Easy UPS 1-Phase

Affected Revision Levels   Component File Details Easy UPS 1-Phase Application Windows: snst_nmc3_eu1p_3-2-0-6.exe Linux & macOS:  snst_nmc3_eu1p_3-2-0-6.tar.gz UPS Application for Easy UPS models SRV1KL-IN, SRVPM3KRIL-IN, SRVPM2KRIL-IN, SRV1KUXI-IN, SRV2KUXI-IN, SRV3KUXI-IN, SRV1KI, SRV2KI, SRV3KI, SRVPM1KIL, SRVPM2KIL, SRVPM3KIL, SRV1KRI, SRV2KRI, SRV3KRI, SRV2KL-IN, SRV3KL-IN, SRV3KI-E, SRV1KRI-E, SRVPM1KRIL, SRVPM2KRIL, SRVPM3KRIL, SRV1KA, SRV2KA, SRV3KA, SRV1KRA, SRV2KRA, SRV3KRA, SRVLPM1KRIL, SRVLPM2KRIL, SRVLPM3KRIL, SRVSL1KRARK, SRVSL3KRARK, SRV2KRI-E, SRVPM1KIL-E, SRVPM6KRI, SRVPM10KRI, SRVPM10KIL, SRVSPM5KRI, SRV6KUXI-IN, SRV6KL-IN, SRVSVPM5KRIL, SRVSL3KRIRK, SRVLPM3KRIL-IN, SRVPM6KIL, SRVPM10KRIL-IN, SRV10KUXI-IN, SRVLPM3KRIL-IN, SRVSL1KRIRK, SRVSL2KRIRK, SRVSL3KRIRK, SRVLPM6KRIL, SRV15KUXI-IN, SRV20KUXI-IN. For details on upgrading the UPS Network Management Card (NMC) firmware, see the User Guide.    New Features   New Feature Support added for USB to Dry Contact Accessory for NMC (AP9811). Security update The customized .ini file name may optionally contain a CRC32 for integrity checking of the .ini file before processing.   Fixed Issues   Fixed Issue The UPS fault alarm is now triggered only if there is a valid fault code received from UPS. The External battery pack alarm text “battery pack X first level over voltage” is now changed to “Battery pack x full charged”. Newly added External battery pack alarms are now translated to other languages such as Japanese, German, Chinese, French, Italian, Spanish, Portuguese, and Korean. The first login banner message in NMC Web UI is now changed from "This Network Management Card includes a 12-month Support Contract. Firmware upgrades after this period will require an NMC Support Contract. See www.apc.com/upsnmc for more information" to "This Network Management Card includes a 1-year Secure NMC Subscription. Firmware upgrades after this period will require the purchase and activation of a new Secure NMC Subscription. Learn more at apc.com/secure-nmc" The word site map is now correctly translated to the German language. Fake alarm will not get logged when the configurations are changed through config.ini Scheduled shutdown is now not triggered when Signal PowerChute Network Shutdown Clients is enabled. When configuring a scheduled shutdown, now Signal PowerChute Network Shutdown Clients can be disabled and Turn Back On can be set immediately. Security update The following security vulnerability has been addressed in this release: CWE-863: Incorrect Authorization. The Network-Only user can only perform actions in the Web UI relevant to the user access level.   Known Issues   Known Issue The Temperature and Humidity related information is displayed in the Help sections of CLI and Web UI, even though Temperature and Humidity sensors are not supported with AP9811.  