Trio How-To Videos

[Joel_Weder]

The Schneider Electric YouTube channel has helpful short videos discussing features and capabilities of many of our products and solutions. You can find our channel, and subscribe if you like, simply by going to youtube.com and doing a search for "Schneider Electric channel."  

Numerous Trio videos have already been created, and more are coming. Here is a list of videos as of March 2020:

Quick-Start Videos:
Trio Q Series Licensed Radio – Wizard Demonstration               https://www.youtube.com/watch?v=O2orINBzzyE

Trio K Series License-Free Radio – Wizard Demo                       https://www.youtube.com/watch?v=I1uZ7ZB2vBw

Trio M Series Licensed Radio - Basic Configuration                   https://www.youtube.com/watch?v=UvHjz-NOBwE

Trio J Series Configuration and TView+ Diagnostics                   https://www.youtube.com/watch?v=9bz_TpZYn40

General Ethernet Radio Info:
Trio Ethernet Radios – Internal Diagnostic Features                   https://www.youtube.com/watch?v=xDkGOsxPxIU

Trio Ethernet Radios - Modbus Gateway and Serial Server        https://www.youtube.com/watch?v=Ys-HNGLQv0k

Q Series Data Radio:
Global Firmware Updating for the Trio Q Data Radio                 https://www.youtube.com/watch?v=wgtK_jl_YnA

Trio Q Data Radio – IP Routing Benefits & Configuration           https://www.youtube.com/watch?v=sot8NgDrusw

Trio Q Series Licensed Radio – Dynamic Speed Mode              https://www.youtube.com/watch?v=qohNvrQgrHg

Trio Q VHF Data Radio - Advantages and New Features           https://www.youtube.com/watch?v=cl8yL1aPJQ8

Trio Q Data Radio Alarms and Events                                        https://www.youtube.com/watch?v=GzxzoiLm8Qc
Trio Q Data Radio Compatibility with Trio E Series                     https://www.youtube.com/watch?v=zlPooeEyOgk
Trio Q Data Radio - Multi-User Access                                       https://www.youtube.com/watch?v=U0uyjl_6hSA

The Trio Q Data Radio Text User Interface                                 https://www.youtube.com/watch?v=vILlyk5CAC0

Create a Trio Q Data Radio Point to Point Network                     https://www.youtube.com/watch?v=iEkbF11g-No

J Series Data Radio:

Trio J Data Radio - Setup a Point to Point Network                     https://www.youtube.com/watch?v=FPbFYjj8KWY

Trio J Data Radio Spectrum Analyzer & Channel Lockout          https://www.youtube.com/watch?v=g8Sv88mxkj0

[Omaelk]

Thanks for sharing this playlist of videos @Joel_Weder 🙂

[MartinChartrand · Accepted solution]

Thanks Joel. Further to your post, a new Trio Data Radios playlist has been created on our YouTube channel for all the current videos and videos to come.

Please use this link and bookmark the playlist in your browser:

https://www.youtube.com/playlist?list=PLa7UGrWOTyjlpwf0J9GEFDovU9vFKYM6l

Regards,

Martin Chartrand

SCADA & Telemetry Solution Specialist

[Rich-C]

Hello, I am having a hard time mapping trio jr900 access point radio to geo scada. can you help with this?

[Joel_Weder]

Hello Rich,

Can you please be more specific?  What do you mean by "mapping" ?  Are you just trying to use the JR900 radios to transport Ethernet traffic between Geo SCADA and some end devices? The radios are really just transparent, and there is a Wizard mode in Setup to help with that. (plus a few videos on YouTube)

Or are you attempting to set up diagnostics for the Trio radios within Geo SCADA? If this is what you mean, you can do it either of two ways:

- make use of the already-created template and modify it as needed. (I can send that if desired)

- Or configure manually with a Trio channel, Set, Radio and points, then use those as any points would normally be displayed

[Rich-C]

My apologies, Yes I am trying to set up diagnostics for the trio radios in Geo Scada. I already have the Tview+ Diagnostics software installed and working perfectly. 

 I would like to configure manually with a Trio channel, Set, Radio and points.

Thanks again Joel. 

[Joel_Weder]

I will post a new forum topic with a more appropriate title, so others can find and make use of this information also. It will be called "Geo SCADA Diagnostics for Trio J Series"  Will be posted shortly.

[Rich-C]

Great.

Thanks again for the quick response.