- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Report Inappropriate Content
Link copied. Please paste this link to share this article on your social media post.
Posted: 2020-07-03 03:21 AM . Last Modified: 2024-04-08 11:59 PM
ap7723
(CID:106205785)
- Labels:
-
Data Center Operation
Link copied. Please paste this link to share this article on your social media post.
Accepted Solutions
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Report Inappropriate Content
Link copied. Please paste this link to share this article on your social media post.
Posted: 2020-07-03 03:21 AM . Last Modified: 2024-04-08 11:59 PM
Hi Stefan,
I guess you might be searching for AP7723 - as you know, this is a rack-mount transfer switch (ATS). Unfortunately modeling a rack ATS, as a power device, is currently not supported in DCO. We have some time ago registered a similar feature request for rack ats support, so I have added you to that existing case.
For the time being you might want to see this shared tip:
hope this helps,
Kind regards
(CID:106205920)
Link copied. Please paste this link to share this article on your social media post.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Report Inappropriate Content
Link copied. Please paste this link to share this article on your social media post.
Posted: 2020-07-03 03:21 AM . Last Modified: 2024-04-08 11:59 PM
Hi Stefan Sturm, Thanks for using the community. Can you add a little more detail to your question or where you trying to search and asked a question by mistake? Best, Stine
(CID:106205798)
Link copied. Please paste this link to share this article on your social media post.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Report Inappropriate Content
Link copied. Please paste this link to share this article on your social media post.
Posted: 2020-07-03 03:21 AM . Last Modified: 2024-04-08 11:59 PM
Hi Stefan,
I guess you might be searching for AP7723 - as you know, this is a rack-mount transfer switch (ATS). Unfortunately modeling a rack ATS, as a power device, is currently not supported in DCO. We have some time ago registered a similar feature request for rack ats support, so I have added you to that existing case.
For the time being you might want to see this shared tip:
hope this helps,
Kind regards
(CID:106205920)
Link copied. Please paste this link to share this article on your social media post.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Report Inappropriate Content
Link copied. Please paste this link to share this article on your social media post.
Posted: 2020-07-03 03:21 AM . Last Modified: 2024-04-08 11:59 PM
Hi Jef,
Is there any news about modeling rack ATS as a power device since your answer one year ago? Is it now planned in a coming soon release?? We need to see the power dependency between ATS and powered servers
Best Regards,
Yannick
(CID:118002353)
Link copied. Please paste this link to share this article on your social media post.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Report Inappropriate Content
Link copied. Please paste this link to share this article on your social media post.
Posted: 2020-07-03 03:21 AM . Last Modified: 2024-04-08 11:59 PM
We are looking into support for rack ATS, but there are no official release date yet.
Once we release such a feature, we will be sure to inform about that in a newsletter from DCIM Support.
(CID:118002380)
Link copied. Please paste this link to share this article on your social media post.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Report Inappropriate Content
Link copied. Please paste this link to share this article on your social media post.
Posted: 2020-07-03 03:22 AM . Last Modified: 2024-04-08 11:59 PM
Thanks for your quick answer.
It would be appreciated that at least Schneider Electric ATS, like AP7721 or AP7723 will be soon supported
Kind Regards
Yannick
(CID:118002441)
Link copied. Please paste this link to share this article on your social media post.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Report Inappropriate Content
Link copied. Please paste this link to share this article on your social media post.
Posted: 2020-07-03 03:22 AM . Last Modified: 2023-10-31 10:15 PM
This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.
Link copied. Please paste this link to share this article on your social media post.