AP9811 'Output Relay 2’ parameter values can only be configured using Web UI and SNMP and not via CLI. It is not recommended to change the Normal State of Input Contact from default Open state. The firmware version and model number are not displayed in CLI when AP9811 is connected first time to NMC. It is recommended to disconnect and re-connect AP9811 to NMC in order to read the AP9811 firmware version and model number. ‘Put UPS in Bypass’ command is not available in the Device control commands of the I/O Contact Control Policy page. Events related to Input dry contact and Output relay are displayed only in English language in all NMC interfaces. AP9811 Input dry contact Events are not supported in PCNS. The word “name” and “Vx-rail cluster shutdown error” is only available in English language. “UPS: Deleted a One-Time scheduled shutdown” Event is not correctly translated in Japanese language. Battery pack related events, "Battery pack x full charge" & "Battery pack x remains fully charged" are available only in English language. Some unwanted characters are displayed when Event logs are viewed in French language. Events are not logged for enabling and disabling of Bypass when UPS OFF & Bypass Not allowed configuration settings. During Scheduled Shutdown of UPS, the graceful shutdown of UPS doesn't end at the configured time. Note: This issue is specific to SRV15KUXI-IN. Runtime Calibration does not perform as expected due to discrepancies between the Nominal battery voltage and the Rated battery voltage. Note: This issue is specific to SRVSPM5KRI. When the Runtime Calibration is performed for SRVPM6KRI unit, it does not undergo the Runtime Calibration and displays the critical alarm "The battery is not installed properly” even while the battery is connected.   Hash Signatures   Windows Signatures snst_nmc3_eu1p_3-2-0-6.exe  CRC32 3F588000 CRC64 AD0520F85AD76058 SHA-256 1689AC882BAB5C99024A610FA2562B8118497A55F900AB149268F4E07DEEDC3A SHA-1 94B3D99129A3E77A4CB65DC624DD541E0ABD0E5B BLAKE2sp E877411022DC1CA8E221BE46584E562DD89702321912DEE5942D9D64C4DA5F3E   Linux Signatures snst_nmc3_eu1p_3-2-0-6.tar.gz  CRC32 EC5C51AD CRC64 FED40CA6592A3B10 SHA-256 B58022A876B3BF70ECE7CF5CDABE231300C779A7E0C56AEDE52DBBE225AA9B8E SHA-1 763ED22574B2B5424F7F53C57F64CBFA784A6430 BLAKE2sp A1C9D29B15DA38FC470B8BAEC3B1A26052E7CBD8CEDA50E6107E454F2FAA2B70   macOS Signatures snst_nmc3_eu1p_3-2-0-6.tar.gz  CRC32 05EF7DD0 CRC64 AE9A326DCB1BC6B1 SHA-256 CEC436153188615AE70281CF917AA3C57462CD27778FDF7742D24ECAB6E92AC7 SHA-1 4EEC3851883F3C25D696D2B9EB86B982BD910DFB BLAKE2sp 26B263A2122EB86A564216C616D5A3080E36A50D0D677E8CBE21A3E9090DCAFE

Affected Revision Levels   Component File Details Easy UPS 1-Phase Application Windows: snst_nmc3_eu1p_3-2-0-5.exe Linux & macOS:  snst_nmc3_eu1p_3-2-0-5.tar.gz UPS Application for Easy UPS models SRV1KL-IN, SRVPM3KRIL-IN, SRVPM2KRIL-IN, SRV1KUXI-IN, SRV2KUXI-IN, SRV3KUXI-IN, SRV1KI, SRV2KI, SRV3KI, SRVPM1KIL, SRVPM2KIL, SRVPM3KIL, SRV1KRI, SRV2KRI, SRV3KRI, SRV2KL-IN, SRV3KL-IN, SRV3KI-E, SRV1KRI-E, SRVPM1KRIL, SRVPM2KRIL, SRVPM3KRIL, SRV1KA, SRV2KA, SRV3KA, SRV1KRA, SRV2KRA, SRV3KRA, SRVLPM1KRIL, SRVLPM2KRIL, SRVLPM3KRIL, SRVSL1KRARK, SRVSL3KRARK, SRV2KRI-E, SRVPM1KIL-E, SRVPM6KRI, SRVPM10KRI, SRVPM10KIL, SRVSPM5KRI, SRV6KUXI-IN, SRV6KL-IN, SRVSVPM5KRIL, SRVSL3KRIRK, SRVLPM3KRIL-IN, SRVPM6KIL, SRVPM10KRIL-IN, SRV10KUXI-IN, SRVLPM3KRIL-IN, SRVSL1KRIRK, SRVSL2KRIRK, SRVSL3KRIRK, SRVLPM6KRIL, SRV15KUXI-IN, SRV20KUXI-IN. For details on upgrading the UPS Network Management Card (NMC) firmware, see the User Guide.    New Features   New Feature There is no new feature in this release. Security update The customized .ini file name may optionally contain a CRC32 for integrity checking of the .ini file before processing.   