Schneider Electric Wiser Forum
Connect with Wiser Smart Home solution experts in the Schneider Electric Wiser forum. Discuss tips on features, updates, installation, and how to get the most out of your Wiser products.
Invite a Co-worker
Send a co-worker an invite to the Exchange portal.Just enter their email address and we’ll connect them to register. After joining, they will belong to the same company.
Send Invite Cancel
Label: "energy management"
View in: "Schneider Electric Wiser Forum" | Community
29 Posts | First Used: 2021-11-04
Dear Wiser user,
Interact with other #Wiser users while staying up to date on the newest news, features, and customer stories.
Have a #Wiser Life!
A whole new #Wiser environment for you to get toget...
Hi,Wiser Room thermostat current temperature is showing only in the multiples of 0.5. is it possible to show it in multiples of 0.1 like every other thermostats.I understand the schedules can only be a...
Just thought I'd share some images showing what we all know- that radiator mounted iTRVs overestimate temperature by a few degrees.This shot shows a working iTRV connected to the vertical radiator and ...
I've recently fitted a Wiser system to my OpenTherm boiler where it has replaced a Weather Compensation on/off system.I'm finding the Wiser system is demanding a very high initial temperature leaving t...
Hello,I have just installed Wiser Home to control my electric radiators. Installation was easy and went flawlessly and I find the concept excellent but I encounter a small problem. My apartment is equi...
Hi All,Only had this system for a week and half but since the last update there have been issues.The flame light is constantly showing on the wireless stat, even though the temperature is .5 to 1 degre...
Can I install the the current sensor clamps on the wires on a single circuit breaker?
I'll start by saying I've only had the Wiser system installed for just over 1 month, and only been in this house for 6 or so months (so no baseline to compare a Winter against). Pleased with the system...
Apologies if this is covered but I have an annoying and noisy problem. Having fitted a Drayton TRV to a newish valve body (approx 5 years use), I am getting a hammer action when the valve set point is ...
I'm trying to unlock Insights+In the app I've completed the validation check. Then it comes up with "Order In Home Display" which opens a web page.Yesterday that web page was the product page for the I...
Since 19th November Insights+ has not been able to collect data from my gas meter. On the Geo Trio Touchbutton, it says that it can't communicate with the gas meter. I know that the gas meter is functi...
Hi I'm new to this forum so apologies if this should be part of another thread.I have installed a six stat system in my parents house and a 14 stat system in my own. Both run combi's and have been runn...
Subscribing is a smart move!
You can subscribe to this forum after you log in or create your free account.
Create your free account or log in to subscribe to the forum - and gain access to more than 10,000+ support articles along with insights from experts and peers.