Locating alarms on failing equipment in the layout

[EcoStruxureIT]

Locating alarms on failing equipment in the layout

When configured, the system shows alarms from external system devices associated with modeled components in the layout, e.g. a UPS or rack PDU.

In Operations (accessed in the Application bar Data Center>Operations😞
1. View alarms in the layout by selecting the Room Layout icon, and clicking the Alarms tab to see any associated devices in alarm state highlighted on the modeled components in the layout.

• Yellow: Warning
• Red: Error, Critical, and Failure
  If more alarms occur on a piece of equipment, the component is highlighted according to the alarm with the highest priority; and if there is an alarm on a rack PDU, the rack is highlighted.

2. Right-click the alarm in the Alarms pane, and select Show in Navigation or Show in Layout to identify and highlight the component with the alarm in the Room Layout, or Navigation.