Load shedding feature for Wiser Home

[mwillm]

Hello, 

I have just installed Wiser Home to control my electric radiators. Installation was easy and went flawlessly and I find the concept excellent but I encounter a small problem. My apartment is equipped with pilot wire radiators managed by a legacy energy manager with a load shedding function (dated year 2002). If I configure Wiser in pilot wire mode, I loose the load shedding function, which is a problem because this function is important. So I had to leave the pilot wires connected to the centralized load shedder (from which I disconnected the legacy energy manager) and configured Wiser in relay mode.

It would be interesting if Wiser Home could manage load shedding directly, for example using a Zigbee module retrieving teleinfo from the Linky electric meter. This would allow to completely decommission the old load shedder and configure all the radiators in pilot wire mode, instead of having an hybrid system.

Is such a load shedding function based on the teleinfo of the Linky meter planned in the future for wise home?

Best Regards,

Matthieu