ION9000/PM8000/ION7400 v2.1.0 (SP1) Firmware and Documentation now Available!

[Matt_Curry]

New firmware for the ION9000/PM8000/ION7400 is now available along with the required instructions to apply it.  Please refer to the "What's New" documentation for what is available in this new release: 

ION9000

-ION9000 series firmware version v2.1.0 is now available: https://www.schneider-electric.com/en/download/document/ION9000_V002.001.000/

-ION9000 series firmware upgrade procedure v2.1.0: https://www.schneider-electric.com/en/download/document/7EN72-0203/

-What’s new in ION9000 series meter firmware v2.1.0: https://www.schneider-electric.com/en/download/document/7EN12-0318/ 

-ION9000 series user manual: https://www.schneider-electric.com/en/download/document/7EN02-0390/

Important: You must have ION Setup 3.1 or later to upgrade the meter firmware.  Available on SE.com here:  https://www.schneider-electric.com/en/download/document/ION_Setup_Latest_Release/

PM8000

-PM8000 series firmware version v2.1.0 is now available: https://www.schneider-electric.com/en/download/document/PM8000_V002.001.000/

-PM8000 series firmware upgrade procedure v2.1.0: https://www.schneider-electric.com/en/download/document/7EN72-0203/

-What’s new in PM8000 series meter firmware v2.1.0: https://www.schneider-electric.com/en/download/document/7EN12-0316/ 

-PM8000 series user manual: https://www.schneider-electric.com/en/download/document/7EN02-0336/

Important: You must have ION Setup 3.1 or later to upgrade the meter firmware.  Available on SE.com here:  https://www.schneider-electric.com/en/download/document/ION_Setup_Latest_Release/

ION7400

-ION7400 series firmware version v2.1.0 is now available: https://www.schneider-electric.com/en/download/document/ION7400_V002.001.000/

-ION7400 series firmware upgrade procedure v2.1.0: https://www.schneider-electric.com/en/download/document/7EN72-0203/

-What’s new in ION7400 series meter firmware v2.1.0: https://www.schneider-electric.com/en/download/document/7EN12-0317/ 

-ION7400 series user manual: https://www.schneider-electric.com/en/download/document/7EN02-0374/

Important: You must have ION Setup 3.1 or later to upgrade the meter firmware.  Available on SE.com here:  https://www.schneider-electric.com/en/download/document/ION_Setup_Latest_Release/

Additional Document Update:

-RD96 Display firmware upgrade technical note https://www.schneider-electric.com/en/download/document/7EN72-0202/

[Matt_Curry · Accepted solution]

Just an update that ION Setup 3.1 will be available on the SE.com website by Friday, March 15th, 2019.  I will update this post once available there.

[Matt_Curry]

Latest version of ION Setup required for this upgrade has been posted to se.com and linked in this original announcement

[Charles_Murison]

Is there an update ION Device template reference for this firmware?

[Arsyad_Azhari]

hai Matt,

i want to ask,

in the technical notes, the firmware upgrade support from v1.4.3

is it possible to upgrade if my PM8000 firmware version is v1.4.0 ?

[Romain_Polette]

Hello @Arsyad_Azhari 

I failed to upgrade from 1.3.1 to 2.1 (not tried with 1.4.0).

I recommend to upgrade to 1.4.3 before uploading the 2.1 FW.

My configuration was a PM8000 with the RMD.

Do not forget to use ION Setup 3.1.19143.01 or later.

Regards, 

Romain

[Charles_Murison]

Do not have to go V1.4.0->V1.4.3 -> 2.1, does not hurt to do this but not required.
Any version before 1.4.0, recommend going to V1.4.3 before upgrading to V2.2