PM8000 - Extended Waveform Capture ?

[Anonymous user]

In the PM8000 user manual, there is a reference to the meter having "Extended Waveform Capture" capability.  Looking at the Waveform Recorder Modules in Designer, I do not see the settings necessary to configure this.  Is this a mistake in the literature or perhaps it was implemented in a later FW version? omegle xender

[Tom_Stevenson · Accepted solution]

You need at least firmware version 2.1.0.  Here is a thread with more info: https://community.se.com/t5/Metering-Power-Quality/PM8000-Extended-Waveform-Capture/m-p/272703#M5481

Tom