App Note: SNMP Polling Trio Q Radios with SCADAPack 47xi and Node-RED

[Joel_Weder]

Recently released on the Schneider Electric website:

An application note describing in detail how to configure Node-RED, running in an Edge docker of a SCADAPack 470i or 474i, to poll Trio Q data radios for their diagnostic information using the SNMP protocol. SNMP is commonly used by IT professionals to monitor the status of network-connected devices. The app note offers both a Quick Start method, using pre-configured files, and a more detailed discussion of manually performing the configuration. 

Here is a link to the App Note document:

https://www.se.com/myschneider/documentsDownloadCenter/detail?id=SNMP_Polling_Trio_Q_AppNote

And here's a link to the related files:

https://www.se.com/myschneider/documentsDownloadCenter/detail?id=SNMP_Polling_Zip_Files

The document assumes that you are familiar with "SCADAPack 47xi App Note – Building a Node-RED Installation.pdf", and that your SCADAPack 47xi has been configured and tested as per that document. If not, download the document and complete its exercises before working through this application. See https://www.se.com/us/en/product-range/35344468-scadapack-47x-47xi/?parent-subcategory-id=6040&filte...

The related files used in the Building a Node-RED Installation App Note are required. These include the demonstration Node-RED flows.json file, the accompanying SCADAPack project file and others. Download these files from: https://www.se.com/us/en/product-range/35344468-scadapack-47x-47xi/?parent-subcategory-id=6040&filte...

[Joel_Weder · Accepted solution]

Contact the Remote Operations Application Support team if any questions or concerns with this App Note.

RemoteOperations@se.com

NOTE: This address is NOT for general post-sale technical support issues.