ap7723

DCIM_Support · ‎2020-07-03

DCIM_Support · ‎2020-07-03

Hi Stefan,
I guess you might be searching for AP7723 - as you know, this is a rack-mount transfer switch (ATS). Unfortunately modeling a rack ATS, as a power device, is currently not supported in DCO. We have some time ago registered a similar feature request for rack ats support, so I have added you to that existing case.
For the time being you might want to see this shared tip:

hope this helps,
Kind regards

See Answer In Context

DCIM_Support · ‎2020-07-03

Hi Stefan Sturm, Thanks for using the community. Can you add a little more detail to your question or where you trying to search and asked a question by mistake? Best, Stine

DCIM_Support · ‎2020-07-03

Hi Stefan,
I guess you might be searching for AP7723 - as you know, this is a rack-mount transfer switch (ATS). Unfortunately modeling a rack ATS, as a power device, is currently not supported in DCO. We have some time ago registered a similar feature request for rack ats support, so I have added you to that existing case.
For the time being you might want to see this shared tip:

hope this helps,
Kind regards

DCIM_Support · ‎2020-07-03

Hi Jef,

Is there any news about modeling rack ATS as a power device since your answer one year ago? Is it now planned in a coming soon release?? We need to see the power dependency between ATS and powered servers

Best Regards,

Yannick

DCIM_Support · ‎2020-07-03

We are looking into support for rack ATS, but there are no official release date yet.

Once we release such a feature, we will be sure to inform about that in a newsletter from DCIM Support.

DCIM_Support · ‎2020-07-03

Thanks for your quick answer.

It would be appreciated that at least Schneider Electric ATS, like AP7721 or AP7723 will be soon supported

Kind Regards

Yannick

DCIM_Support · ‎2020-07-03

This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.