Get started with EcoStruxure IT

Getting started with EcoStruxure IT is easy!   Sign up for free, download the Gateway software, and install the app on your phone.   1. Create an EcoStruxure IT account here. 2. Follow the on-screen instructions to download and install the EcoStruxure IT Gateway software.  3. Configure the Gateway software. Checklist and Instructions 4. Install the EcoStruxure IT app on your phone. See how   Get a free trial of EcoStruxure IT Expert   On the web:   1. Log in to your EcoStruxure IT account. 2. Go to Administration    > Subscriptions. 3. Click Start 30 day free trial.       In the mobile app:   Log in and then click the banner.       Are you a partner? See Get started with EcoStruxure IT for Partners  

This checklist will help you make sure you have the necessary information to deploy the EcoStruxure IT Gateway and discover devices successfully. Installing and setting up the EcoStruxure IT Gateway - version 1.10 and newer     Server or VM GW_checkbox_4428097906333.png Server or VM to download and install EcoStruxure IT Gateway on. Not applicable for the EcoStruxure IT Gateway appliance, which comes with the Gateway software preinstalled. System requirements   Device IP addresses You can import a device list in .CSV or .TXT format. You can include SNMPv1, SNMPv3, NetBotz, and Redfish devices in one list. You import a list of Modbus devices separately. GW_checkbox_4428097906333.png List of IP addresses, IP address ranges, or subnets to discover devices on.   File transfer credentials - FTP and/or SCP GW_checkbox_4428097906333.png Username _________________ Password __________________ Port ____________   Device credentials GW_checkbox_4428097906333.png SNMPv1 enabled   Read community name (public is default) ___________________________ Write community name (private is default) __________________________ Port (161 is default) __________ GW_checkbox_4428097906333.png SNMPv3 enabled   The small Gateway configuration can monitor up to 60 SNMPv3 devices total. System requirements EcoStruxure IT Gateway versions older than 1.15 do not allow discovery of SNMPv3 devices with the Authentication type or Encryption type set to None. Note: When AES is configured on the APC NMC, choose AES128 in the Gateway. Username ________________ Authentication type (MD5 or SHA) __________ Authentication password ________________ Encryption type (DES, DES3, AES128, AES192, AES256) ______________ Encryption password ________________ Port (161 is default) _____________ GW_checkbox_4428097906333.png NetBotz   Username ____________________ Password _____________________ Port (80 is default, or 443 with SSL enabled) _____________ GW_checkbox_4428097906333.png Redfish   Username _____________________ Password ______________________ Port (443 is default) ____________ GW_checkbox_4428097906333.png Modbus   For each Modbus device to discover: Device type ___________________ Device vendor _________________ Device family __________________ Server address ____________ For TCP: IP address ____________________ Port (502 is default) _________ For serial: Port _________ Baud rate _________ Data bits __________ Parity __________ Stop bits __________ Flow control __________   SSL certificate If your organization operates an SSL inspection proxy and EcoStruxure IT Gateway does not trust the issuing CA, add the certificate authority's (CA) root certificate to the EcoStruxure IT Gateway trust store. Your IT department can provide the correct root certificate. The certificate must be in PEM format with one of the following extensions: cer, crt, or pem. GW_checkbox_4428097906333.png No certificate needed GW_checkbox_4428097906333.png Certificate file _______________________   Proxy server The Gateway server must use the internet to communicate with EcoStruxure IT. GW_checkbox_4428097906333.png No proxy server needed GW_checkbox_4428097906333.png Proxy server   You can automatically detect the proxy server or configure settings manually. Username _______________ Password ________________ Manual settings: Proxy server address _________________ HTTP port __________________ HTTPS port __________________

IT Expert demo   A self-service product demo that replicates the EcoStruxure IT Expert experience is available on https://se.com/dcim.   This read-only self-service demo is based on a real organization with real data, demonstrating IT Expert functionality in a preconfigured environment - no signup required!   Try the demo!   EcoStruxure IT app demo Install the EcoStruxure IT app on your smartphone to try the app demo, too. Download the EcoStruxure IT app for IOS devices or for Android devices.   IT Expert free trial Like what you see? Click Sign up in the demo to get a free trial of EcoStruxure IT Expert. See Get Started with EcoStruxure IT 

Once you are logged in to EcoStruxure IT, notifications provide tips and recommendations depending on your subscription.   If you subscribe to IT Expert, you'll get announcements about new features and notifications about Gateway software updates and firmware updates for your monitored devices.   If you have a Gateway connected without an IT Expert subscription, you'll only see notifications about Gateway software updates.