Multiple EGX's on one power supplies

sesa74337_bridg · ‎2013-09-01

Dear Sir/Madam,

Could you please confirm if we can put one power supply for multiple EGX in a enclosure. Even if all the meters and EGX's are in one enclosure.

The following extract and attachment seems to contradict this:

Thank you very much,

Regards,
James Rong

Randi_Dolan · ‎2013-09-04

Hello James,

I am not sure where the "extract" you have provided is from or what this document is referencing. However, in regards to the EGX300, you can provide 24V DC power to multiple EGX300s provided the supply can provide the necessary current to drive the EGX300s. The EGX300 24VDC power supply is isolated from the RS-485 serial port is not used as an electrical reference.

Please let me know if I can be of further assistance.

Randi Dolan

See Answer In Context

Randi_Dolan · ‎2013-09-04

Hello James,

I am not sure where the "extract" you have provided is from or what this document is referencing. However, in regards to the EGX300, you can provide 24V DC power to multiple EGX300s provided the supply can provide the necessary current to drive the EGX300s. The EGX300 24VDC power supply is isolated from the RS-485 serial port is not used as an electrical reference.

Please let me know if I can be of further assistance.

Randi Dolan

sesa74337_bridg · ‎2013-09-04

Thanks very much, Randi

sesa22585 · ‎2013-09-16

James,

Thanks for reaching out on this board for your question. If it has been answered please tag the appropriate response as "the answer" so we know that it helped.

Thanks

Bobbie Jo

sesa74337_bridg · ‎2013-09-16

Sorry, Randi, I forgot to update this,

Thanks for reminding, Bobbie Jo

Have a nice day,

James