It's your place to connect with experts and peers, get continuous support, and share knowledge.
Hi,When using the PSE profile editor and wizard to import an IEC61850 device, it creates the .XML file that is used to communicate to the field device. When talking to some devices such as MiCOMs there is a requirement to add some fields into these f…View more
Posted by: sesa207714_brid in Archives: Power Management Systems
Find more articles tagged with:
Hi,We currently have a customer who is complaining about some issues relating to the PM800, PM5350 meters, and neutral connections. Below is some detail on it. Unfortunately we do not have drawings for this, as the customer has been making changes on…View more
Posted by: sesa207714_brid in Metering & Power Quality
Find more articles tagged with:
Hi,Currently I am configuring an EPSS for a customer's site and I am having some issues with the tags displayed within the dropdown list for the Load Data. I have a power meter that is configured for the ATS status, but I am having difficulty alignin…View more
Posted by: sesa207714_brid in Archives: Power Management Systems
Find more articles tagged with:
Hi,Has anyone configured the digital outputs on the ION7650 for either a watchdog, or an Alarm/Event being present on the system?Currently the customer has asked for the ION meters to be configured with a Watchdog/health contact. This will stay close…View more
Posted by: sesa207714_brid in Metering & Power Quality
Hi,We recently deployed ENM on two projects and found that we were doing all of the configuration onsite after receiving servers from the customers. This left us working on the configuration of the alarms right up until the completion of IST.Is there…View more
Posted by: sesa207714_brid in Archives: Power Management Systems
Find more articles tagged with:
Hi,Currently we are working on a project where the customer has requested PM850 with PM8ECC cards, and the system is to be monitored by PME via the ethernet connection, and via a PLC performing load management tasks on the serial port. We tested this…View more
Posted by: sesa207714_brid in Metering & Power Quality
I have recently been playing with an ION7650 using the DNP3 protocol in order to get time stamped digital alarms into PSE7.30 and I've noticed that all of the digital input events seem to be stamped at a 1 second interval. This is backed up by the co…View more
Posted by: sesa207714_brid in Metering & Power Quality
Find more articles tagged with:
Hi,I was going through the user guide for the EGX300 and came across the following section.Which Schneider devices are using the powerlogic protocol? Will this cover all of the Schneider power products such as NSX/NW and Power meters? If it is only r…View more
Posted by: sesa207714_brid in Gateways and Energy Servers
Find more articles tagged with: