EcoStruxure Panel Server: new Generation of Gateways (updated October 2024)

[Madleen_Laclef]

Welcome to the EcoStruxure Panel Server Launch Page!

Panel Server is the new generation of gateways now available worldwide, replacing the current ranges of PowerTag Link, PowerTag Link HD, Com'X 210 and 510, Link 150. 

You will find below a summary of key Panel Server assets.

Along time, new assets become available, and this post is updated consistently. So, stay tuned! 

• Latest News! 
  • Discover Panel Server Demo and How to videos and become a Panel Server expert!
  • Rediscover the PAS800 Local export through a new easy to navigate, plug and play layout with our new "Panel Server CSV Data to excel converter" enclosed and discover the procedure here!
• Panel Server firmware Edge 2.0.0 now available -New!
  • Download firmwares and release notes
    • For entry Panel Server: firmware PAS400 and Release Note
    • For Universal Panel Server : firmware PAS600 and Release Note
    • For Universal Panel Server Wired by Design : firmware PAS600WD and Release Note
    • For Advanced Panel Server : firmware PAS800 and Release Note
    • User guide (Both for PAS400, PAS600 and PAS800): User guide PAS 
• Panel Server in 60 secondes to discover how and why EcoStruxure Panel Server is the next-generation energy server that makes power monitoring simple and cyber-secure
• Promotional Video to understand how Panel Server empowers your energy monitoring and network management
• Web page, Promotional & Technical Documents:  Instruction Sheet, User Guide, Cybersecurity Guide, Catalog, Leaflet, and more
• EcoXpert content available for partners: product presentation, spec for tender, killing phrases, Promotional and Technical content
• EcoStruxure Power Design Guide 2021 now including Panel Server
• Panel Server is certified as part of an energy data management system according to ISO 50001, 50002, 50006. Certificate available here.
• Wireless Communication Architectures With EcoStruxure Panel Server - Design Guide 
• Cybersecurity Guide for EcoStruxure Panel Server
• EcoStruxure Power Application note: Energy & Operational Efficiency with Advanced Panel Server 
• PowerLogic Catalgue Panel Server Pages - Discover the Panel Server (Entry, Universal, Advanced) datasheets on se.com 
• Technical eLearning - "EcoStruxure Panel Server Technical Overview" available on the learning platforms for partners, course code BLDECXCS0001035  (direct link for Schneider teams here) 
• Replacement of a Link 150 by a Panel Server- procedures (revision2)   in attachment
• Replacement of a PowerTag Link or PowerTag Link HD by a Panel Server- procedures  in attachment
• EcoStruxure Power Commission - Web (EPC-Web) now available for custom model integration with your Panel Server - Access here
• The Modbus Zip File provides users, installers, and maintenance personnel with the Modbus registers of Panel Server with metering, monitoring, and diagnosis information.
• The Alarm file provides users, installers, and maintenance personnel with the list of alarms available for each devices supported by Panel Server.

The intent of this community is also to let you interact with us and other users worldwide: you can post your questions and feedback here - make sure that you use the "EcoStruxure Panel Server" label for your post.

Looking forward for reading your questions about Panel Servers in this Forum, and bring you Expert answers.

[Anonymous user · Accepted solution]

Hello @Madleen_Laclef,

Thank you for sharing this information with the community.

[Anonymous user · Accepted solution]

Hi @Madleen_Laclef,

Thank you for sharing this information with the community.

[sesa64565_bridg]

Do we know if these new gateways will support ION Pass Through for ION Protocol?

[Madleen_Laclef]

Hi, the Panel Server will only support the modbus map of the ION devices.

FYI - we have added a FAQ page in the "Panel Server catalogue, list of supported devices..." excel file.

[Grant_IPACS]

Hi @Madleen_Laclef  EcoXperts can only access the ext presentation.

[Madleen_Laclef]

Hello Grant, 

Thanks for your interest, for the moment we only have this "external" presentation that we are ready to share with EcoXperts, we will be able to share more with you shortly. Thanks for you for your patience!

[Anonymous user]

Looks good, however one question, all models look like the have WiFi/Bluetooth, what is our option for a gateway where the client will not accept wireless technologies on their site ?

[Madleen_Laclef]

Hi Rich, good question, and I know that this is a common requirement for customers such as datacenters.

In the Panel Server you will have the option to disable all wireless communications (wifi, bluetooth, wireless metering connection), as well as ports or protocols not in used. 

