Did someone have the MIB file for an ION7400 ?

sesa213753 · ‎2016-08-24

IN the user manual says:

"MIB files

Your meter is compliant with MIB-II as defined by the standard MIB file RFC 1213.

SNMP requires that you load your meter’s ION MIB file (available for download

from www.schneider-electric.com) into the NMS.

You must install RFC 1213, which is required to read basic network information for

the meter (for example, TCP/IP traffic or number of packets received), if it is not

included with your SNMP manager software."

But i cant find it.

best regards

Sanjeet_Sahota · ‎2016-08-25

Hi Jorge,

These are generally posted alongside the firmware release and will be on the web for the next firmware release for the ION7400. For now, I have attached it to this message for you to use. I hope this helps.

Regards,

Sanjeet

See Answer In Context

Sanjeet_Sahota · ‎2016-08-25

Hi Jorge,

These are generally posted alongside the firmware release and will be on the web for the next firmware release for the ION7400. For now, I have attached it to this message for you to use. I hope this helps.

Regards,

Sanjeet