Fixed Issues   Fixed Issue The UPS fault alarm is now triggered only if there is a valid fault code received from UPS. The External battery pack alarm text “battery pack X first level over voltage” is now changed to “Battery pack x full charged”. Newly added External battery pack alarms are now translated to other languages such as Japanese, German, Chinese, French, Italian, Spanish, Portuguese, and Korean. The first login banner message in NMC Web UI is now changed from "This Network Management Card includes a 12-month Support Contract. Firmware upgrades after this period will require an NMC Support Contract. See www.apc.com/upsnmc for more information" to "This Network Management Card includes a 1-year Secure NMC Subscription. Firmware upgrades after this period will require the purchase and activation of a new Secure NMC Subscription. Learn more at apc.com/secure-nmc" The word site map is now correctly translated to the German language. Fake alarm will not get logged when the configurations are changed through config.ini Scheduled shutdown is now not triggered when Signal PowerChute Network Shutdown Clients is enabled. When configuring a scheduled shutdown, now Signal PowerChute Network Shutdown Clients can be disabled and Turn Back On can be set immediately. Security update The following security vulnerability has been addressed in this release: CWE-863: Incorrect Authorization. The Network-Only user can only perform actions in the Web UI relevant to the user access level.   Known Issues   Known Issue The Temperature and Humidity related information is displayed in the Help sections of CLI and Web UI, even though Temperature and Humidity sensors are not supported with AP9811.  AP9811 'Output Relay 2’ parameter values can only be configured using Web UI and SNMP and not via CLI. It is not recommended to change the Normal State of Input Contact from default Open state. The firmware version and model number are not displayed in CLI when AP9811 is connected first time to NMC. It is recommended to disconnect and re-connect AP9811 to NMC in order to read the AP9811 firmware version and model number. ‘Put UPS in Bypass’ command is not available in the Device control commands of the I/O Contact Control Policy page. Events related to Input dry contact and Output relay are displayed only in English language in all NMC interfaces. AP9811 Input dry contact Events are not supported in PCNS. The word “name” and “Vx-rail cluster shutdown error” is only available in English language. “UPS: Deleted a One-Time scheduled shutdown” Event is not correctly translated in Japanese language. Battery pack related events, "Battery pack x full charge" & "Battery pack x remains fully charged" are available only in English language. Some unwanted characters are displayed when Event logs are viewed in French language. Events are not logged for enabling and disabling of Bypass when UPS OFF & Bypass Not allowed configuration settings. During Scheduled Shutdown of UPS, the graceful shutdown of UPS doesn't end at the configured time. Note: This issue is specific to SRV15KUXI-IN. Runtime Calibration does not perform as expected due to discrepancies between the Nominal battery voltage and the Rated battery voltage. Note: This issue is specific to SRVSPM5KRI. When the Runtime Calibration is performed for SRVPM6KRI unit, it does not undergo the Runtime Calibration and displays the critical alarm "The battery is not installed properly” even while the battery is connected.   