How to change Unit from F to C in email notification of Rack Monitor

[DCIM_Support]

How to change email notification units from F to degree oC centigrade of Rack monitor 570 sensors email notification,

(CID:130095532)

[DCIM_Support]

When you create the email alert action, select locale for the email.

e.g EN_GB

Creating a send e-mail alert action

In the Basic tab, click Add..., enter E-mail Addresses to which the alert notification is to be sent, select the language and territory using the Locales drop-down list, then click OK.

(CID:130095544)

[DCIM_Support]

Hi Christopherus Laurentius,

Hope you are fine and doing well.  Here is problem still facing

Netbotz Rack monitor’s Sensors notification Alert by email are not configuring in Centigrade. (as already setup Netbotz from DCE alarm actions :  Manage Alarm Action -> Edit -> Locale (changed to English US & English Metric) Sensor graph has changed to Centigrade but still sensor value is showing in Fahrenheit) .

 

(CID:130099589)

[DCIM_Support]

Same as above, but do it under netbotz' alert action, not DCE.

See:

NetBotz Appliance Alert Notifications overview

(CID:130099595)

[DCIM_Support]

Dear Mian Aqeel,

Have you been able to solve your problem, or do you have any more questions about it?

With respect.

(CID:130680478)

[DCIM_Support]

This question is closed for comments. You're welcome to start a new topic if you have further comments on this issue.