Changing Alarm Limit Does Not Immediately Raise an Alarm

Notifications

Community

Notifications

Categories
Forums
Knowledge Center
Blogs
Ideas
Events & Webinars

Share Your Feedback – Help Us Improve Search on Community!
Please take a few minutes to participate in our Search Feedback Survey. Your insights will help us enhance search functionality and deliver the results you need faster and more accurately.
Click here to take the survey
Thank you for helping us build a better Community experience!

Geo SCADA Knowledge Base

Access vast amounts of technical know-how and pro tips from our community of Geo SCADA experts.

Search in

Invite a Co-worker

Send a co-worker an invite to the portal.Just enter their email address and we'll connect them to register. After joining, they will belong to the same company.

Send Invite Cancel

Invite a Colleague

Found this content useful? Share it with a Colleague!

Invite a Colleague

937

Link copied. Please paste this link to share this article on your social media post.

Originally published on Geo SCADA Knowledge Base by Anonymous user | June 09, 2021 08:40 PM

📖 Home Back
Alarms are only raised when the alarm limit is transgressed. So if the limit is changed, to then make the point above (or below as appropriate) the new limit, the alarm will not be raised until the point value has gone below that limit and then been raised above it again.

If you modify one of the alarm limits such that the point value is now in alarm, the alarm will not be generated. This functionality is by design.

Go: Home Back