Urgent: Servers won't power on

[Anonymous user]

Hi Everyone,

I installed the Powerchute application on all servers and performed a graceful shutdown through the Network Management card attached to my SU3000RMXL3U. I had to use the Calkey to reconfigure my UPS batteries. When I powered on my UPS...the servers didn't automatically turn on.

Could you please advise why my servers didn't power on?

Thank you,
D

[Anonymous user · Accepted solution]

ddasilva99 wrote:
Hi Everyone,

I installed the Powerchute application on all servers and performed a graceful shutdown through the Network Management card attached to my SU3000RMXL3U. I had to use the Calkey to reconfigure my UPS batteries. When I powered on my UPS...the servers didn't automatically turn on.

Could you please advise why my servers didn't power on?

Thank you,
D

You mean that you had it setup to turn off UPS after graceful shut down, right?

If you want the computers to start up on its own upon being plugged in/UPS turned on, there's usually an option in the computer's BIOS.