Metering & Power Quality
Schneider Electric support forum about Power Meters (ION, PowerTag, PowerLogic) and Power Quality from design, implementation to troubleshooting and more.
Link copied. Please paste this link to share this article on your social media post.
Is it possible to repair/replace faulty LCD displays on ION7550/ION7650 PQ meters? Or is it a case of replace with PM8000/ION9000?
I have a customer who has 8 no. units with blank or faulty LCD displays.
Link copied. Please paste this link to share this article on your social media post.
Hello @solutions_iems- ,
The question as asked is a bit of a loaded question. There is https://www.se.com/ww/en/faqs/FA297835/, the PDF includes the lines
Most parts for the ION7650 have been obsoleted but some distributors may still have stock so could be work asking about FR75XDISP if your meters are older. If your meter is -03 or higher I do not know of a way to do this.
Regards,
Charles
Link copied. Please paste this link to share this article on your social media post.
Hello @solutions_iems- ,
The question as asked is a bit of a loaded question. There is https://www.se.com/ww/en/faqs/FA297835/, the PDF includes the lines
Most parts for the ION7650 have been obsoleted but some distributors may still have stock so could be work asking about FR75XDISP if your meters are older. If your meter is -03 or higher I do not know of a way to do this.
Regards,
Charles
Link copied. Please paste this link to share this article on your social media post.
Create your free account or log in to subscribe to the board - and gain access to more than 10,000+ support articles along with insights from experts and peers.