ION 8650 Watchdog Contact

[SESA439645]

Hello guys!

I have a protection relay monitoring a contact from an ION8650. This contact is supposed to act like a watchdog (normally closed behavior), so when I shut down the meter or it presents some fail, this contact should close and give an indication on my relay. Do you guys know how I can configure this contact?

Thanks in advance!

Best regards.

[Charles_Murison · Accepted solution]

Hello @SESA439645 ,

The relay output of ION8650 is controlled with a digital output module. This module could be controlled with a Boolean status input or with pulse inputs to the pulse ON/OFF inputs.

Regards,

Charles