APC PDU-AP7921B-unable to access via HTTPS

[Shampad_apc]

This was originally posted on APC forums on 1/29/2019

---

We want to deployment APC PDUs in our production environment , while configuring it in the lab , it is found that we are unable to access via https . 

Please suggest us remedy to access via https ?

[B-DoubleE_apc · Accepted solution]

This was originally posted on APC forums on 1/30/2019

---

Hi Shampad,

There are a few steps required before HTTPS will work - specifically it needs to be enabled in the interface under "Configuration --> Network --> Web -> Access". By default the card will create a self-generated certificate, and will be configured for TLS 1.1 - depending on your environment and browser configuration you might need to change the "minimum protocol" to TLS 1.2.