Ask our Experts
Didn't find what you are looking for? Ask our experts!
Schneider, APC support forum to share knowledge about installation and configuration for Data Center and Business Power UPSs, Accessories, Software, Services.
Search in
Free
EnglishStrengthen your foundational knowledge in Data Centers for free, enroll in this path today and start your learning journey!
Link copied. Please paste this link to share this article on your social media post.
Posted: 2022-08-17 06:41 PM
Hi,
I recently installed an AP9631 management card in my SMX1000 and keep getting the above error. I believe this issue was identified in this FAQ -
https://www.apc.com/ca/en/faqs/FA241461/
What I need is the patch or firmware upgrade to get it resolved.
Thanks,
Brad
Link copied. Please paste this link to share this article on your social media post.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2022-08-17 06:44 PM
Here are the current firmwares:-
UPS 02.2 (ID11)
SUMX v6.9.2
AOS v6.9.2
BOOTMON v1.0.9
Link copied. Please paste this link to share this article on your social media post.
Link copied. Please paste this link to share this article on your social media post.
Posted: 2022-08-18 06:16 AM
You should contact local support for assistance.
Local support contact information will be found at this link.
https://www.apc.com/us/en/support/contact-us/index.jsp
You may need to change the region in the upper left of the contact us web page.
Link copied. Please paste this link to share this article on your social media post.
You’ve reached the end of your document
You have two options to continue your visit.
OR