[Anonymous user]

Madleen, Hi

Thanks for that, that's exactly the market we are dealing with, unfortunately i  don't think disabling it will will suffice for the DC clients, for instance we have to order the special Micrologic X with the the wireless communications factory disabled, they just will not allow anything with wireless communications capabilities on the site, disabled or not.

The EGX150 is a great product and works well, we must have used in excess of 1000 on one site alone, I really think there needs to be a basic version with no wireless.

Cheers

[Romain_Polette]

Hello @Anonymous user ,

The MTZ Trip Unit Micrologic Xi has a specific hardware to disable any wireless communication.
For the new generation of Panel Server : I do not know if any specific hardware will be designed for the moment (it seems not planed for 2021).

Regards,

[Anonymous user]

Romain, Hi

Correct, we use the Xi device for several clients, therefore there is no chance they will accept a gateway device with wireless capabilities based on this, in fact we have already had this confirmed by a client who has seen the panel server.

Regards

[Romain_Polette]

@Anonymous user , 

In fact it will depend on the customer.

I have seen some datacenters that are using PowerTag Energy sensors and Smartlink or PowerTag Link Gateways integrated in PDUs or Tap Off to monitor Power / Energy their assets.

So requirements concerning Wireless are not the same for all datacenters.

Regards.

[Anonymous user]

Romain

Of course, i understand that and i can only speak for the DC clients we work with, which are one of the largest CoLo's in the UK and one of the largest global CoLo's, neither will have wireless on site, we may be able to educate them but i doubt it, as i say one has seen the panel server and already stated that it will not be accepted.

It's not an issue as there is plenty of gateways on the market that we can use for these clients, we would rather keep everything Schneider but if that's not possible then we have to use another gateway.

Cheers

[Thierry_Baudard]

Hi Rich and Romain,

I join your dicussion😊

@ Rich: To convince customer, you can explain them that we have several datacenter based on PowerTag system  (Bankia, Ixcelerate, Khazna...). 14000 PowerTags in Khazna. Thanks to its small footprint (no communication wiring/ mounted direcly on the circuit breaker without impact on din rail)  It is really an efficient solution  to monitor a huge number of feeders.  

@ All: because the solution is currently based on PowerTag Link without possibility to connect an  external antenna, we stop to promote the installation in busway and in Canalis Tap-off. However some references of Panel server will offer the possibility to connect an external antenna and  it will probably an opportunity to validate and restart this type of setup!

[Arsyad_Azhari]

Dear,

why the internal document cannot be accessible and the leaflet is empty ?

[Madleen_Laclef]

Hello Arsyad,

Thanks for pointing this out, I have corrected the link to the leaflet and you should now be able to access it: https://schneider-electric.box.com/s/rgccw9qmlc1q0vqibxkjyljo1a7cycmt 

At the moment the documents that are marked as "internal" are only accessible to schneider teams, we will soon open them to Ecoxperts once they are finalized.

Thanks for your interest.

[Guillaume_Evrard]

Hello @Madleen_Laclef ,

Would it be possible to update this table : https://schneider-electric.box.com/s/p9nfozwj2efgdfcskj4q6r0dv0yyr690

It is becoming completely fuzzy !

Thanking in advance,

[swil]

Hi,

Could a link to the software required to commission digital inputs be included in the above?

[Romain_Polette]

Hello @swil , 

Please check this new thread.
https://community.se.com/t5/Gateways-and-Energy-Servers/EcoStruxure-Panel-Server-Edge-1-2/m-p/378731...

Regards.

[Samsher_Yadav]

Hi @Madleen_Laclef ,

With new launch new expectation and challenges come.

Curious customer always want to see the capability of the device so, is there any available demo web page which can be use to demonstrate Universal Panel Server like other gateway have

Com'X510

https://comx510.myenergyserver.com/

[Thierry_Baudard]

NO Panel Support does not support ION protocol.

Panel server support Modbus TCP/IP protocol.

Is is also indicated in roadMap that BacNet will be added but it is for future version and not available today

[conradvr_hexeis]

EcoStruxure Panel Server

Will the PAS devices support the Power Tag Link Displays as a replacement for the original Power Tag Link Gateways?

This is a critical requirement we are to use the PAS instead of the Power Tag Link Gateways.

@AndersonBarzan 

Regards,

[Grant_IPACS]

So is this the death of ION via serial?

[swil]

Please provide details of tested levels of stability for connections to devices for logging. E.g is it equivalent to the ComXs - slower as devices are added. It would be good to have similar information to the attached images.

[Guillaume_Evrard]

Waoh ! I forgot those documents....