Hash Signatures   Windows Signatures snst_nmc3_eu1p_3-2-0-5.exe  CRC32 075B1DF9 CRC64 AEB34FC8AF1752A4 SHA-256 02205291D43B8B0EDF5954EDB569E3E1D7152CC28441FB7D2A56C15E69410C01 SHA-1 18F8CCC1AE719F541C2BD1BF58FD689C5118D66A BLAKE2sp 3176B6F01640873EEF862BD01CB268EBC60241E6D1325E205805C5EA4B7BC042   Linux Signatures snst_nmc3_eu1p_3-2-0-5.tar.gz CRC32 158AC146 CRC64 6C5AEF9DFB26D935 SHA-256 EC670AADB6E0BF507D9CCD325A0DF7CF4446C433C671DE3FC9137B98C0314F56 SHA-1 0388ECA2BE7DBF383834AFD746D845BF274A67D0 BLAKE2sp D6D61730BFBF0B74699DCF673BC7736DBC3A53BA2CA4FD16543BC3606C505A97   macOS Signatures snst_nmc3_eu1p_3-2-0-5.tar.gz CRC32 009EBC1E CRC64 9E892A4D4597E5F9 SHA-256 AC30AD4C4B5B251D841B5EB2DED7FBDBF8BE8AC101EE39AF7E0AF6DA554BB90E SHA-1 E9C58BBE53DFC8A9D129E225B85291C120B0BA3E BLAKE2sp 436C5CA893A6BFAB5555CC6FED9579931E02F199A7E3FBFB545638D35A7851D1

Affected Revision Levels   Component File Details Easy UPS 1-Phase Application apc_hw21_eu1p_2-5-1-7. nmc3  UPS Application for Easy UPS models SRV1KL-IN, SRVPM3KRIL-IN, SRVPM2KRIL-IN, SRV1KUXI-IN, SRV2KUXI-IN, SRV3KUXI-IN, SRV1KI, SRV2KI, SRV3KI, SRVPM1KIL, SRVPM2KIL, SRVPM3KIL, SRV1KRI, SRV2KRI, SRV3KRI, SRV2KL-IN, SRV3KL-IN, SRV3KI-E, SRV1KRI-E, SRVPM1KRIL, SRVPM2KRIL, SRVPM3KRIL, SRV1KA, SRV2KA, SRV3KA, SRV1KRA, SRV2KRA, SRV3KRA, SRVLPM1KRIL, SRVLPM2KRIL, SRVLPM3KRIL, SRVSL1KRARK, SRVSL3KRARK, SRV2KRI-E, SRVPM1KIL-E, SRVPM6KRI, SRVPM10KRI, SRVPM10KIL, SRVSPM5KRI, SRV6KUXI-IN, SRV6KL-IN, SRVSVPM5KRIL, SRVSL3KRIRK, SRVLPM3KRIL-IN, SRVPM6KIL, SRVPM10KRIL-IN, SRV10KUXI-IN, SRVLPM3KRIL-IN, SRVSL1KRIRK, SRVSL2KRIRK, SRVSL3KRIRK, SRVLPM6KRIL, SRV15KUXI-IN, SRV20KUXI-IN.  For details on upgrading the UPS Network Management Card (NMC) firmware, see the User Guide on the APC website.    New Features   New Feature Support added on Dell VxRail for PowerChute shutdown feature.   Fixed Issues   Fixed Issue PowerChute clients turn off as expected when Sleep command is issued from the NMC. The NMC Web UI correctly translates “Green Power Function” into Chinese. Battery Discharge issues are no longer visible after the assignment of static IP to NMC AP9544. Note: This issue was specific to SRV10, 15 and 20 KVA (UXI models). The NMC now supports runtime calibration. Note: This issue was specific to SRVLPM6KRIL and SRV15KUXI-IN. The NMC interfaces (Web UI, CLI, SNMP and Modbus) now correctly display a runtime remaining value of 0 for battery disconnection. The LCD also displays the correct value. Note: This issue was specific to SRVLPM6KRIL. The VAC for Bypass Upper Voltage and Bypass Lower Voltage are now correctly displayed in the config.ini. Note: This issue was specific to 1-3kVA SKUs and SRVLPM6KRIL.   Known Issues   Known Issue When configuring a scheduled shutdown, it is not recommended you disable “Signal PowerChute Network Shutdown Clients” or that you set “Turn Back On” to Immediately. External Battery Pack events are only displayed in English in the Web UI. “UPS: Deleted a One-Time scheduled shutdown” event is not correctly translated in the Japanese Web UI. “Name” and “Vx-rail cluster shutdown error” are only displayed in English in the Web UI. Runtime Calibration does not perform as expected due to discrepancies between the Nominal battery voltage and the Rated battery voltage. Note: This issue is specific to SRVSPM5KRI.   