Connecting 3rd party Devices Acuvim

[lahiruherath]

Hi,

Has anyone got experience in connecting Acuvim power meters to the Power Monitoring Expert. The model is as follows. Any help would be appreciated. The Acuvim meters are in the system with a dedicated IP. 

Acuvim II – 5A – P1

Best,

Lahiru

[Ken_Hsu]

Hi Lahiruherath,

I connected Accuenergy Acuvim II meters to a PME project a few years ago. I also had trouble finding the correct Modbus table. As I recall, the Acuvim-L user manual modbus register table yielded the correct measurement readings; the Acuvim II Power Meter User manual Modbus table did not. I'm not sure what 5A-P1 stands for. Here is the Acuvim-L User Manual, attached.

This question is unrelated to EEH, though. I suggest moving it to either the PME or Metering forum.

[lahiruherath]

Hi Ken,

Thank you for the feedback. Will try with the new register values. I have no idea on how to move this to another forum now. Any help is appreciated.

Best,

Lahiru