PM8000 Register List Not Visible

[huseyinb]

Hi,

Customer has 20 Qty PM8000 they need modbus register list for 3rd Party BMS,

I added register with ION Setup 3.2 but Default and Custom list visible 0,

How can I solve this problem,

[Charles_Murison]

If you set the meter to advanced configuration can you open the modbus slave modules? Are these modules offline? Are the inputs linked to this/these module(s)? If not, does linking the inputs allow the module to be online?

[DanL]

I believe that particular setup wizard in ION Setup is only for user created/customized Modbus registers (via Modbus Slave modules).
I think the customer might be looking for the default Modbus register list for the PM8000 (available on the web)?

[huseyinb]

Thanks, but customer has a lot of arithmetic modules, they need modbus register address for these modules,

[Charles_Murison · Accepted solution]

Hello @huseyinb ,

Until this is fixed in V3.2, you can use V3.1 version of ION Setup.

[huseyinb]

Hi Charles,

Can you share v3.1 setup?

[Romain_Polette]

Hi @huseyinb ,

I do not remember if there is a BOX link to find all release of ION Setup...

In any case, I enclose the release 3.1.19276.01 to this post.

Regards, 

Romain

[huseyinb]

hi @Romain_Polette ,

I don't see enclose file,

[Romain_Polette]

Hello @huseyinb , 

I have edited my post...
Enclosed file was a .exe (forbidden format). I have zipped the install file.

Regards, 

Romain