- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Report Inappropriate Content
Link copied. Please paste this link to share this article on your social media post.
4'' KNX Display MTN6215-0410 shows strange data waking up from sleep (using screensaver)
Hi, periodically (for now not clear why) displays shows strange date/time first moment waking up from sleep. What it could be?
Video in attach.
BR,
Alex
- Labels:
-
SpaceLogic devices
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Report Inappropriate Content
Link copied. Please paste this link to share this article on your social media post.
Hello Alexander!
Indeed, this looks really strange!
Does it look like this always when you wake it up?
Can you share your settings (project backup) so that we can try to reproduce it?
Thomas
Application Design Engineer
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Report Inappropriate Content
Link copied. Please paste this link to share this article on your social media post.
Hi, settings of my 4" displays at site in attach. At home I have a bit different settings, will set these and check.
Second what can influence this - I use minute resident scripting in SpaceLynk for different time parameters settings/ checking's (dates/times for energy meters date savings, etc.. ). It sends dates/times every minute to the bus... (But at home all is working without problems in the video above.
By the way - what is recommended for date/time sending to devices? I think after SpaceLynk restarting (may be was switched off), and? How precise time in this 4' device (time deviation). What could be recommended for time correction (every hour, midnight, etc?)? My SpaceLynk is used like local NTP server.
Alexander
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Report Inappropriate Content
Link copied. Please paste this link to share this article on your social media post.
Hello Alexander
We were not able to reproduce the behaviour using the shown settings. to analyse further would you please be able to share ETS project and Spacelynk backup?
Many thanks!