[Bojan]

Hi Madleen,

Would you elaborate the following FAQ:"

Panel Server does not directly connect to Power Advisor, Panel Server connects to PME which provides data to Power Advisor.

"

What exactly "connects to PME" means?

Does it include LogInserter functionality, or just Real-Time data?

Best regards,

Bojan

[Romain_Polette]

Hello @Bojan , 

PME stands for Power Monitoring Expert.

Power Advisor is compatible with the data format of PME. Panel Server cannot push data to Power Advisor.

Regards,  

[swil]

Looks like if specific serially connected ION meters have newer firmware ION protocol can be read by PME/ION setup if protocol is set to modbus RTU. @Charles_Murison provided this link in another post

[Grant_IPACS]

thanks @swil  (and @Charles_Murison )

[Samart_Ploypradab]

How to connect Panel server with RS232 cable?

[Thierry_Baudard]

Hello Samart,

There is no native RS232 Connectivity on Panel Server .

The solution is to use the native RS485 connectivity of PAS600 and to add an external third party RS485<->RS232 bidirectional converter.

I cannot advise especially a model/reference because we have not test this archi.

Best regards 

[Romain_Polette]

Hi @Samart_Ploypradab , 

Unlike the Link150 => Panel Server cannot manage RS232 communication.

Regards, 

[swil]

1. Will SFTP publishing be enabled in PAS800 Panel Servers? (previously I thought SFTP was a feature of PAS800)

2. Can instructions on setting up HTTPS file transfer publishing from one or more PAS800 servers to a PME server be provided? 

3. Can instructions on copying PAS800 server logged csv data from PME server to PME server ION database be provided? (i.e. ETL tool configuration for the PAS800 csv files to backfill to PME database where data gaps exist)

[Szymon_Hochół]

Hi @swil ,

1. You mentioned PAS800 twice, I guess you wanted to ask about PAS600. The answer is: SFTP publishing is planned for both of them but with a difference:

  - as an Energy Server, PAS800 will allow you to log 3-years worth of data in its internal memory. You'll be able to publish this data and after that it will still remain inside the gateway to be viewed via emendded web pages.

  - PAS600 has a 1-month buffer of memory used for sending data for cloud applications (this is to protect cloud publication from connection issues). It will be possible to use SFTP publication for this data, but once published it will get flushed. Also, PAS600 will not allow you to view this historical data via web pages.

Please note that SFTP publishing is not available yet, it is planned for v1.5 firmware release.

2. At this point HTTPS is not planned for file transfer between PME and PAS.

3. As of today (v1.3.2) there is no such guide available, as the feature required for such application is not available yet (SFTP publication, planned for v1.5). But you are correct, ETL is the tool for that, one would need to set up an ETL job to take data from the CSV and put it into ION_Data.

BR

[ELKINDI-ZMT]

Hi @Madleen_Laclef 

Thank you for sharing such links

I want to use this PAS as IoT to an Iot Hub , Is there any TVDA or tested way please ?

Should i use PAS600 or PAS800 ?

Thanks in advance 

ZM TAIBI 

[Guillaume_Evrard]

Hello,

Can you explain what you call an IoT hub ?

As of today only publication to our SE ETP platform is available ( Azure Iot Hub).

Kind Regards,

[ELKINDI-ZMT]

 Hi @Guillaume_Evrard 

Thank you for the reply 

this is the link for IoT HUB Overview 

https://learn.microsoft.com/en-us/azure/iot-hub/iot-concepts-and-iot-hub

and Solution architecture 

https://learn.microsoft.com/en-us/dynamics365/field-service/developer/connected-field-service-archit...

I want to know if the PAS600 can work in such solutions and how ? 

Rgds 

[Guillaume_Evrard]

Hello,

I got the confirmation that today only Azure IoT support is limited to the schneider electric own Azure IoT environment called EcoStruxure Technology Platform (ETP).

However non SE third party Azure IoT environment supprort is in the roadmap.

[ELKINDI-ZMT]

Dear @Guillaume_Evrard 

Can you explain more please ?

Azure IoT Hub is a Microsoft Product ; does it work for PAS600 ? 

ZM TAIBI 

[Guillaume_Evrard]

Hello,

Schneider Electric EcoStruxure Technology Platform is relying on Azure IoT for the IoT part. PAS600 by enabling cloud services can connect to EcoStruxure Technology Platform, but today only our Azure IoT environment is supported.

[Antojons]

Now our company using this equipment, it has proven itself well.