video to allow this option to be available.
Resolution
The Endura option cannot be purchased from the Factory. In order to obtain the Endura option you must contact our Upgrades department. The upgrade part number is: UPG-ADD-ENDURA
You can reach Upgrades by email at upgrades.continuum@schneider-electric.com
Note: for testing purposes a Single User may be run in Demo mode for a few hours which will allow the Endura option to be selected.
