Is possible to saving the meter dcf by command mode ?

[Eddic]

People usually saving the meter dcf with ION Setup but is possible to run the ion setup by command mode to doing the samething?

[Robert_Lee · Accepted solution]

If you are referring to can you save DCF files using the scripting engine, then yes it is possible but requires a high sophistication and understanding on how this is done (and requires some high automation on the part of whatever is creating/issue the scripting text files).

[Eddic]

Thanks Robert.

I am agreed that may need a sophistication on the script, is possible to shared some info to us?

[Robert_Lee]

If you are already familiar with how scripting works, then you need to use a script function code 3 to "save" a DCF file from the meter followed by the full path to where you wish to save the DCF file to:

Ex. Request1=3,C:\ProgramData\Schneider Electric\ION Setup\Templates\ION8650\ION8650_FAC_V420.DCF

[JamesAZZO]

Rob - how is that JDX automation stuff going?