Hash Signatures   Signatures apc_hw21_eu1p_2-5-1-7.exe CRC32     C0a053f9 CRC64 B00e640de3ed2687 SHA-256 263d78c9848ae94100420871eb88d7057b4899badf6cb7763d5e985d336e31aa SHA-1     66dbb9145d194aff99636af5b7d7741d4703c6f6 BLAKE2sp 085f06d01f57daa50cdef1fd22670ad7587facfa162cf97b922c790e54e6d211  

Affected Revision Levels   Component File Details Easy UPS 1-Phase Application apc_hw21_eu1p_2-5-0- 8.nmc3 UPS Application for Easy UPS models SRV1KL-IN, SRVPM3KRIL-IN, SRVPM2KRIL-IN, SRV1KUXI-IN, SRV2KUXI-IN, SRV3KUXI-IN, SRV1KI, SRV2KI, SRV3KI, SRVPM1KIL, SRVPM2KIL, SRVPM3KIL, SRV1KRI, SRV2KRI, SRV3KRI, SRV2KL-IN, SRV3KL-IN, SRV3KI-E, SRV1KRI-E, SRVPM1KRIL, SRVPM2KRIL, SRVPM3KRIL, SRV1KA, SRV2KA, SRV3KA, SRV1KRA, SRV2KRA, SRV3KRA, SRVLPM1KRIL, SRVLPM2KRIL, SRVLPM3KRIL, SRVSL1KRARK, SRVSL3KRARK, SRV2KRI-E, SRVPM1KIL-E, SRVPM6KRI, SRVPM10KRI, SRVPM10KIL, SRVSPM5KRI, SRV6KUXI-IN, SRV6KL-IN, SRVSVPM5KRIL, SRVSL3KRIRK, SRVLPM3KRIL-IN, SRVPM6KIL, SRVPM10KRIL-IN, SRV10KUXI-IN, SRVLPM3KRIL-IN, SRVSL1KRIRK, SRVSL2KRIRK, SRVSL3KRIRK, SRVLPM6KRIL, SRV15KUXI-IN, SRV20KUXI-IN.   For details on upgrading the UPS Network Management Card (NMC) firmware, see the User Guide on the APC website.   New Features   New Feature Feature-based licensing for AP9544 has been removed, and you can now access all the NMC's features and functionalities.   Fixed Issues   Fixed Issue While performing the bypass operation via NMC interfaces, the UPS goes into bypass mode as expected when "Signal PowerChute Network Shutdown Clients" is either enabled or disabled. The text "License Activated" and the alarm "UPS Low battery condition exists" are available in all languages in the Web UI. The CLI correctly displays the VAC of Bypass Upper Voltage as 242 and Bypass Lower Voltage as 161. When the putUPSToSleepGracefully(3) value is set for the upsAdvControlUpsSleep SNMP OID, a graceful sleep operation is performed as expected. Support added for SNMP OIDs for External Battery Pack information.   Known Issues   Known Issue The NMC does not support runtime calibration. It is not recommended you use this option. Note: This issue is specific to SRVLPM6KRIL and SRV15KUXI-IN only. The NMC interfaces (Web UI, CLI, SNMP and Modbus) incorrectly displays a runtime remaining value of 0 for battery disconnection. The LCD displays the correct value. Note: This issue is specific to SRVLPM6KRIL only. The VAC for Bypass Upper Voltage and Bypass Lower Voltage are incorrectly displayed in the config.ini. Note: This issue is specific to 1-3kVA SKUs and SRVLPM6KRIL only. When configuring a scheduled shutdown, it is not recommended you disable “Signal PowerChute Network Shutdown Clients” or that you set “Turn Back On” to Immediately.   Hash Signatures   Signatures apc_hw21_eu1p_2-5-0-8.exe CRC32     524ce737 CRC64 936d0d21678cb92e SHA-256 8004023407d84c30fc9bc27593651c45a83ba018e45834eda483ae06a47ecd10 SHA-1     da180d54e54f0eac409b780e8abee1c062dddd44 BLAKE2sp 966e475eabf0296500deb9515b8a55ac2a85f0738d7dc3d611c13650bbc815a1