Field Devices Forum
Collaborate with a community of professionals and find answers and discuss anything related to the Field Devices (Sensors, Thermostats, Valves & Actuators and more)
Invite a Co-worker
Send a co-worker an invite to the Exchange portal.Just enter their email address and we’ll connect them to register. After joining, they will belong to the same company.
Send Invite Cancel
-->
Get SP90 PIBCV Smart Actuator news and major contents not to miss
What is Field Devices Forum about?
This forum has been specifically designed to find support about Sensors, Thermostats...
Welcome to the SpaceLogic SP90 PIBCV (Pressure Independent Balancing Control Valves) Smart Actuators Page!
Get SP90 range presentation Video and discover its cutting edge benefits!
The SpaceLogic S...
Hello All.
Can the differential air pressuretransmittersEPP302 be installed in a horizontal position, withelectrical connections downward as shown in the attached photo?
This is not clearly explained i...
Solved
We have two rm3601 controllers, one of which the motor has failed a 24v motor, does anyone know if I can get just a replacement motor, ideally 24v but 230v would also be ok.Is it a standard motor?
Can a 10K thermistor be installed in a class 1 div 2 location? Or are there other sensor/transmitter combinations that could be installed in this environment?It would be wired to an MPx controller outs...
Solved
Good morning all,my customer has the following request: when I have the start from an external thermostat the ventilation can be ON, otherwise it should be OFF (no low speed, completely off).Is there a...
how can i set EPP302 pressure sensor for first use at site (i made all installation instruction however the sensor gives not accurate readings
Solved
I have a Remote flow meter that I want to connect to an M580 PLC using FTP, I cant find a guide on how to do this?The flowmeter needs the following, what values do I use?Server URLPortUsernamePasswordD...
Solved
Hello All.
Could you please give me an information, can we use the SPP110 pressure transmitters to measure compressed air pressure?
Solved
I have an FCU with Analog cool type and on/off heater which has to be controlled with SE8350 TH.Can I connect in BO 8?
Solved
Hello
Mounting instruction of EPD302 predicts mounting on straight air duct. How it works with curved ducts? How long after bending I can mount EPD302? Directly after bending or 5 duct diameters after...
Solved
One of our project requires to submit test certificates of EPD301. wherecan Ifound the related test certificates
A beneficial way to determine proof of operation for fans, pumps and other electrical devices is to use a current sensor. If energy is being consumed and being detected by the current sensor, then it’s...
Subscribing is a smart move!
You can subscribe to this forum after you log in or create your free account.
Create your free account or log in to subscribe to the forum - and gain access to more than 10,000+ support articles along with insights from experts and peers.