EcoStruxure IT forum
A support forum for Data Center Operation, Data Center Expert, and EcoStruxure IT product users to share knowledge on installation, configuration, and general product use.
Invite a Co-worker
Send a co-worker an invite to the Exchange portal.Just enter their email address and we’ll connect them to register. After joining, they will belong to the same company.
Send Invite Cancel
The Data Center Expert 7.9.3 release updates the server operating system to Rocky Linux 8.7.
It is required that youcontact supportto verify you have a valid software support contract before you recei...
Thank you for attending our Virtual User Group meetings! We hope you have found them informative and beneficial to help develop the operations and output from your EcoStruxure IT platforms.
We are hap...
Hello Everyone,
I wanted to take this time to announce that we have released NetBotz v5.3.1.
Netbotz 750/755 v5.3.1 release highlights:
1.) Fix forCVE-2021-44228
2.) Ability to add up to 10 SNMP Tra...
Please refer to Schneider Electric's security bulletin which contains the most up to date information:
https://www.se.com/ww/en/work/support/cybersecurity/security-notifications.jsp
Also see this art...
NBRK0570 running V4_5_1_20151117_1714I am trying to reset the default root password to get access to the WEB UI and connect via Advanced View.The 570 was previously monitored by a DCE server that is no...
Hi !I have a problem with a Netbotz 250 and 150 Pods, it seems that dry contacts and temp/humid sensors that are from the 150 Pods will not appear under the Relay Output Abnormal state or Threshold Vio...
Cameras are working, wireless temp/humidity sensors are working, and two doors/switches connected directly to the 750 are working.However, none of the wired sensors are working as the "Appliance" is re...
Hi team,
Just wanted to ask if anyone know how to resolve this:
I have nb750 with only 5 Dry Contacts connected working fine however on DCE I am unable to select them to set up Thresholds in DCE, the...
To all,We tried to update a Netbotz 750 from version 5.2.2 to 5.3.4 using the Web UI. The upgrade proceeded to the 100% stage and got stuck there for 3 hours. This was done using a local network for co...
The Data Center Expert 7.9.3 release updates the server operating system to Rocky Linux 8.7.
It is required that youcontact supportto verify you have a valid software support contract before you recei...
Solved
I have a customer who wishes to manage a number of remote unmanned sites of which each contain a Netbotz 750 with rack access controls installed. They have a central DCE server and want to use this to ...
Since upgrading the firmware on our NetBotz 250 devices the snmp PRTG Sensors are reporting -1% for Humidity and 0 for Temperature for all of our devices but Data Centre Expert is reporting the correct...
I have APC Netbotz 420e appliance and running firmware version 2.4.2 and looking to see where I can download the latest version. Any suggestions where I can download?
Thank you for attending our Virtual User Group meetings! We hope you have found them informative and beneficial to help develop the operations and output from your EcoStruxure IT platforms.
We are hap...
Solved
Does Schneider have EOL/EOS for NetBotz 250 system?
Subscribing is a smart move!
You can subscribe to this forum after you log in or create your free account.
Create your free account or log in to subscribe to the forum - and gain access to more than 10,000+ support articles along with insights from experts and peers.